Various Kconfig and Makefile.inc fixes and cosmetics.

 - Whitespace fixes, remove trailing whitespace, use TABs for identation
   (except in Kconfig "help" lines, which start with one TAB and two spaces
   as per Linux kernel style)

 - Kconfig: Standardize on 'bool' (not 'boolean').

 - s/lar/cbfs/ in one Kconfig help string.

 - Reword various Kconfig menu entries for a more usable and consistent menu.

 - Fix incorrect comment of NO_RUN in devices/Kconfig.

 - superio/serverengines/Kconfig: Incorrect config name.

 - superio/Makefile.inc: s/serverengine/serverengines/.

 - superio/intel/Kconfig: s/SUPERIO_FINTEK_I3100/SUPERIO_INTEL_I3100/.

 - mainboard/via/vt8454c/Kconfig: Fix copy-paste error in help string.

 - mainboard/via/epia-n/Kconfig: Fix "bool" menu text.

 - console/Kconfig: Don't mention defaults in the menu string, kconfig
   already displays them anyway.

 - Kill "Drivers" menu for now, it only confuses users as long as it's emtpy.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 19 insertions, 23 deletions

diff --git a/src/mainboard/amd/serengeti_cheetah/Kconfig b/src/mainboard/amd/serengeti_cheetah/Kconfig
index b148558e46..8bbc4c50d7 100644
--- a/src/mainboard/amd/serengeti_cheetah/Kconfig
+++ b/src/mainboard/amd/serengeti_cheetah/Kconfig
@@ -3,7 +3,7 @@ choice
 	depends on VENDOR_AMD
 
 config BOARD_AMD_SERENGETI_CHEETAH
-	bool "SERENGETI_CHEETAH"
+	bool "Serengeti Cheetah"
 	select ARCH_X86
 	select CPU_AMD_K8
 	select CPU_AMD_SOCKET_F
@@ -15,7 +15,7 @@ config BOARD_AMD_SERENGETI_CHEETAH
 	select PIRQ_TABLE
 	select USE_PRINTK_IN_CAR
 	help
-	AMD Serengeti Series mainboards
+	 AMD Serengeti Cheetah mainboard.
 endchoice
 
 config MAINBOARD_DIR
@@ -27,12 +27,12 @@ config USE_DCACHE_RAM
 	int
 	default 1
 	depends on BOARD_AMD_SERENGETI_CHEETAH
-	
+
 config DCACHE_RAM_BASE
 	hex
 	default 0xc8000
 	depends on BOARD_AMD_SERENGETI_CHEETAH
-	
+
 config DCACHE_RAM_SIZE
 	hex
 	default 0x08000
@@ -70,7 +70,7 @@ config LB_CKS_RANGE_END
 
 config LB_CKS_LOC
 	int
-        default 123
+	default 123
 	depends on BOARD_AMD_SERENGETI_CHEETAH
 
 config MAINBOARD_PART_NUMBER
@@ -80,7 +80,7 @@ config MAINBOARD_PART_NUMBER
 
 config PCI_64BIT_PREF_MEM
 	int
-        default 0
+	default 0
 	depends on BOARD_AMD_SERENGETI_CHEETAH
 
 config USE_DCACHE_RAM
diff --git a/src/mainboard/amd/serengeti_cheetah/Makefile.inc b/src/mainboard/amd/serengeti_cheetah/Makefile.inc
index d5ff7d1efb..320bb7be1e 100644
--- a/src/mainboard/amd/serengeti_cheetah/Makefile.inc
+++ b/src/mainboard/amd/serengeti_cheetah/Makefile.inc
@@ -1,6 +1,6 @@
 ##
 ## This file is part of the coreboot project.
-## 
+##
 ## Copyright (C) 2007-2008 coresystems GmbH
 ##
 ## This program is free software; you can redistribute it and/or
@@ -19,27 +19,23 @@
 ## MA 02110-1301 USA
 ##
 
-##
-## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
-## 
-
-driver-y +=  mainboard.o
+driver-y += mainboard.o
 
-#needed by irq_tables and mptable and acpi_tables
+# Needed by irq_tables and mptable and acpi_tables.
 obj-y += get_bus_conf.o
 obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
 obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) +=  dsdt.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) +=  acpi_tables.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) +=  fadt.o
-
-#./ssdt.o is in northbridge/amd/amdk8/Config.lb
-obj-$(CONFIG_ACPI_SSDTX_NUM) +=  ssdt2.o
-obj-$(CONFIG_ACPI_SSDTX_NUM) +=  ssdt3.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) +=  ssdt4.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o
+
+# ./ssdt.o is in northbridge/amd/amdk8/Config.lb
+obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt2.o
+obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt3.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt4.o
 driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o
 
-# This is part of the conversion to init-obj and away from included code. 
+# This is part of the conversion to init-obj and away from included code.
 
 initobj-y += crt0.o
 # FIXME in $(top)/Makefile
@@ -79,7 +75,7 @@ $(obj)/ssdt3.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci3.asl"
 	iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/
 	perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex
 	mv pci3.hex ssdt3.c
-           
+
 $(obj)/ssdt4.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci4.asl"
 	iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl
 	perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex