summaryrefslogtreecommitdiff
path: root/src/mainboard/amd
diff options
context:
space:
mode:
authorPatrick Georgi <patrick.georgi@coresystems.de>2010-03-18 16:18:58 +0000
committerPatrick Georgi <patrick.georgi@coresystems.de>2010-03-18 16:18:58 +0000
commit776b85ba457ff82f795c6c65b5574ef27e611097 (patch)
treeba3ddce3ac37c4edb8e3105390e4de959eba3ca9 /src/mainboard/amd
parenta41b939294c2e90197c57a2faa565bf48d4b506d (diff)
Remove fallback/normal handling in mainboards'
romstage.c like r5255 did for failover/fallback/normal mainboards. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5257 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/amd')
-rw-r--r--src/mainboard/amd/dbm690t/romstage.c58
-rw-r--r--src/mainboard/amd/mahogany/cache_as_ram_auto.c239
-rw-r--r--src/mainboard/amd/mahogany/romstage.c59
-rw-r--r--src/mainboard/amd/pistachio/romstage.c59
4 files changed, 26 insertions, 389 deletions
diff --git a/src/mainboard/amd/dbm690t/romstage.c b/src/mainboard/amd/dbm690t/romstage.c
index 697319356f..7f5a2700e7 100644
--- a/src/mainboard/amd/dbm690t/romstage.c
+++ b/src/mainboard/amd/dbm690t/romstage.c
@@ -100,60 +100,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb600_lpc_port80(); */
- sb600_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -161,6 +111,14 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb600_lpc_port80(); */
+ sb600_pci_port80();
+ }
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
diff --git a/src/mainboard/amd/mahogany/cache_as_ram_auto.c b/src/mainboard/amd/mahogany/cache_as_ram_auto.c
deleted file mode 100644
index 9538611e95..0000000000
--- a/src/mainboard/amd/mahogany/cache_as_ram_auto.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-#define RAMINIT_SYSINFO 1
-#define K8_SET_FIDVID 1
-#define QRANK_DIMM_SUPPORT 1
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-#define RC0 (6<<8)
-#define RC1 (7<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-
-#define ICS951462_ADDRESS 0x69
-#define SMBUS_HUB 0x71
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-
-#define post_code(x) outb(x, 0x80)
-
-#include <cpu/amd/model_fxx_rev.h>
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/ite/it8718f/it8718f_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#include "southbridge/amd/rs780/rs780_early_setup.c"
-#include "southbridge/amd/sb700/sb700_early_setup.c"
-
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
-/*called in raminit_f.c */
-static inline int spd_read_byte(u32 device, u32 address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "northbridge/amd/amdk8/raminit_f.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "cpu/amd/car/copy_and_run.c"
-#include "cpu/amd/car/post_cache_as_ram.c"
-
-#include "cpu/amd/model_fxx/init_cpus.c"
-
-#include "cpu/amd/model_fxx/fidvid.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-#include "northbridge/amd/amdk8/early_ht.c"
-
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb700_lpc_port80(); */
- sb700_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
- int needs_reset = 0;
- u32 bsp_apicid = 0;
- msr_t msr;
- struct cpuid_result cpuid1;
- struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
- if (bist == 0) {
- bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
-
- enable_rs780_dev8();
- sb700_lpc_init();
-
- it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
- printk_debug("bsp_apicid=0x%x\n", bsp_apicid);
-
- setup_mahogany_resource_map();
-
- setup_coherent_ht_domain();
-
-#if CONFIG_LOGICAL_CPUS==1
- /* It is said that we should start core1 after all core0 launched */
- wait_all_core0_started();
- start_other_cores();
-#endif
- wait_all_aps_started(bsp_apicid);
-
- ht_setup_chains_x(sysinfo);
-
- /* run _early_setup before soft-reset. */
- rs780_early_setup();
- sb700_early_setup();
-
-/* Check to see if processor is capable of changing FIDVID */
- /* otherwise it will throw a GP# when reading FIDVID_STATUS */
- cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
- /* Read FIDVID_STATUS */
- msr=rdmsr(0xc0010042);
- printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
- enable_fid_change();
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- init_fidvid_bsp(bsp_apicid);
-
- /* show final fid and vid */
- msr=rdmsr(0xc0010042);
- printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
- } else {
- printk_debug("Changing FIDVID not supported\n");
- }
-
- needs_reset = optimize_link_coherent_ht();
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
- rs780_htinit();
- printk_debug("needs_reset=0x%x\n", needs_reset);
-
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
- allow_all_aps_stop(bsp_apicid);
-
- /* It's the time to set ctrl now; */
- printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n",
- sysinfo->nodes, sysinfo->ctrl, spd_addr);
- fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
- sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
- rs780_before_pci_init();
- sb700_before_pci_init();
-
- post_cache_as_ram();
-}
diff --git a/src/mainboard/amd/mahogany/romstage.c b/src/mainboard/amd/mahogany/romstage.c
index 8aaeb64152..a6d2435e99 100644
--- a/src/mainboard/amd/mahogany/romstage.c
+++ b/src/mainboard/amd/mahogany/romstage.c
@@ -100,60 +100,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* sb700_lpc_port80(); */
- sb700_pci_port80();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
-normal_image:
- post_code(0x23);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx) /* inputs */);
-
-fallback_image:
- post_code(0x25);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -161,6 +111,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* sb700_lpc_port80(); */
+ sb700_pci_port80();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
diff --git a/src/mainboard/amd/pistachio/romstage.c b/src/mainboard/amd/pistachio/romstage.c
index d440f4d2f9..0db2f3413b 100644
--- a/src/mainboard/amd/pistachio/romstage.c
+++ b/src/mainboard/amd/pistachio/romstage.c
@@ -94,60 +94,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- /* Is this a cpu only reset? Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal()) { /* RTC already inited */
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- sb600_lpc_port80();
- /* sb600_pci_port80(); */
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- normal_image:
- post_code(0x01);
- __asm__ volatile ("jmp __normal_image": /* outputs */
- :"a" (bist), "b"(cpu_init_detectedx)); /* inputs */
-
- fallback_image:
- post_code(0x02);
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -157,6 +107,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
(struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE -
CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ sb600_lpc_port80();
+ /* sb600_pci_port80(); */
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}