- First stab at running linuxbios without the old static device tree.

  Things are close but not quite there yet.


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1681 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 83 insertions, 9 deletions

diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb
index 1406a48b86..5bb0bc3485 100644
--- a/src/mainboard/arima/hdama/Options.lb
+++ b/src/mainboard/arima/hdama/Options.lb
@@ -34,16 +34,32 @@ uses MAINBOARD_VENDOR
 uses MAINBOARD
 uses LINUXBIOS_EXTRA_VERSION
 uses _RAMBASE
+uses CC
+uses HOSTCC
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
 
 
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE=524288
-
 ###
 ### Build options
 ###
 
 ##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default ROM_SIZE=524288
+
+##
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+##
+default FALLBACK_SIZE=131072
+
+##
 ## Build code for the fallback boot
 ##
 default HAVE_FALLBACK_BOOT=1
@@ -123,6 +139,10 @@ default HEAP_SIZE=0x4000
 ## Only use the option table in a normal image
 ##
 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
 default _RAMBASE=0x00004000
 
 ##
@@ -130,5 +150,61 @@ default _RAMBASE=0x00004000
 ##
 default CONFIG_ROM_STREAM = 1
 
+###
+### Defaults of options that you may want to override in the target config file
+### 
+
+##
+## The default compiler
+##
+default CC="gcc"
+default HOSTCC="gcc"
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG      1   system is unusable               
+## ALERT      2   action must be taken immediately 
+## CRIT       3   critical conditions              
+## ERR        4   error conditions                 
+## WARNING    5   warning conditions               
+## NOTICE     6   normal but significant condition 
+## INFO       7   informational                    
+## DEBUG      8   debug-level messages             
+## SPEW       9   Way too many details             
+
+## Request this level of debugging output
+default  DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default  MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
+### End Options.lb
 end
diff --git a/src/mainboard/arima/hdama/chip.h b/src/mainboard/arima/hdama/chip.h
index ba52d6dbdb..c3792f41e9 100644
--- a/src/mainboard/arima/hdama/chip.h
+++ b/src/mainboard/arima/hdama/chip.h
@@ -1,4 +1,4 @@
-extern struct chip_control mainboard_arima_hdama_control;
+extern struct chip_operations mainboard_arima_hdama_ops;
 
 struct mainboard_arima_hdama_config {
 	int nothing;
diff --git a/src/mainboard/arima/hdama/mainboard.c b/src/mainboard/arima/hdama/mainboard.c
index 81f82b3d75..78b8715640 100644
--- a/src/mainboard/arima/hdama/mainboard.c
+++ b/src/mainboard/arima/hdama/mainboard.c
@@ -9,7 +9,6 @@
 #include <delay.h>
 
 #include <arch/io.h>
-#include <device/chip.h>
 #include "../../../northbridge/amd/amdk8/northbridge.h"
 #include "../../../northbridge/amd/amdk8/cpu_rev.c"
 #include "chip.h"
@@ -312,13 +311,12 @@ static struct device_operations mainboard_operations = {
 	.enable           = 0,
 };
 
-static void enumerate(struct chip *chip)
+static void enable_dev(struct chip *chip)
 {
 	dev_root.ops = &mainboard_operations;
-	chip_enumerate(chip);
 }
-struct chip_control mainboard_arima_hdama_control = {
-	.enumerate = enumerate, 
+struct chip_operations mainboard_arima_hdama_ops = {
 	.name      = "Arima HDAMA mainboard ",
+	.enable_dev = enable_dev, 
 };