- 1.1.4

  Major restructuring of hypertransport handling.
  Major rewerite of superio/NSC/pc87360 as a proof of concept for handling superio resources dynamically
  Updates to hard_reset handling when resetting because of the need to change hypertransport link
    speeds and widths.
    (a) No longer assume the boot is good just because we get to a hard reset point.
    (b) Set a flag to indicate that the BIOS triggered the reset so we don't decrement the
       boot counter.
  Updates to arima/hdama mptable so it tracks the new bus numbers


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 11 insertions, 11 deletions

diff --git a/src/mainboard/arima/hdama/mptable.c b/src/mainboard/arima/hdama/mptable.c
index 856288590d..94ac735744 100644
--- a/src/mainboard/arima/hdama/mptable.c
+++ b/src/mainboard/arima/hdama/mptable.c
@@ -36,40 +36,40 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
 	smp_write_processors(mc, processor_map);
 
 	{
-		struct pci_dev *dev;
-		uint32_t base;
+		device_t dev;
+
 		/* 8111 */
-		dev = dev_find_slot(0, PCI_DEVFN(0x03,0));
+		dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
 		if (dev) {
 			bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
 			bus_isa	   = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
 			bus_isa++;
 		}
 		else {
-			printk_debug("ERROR - could not find PCI 0:03.0, using defaults\n");
+			printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
 
 			bus_8111_1 = 3;
 			bus_isa = 4;
 		}
 		/* 8131-1 */
-		dev = dev_find_slot(0, PCI_DEVFN(0x01,0));
+		dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
 		if (dev) {
 			bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
 
 		}
 		else {
-			printk_debug("ERROR - could not find PCI 0:01.0, using defaults\n");
+			printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
 
 			bus_8131_1 = 1;
 		}
 		/* 8131-2 */
-		dev = dev_find_slot(0, PCI_DEVFN(0x02,0));
+		dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
 		if (dev) {
 			bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
 
 		}
 		else {
-			printk_debug("ERROR - could not find PCI 0:02.0, using defaults\n");
+			printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
 
 			bus_8131_2 = 2;
 		}
@@ -85,17 +85,17 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
 
 	smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
 	{
-		struct pci_dev *dev;
+		device_t dev;
 		uint32_t base;
 		/* 8131 apic 3 */
-		dev = dev_find_slot(0, PCI_DEVFN(0x01,1));
+		dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
 		if (dev) {
 			base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
 			base &= PCI_BASE_ADDRESS_MEM_MASK;
 			smp_write_ioapic(mc, 0x03, 0x11, base);
 		}
 		/* 8131 apic 4 */
-		dev = dev_find_slot(0, PCI_DEVFN(0x02,1));
+		dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
 		if (dev) {
 			base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
 			base &= PCI_BASE_ADDRESS_MEM_MASK;