AGESA: Drop unused AGESA_MEM_TABLE

These tables are not referenced anywhere, thus all
comments about adjustments are void.

Also drop stub AgesaReadSpd that is all commented out.

Change-Id: I12233ea0dc4baaf36a75f359c52cc59c9b6dad79
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10143
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>

9 files changed, 0 insertions, 511 deletions

diff --git a/src/mainboard/amd/dinar/buildOpts.c b/src/mainboard/amd/dinar/buildOpts.c
index fe74094f1c..d88cd8018f 100644
--- a/src/mainboard/amd/dinar/buildOpts.c
+++ b/src/mainboard/amd/dinar/buildOpts.c
@@ -477,74 +477,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-//HY Customer table
-UINT8 AGESA_MEM_TABLE_HY[][sizeof(MEM_TABLE_ALIAS)] =
-{
-	// Hardcoded Memory Training Values
-
-	// The following macro should be used to override training values for your platform
-	//
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
-	//
-	//   NOTE:
-	//   The following training hardcode values are example values that were taken from a tilapia motherboard
-	//   with a particular DIMM configuration.  To harcode your own values, uncomment the appropriate line in
-	//   the table and replace the byte lane values with your own.
-	//
-	//                                                                               ------------------ BYTE LANES ----------------------
-	//                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
-	// Write Data Timing
-	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
-	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
-	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
-	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
-	// DQS Receiver Enable
-	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
-	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
-	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
-	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
-	// Write DQS Delays
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
-	// Read DQS Delays
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
-	//--------------------------------------------------------------------------------------------------------------------------------------------------
-	// TABLE END
-	NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
-};
-UINT8 SizeOfTableHy = ARRAY_SIZE(AGESA_MEM_TABLE_HY);
-/* ***************************************************************************
- *   Optional User code to be included into the AGESA build
- *    These may be 32-bit call-out routines...
- */
-//AGESA_STATUS
-//AgesaReadSpd (
-//  IN        UINTN                 FcnData,
-//  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
-//  )
-//{
-//  /* platform code to read an SPD...  */
-//  return Status;
-//}
-
-/* ***************************************************************************
- *   Optional User code to be included into the AGESA build
- *    These may be 32-bit call-out routines...
- */
-//AGESA_STATUS
-//AgesaReadSpd (
-//  IN        UINTN                 FcnData,
-//  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
-//  )
-//{
-//  /* platform code to read an SPD...  */
-//  return Status;
-//}
diff --git a/src/mainboard/amd/inagua/buildOpts.c b/src/mainboard/amd/inagua/buildOpts.c
index 2c37c01990..4380c9520b 100644
--- a/src/mainboard/amd/inagua/buildOpts.c
+++ b/src/mainboard/amd/inagua/buildOpts.c
@@ -393,61 +393,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-// DA Customer table
-CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] =
-{
-	// Hardcoded Memory Training Values
-
-	// The following macro should be used to override training values for your platform
-	//
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
-	//
-	//   NOTE:
-	//   The following training hardcode values are example values that were taken from a tilapia motherboard
-	//   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
-	//   the table and replace the byte lane values with your own.
-	//
-	//                                                                               ------------------ BYTE LANES ----------------------
-	//                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
-	// Write Data Timing
-	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
-	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
-	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
-	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
-	// DQS Receiver Enable
-	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
-	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
-	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
-	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
-	// Write DQS Delays
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
-	// Read DQS Delays
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
-	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
-	//--------------------------------------------------------------------------------------------------------------------------------------------------
-	// TABLE END
-	NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
-};
-CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON);
-
-/* ***************************************************************************
- *   Optional User code to be included into the AGESA build
- *    These may be 32-bit call-out routines...
- */
-//AGESA_STATUS
-//AgesaReadSpd (
-//  IN        UINTN                 FcnData,
-//  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
-//  )
-//{
-//  /* platform code to read an SPD...  */
-//  return Status;
-//}
diff --git a/src/mainboard/amd/olivehill/buildOpts.c b/src/mainboard/amd/olivehill/buildOpts.c
index a17869351f..ede69014e7 100644
--- a/src/mainboard/amd/olivehill/buildOpts.c
+++ b/src/mainboard/amd/olivehill/buildOpts.c
@@ -455,47 +455,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-// Customer table
-UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] =
-{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- //   NOTE:
- //   The following training hardcode values are example values that were taken from a tilapia motherboard
- //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
- //   the table and replace the byte lane values with your own.
- //
- //                                                                               ------------------ BYTE LANES ----------------------
- //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
- // Write Data Timing
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- //--------------------------------------------------------------------------------------------------------------------------------------------------
- // TABLE END
-  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
-};
-UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN);
diff --git a/src/mainboard/amd/parmer/buildOpts.c b/src/mainboard/amd/parmer/buildOpts.c
index 57963a5d21..885c8e9fa6 100644
--- a/src/mainboard/amd/parmer/buildOpts.c
+++ b/src/mainboard/amd/parmer/buildOpts.c
@@ -448,47 +448,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-// Customer table
-UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] =
-{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- //   NOTE:
- //   The following training hardcode values are example values that were taken from a tilapia motherboard
- //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
- //   the table and replace the byte lane values with your own.
- //
- //                                                                               ------------------ BYTE LANES ----------------------
- //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
- // Write Data Timing
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- //--------------------------------------------------------------------------------------------------------------------------------------------------
- // TABLE END
-  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
-};
-UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN);
diff --git a/src/mainboard/amd/persimmon/buildOpts.c b/src/mainboard/amd/persimmon/buildOpts.c
index 9cf2a19941..5d1ef4e050 100644
--- a/src/mainboard/amd/persimmon/buildOpts.c
+++ b/src/mainboard/amd/persimmon/buildOpts.c
@@ -393,61 +393,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-//DA Customer table
-CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] =
-{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- //	 NOTE:
- //	 The following training hardcode values are example values that were taken from a tilapia motherboard
- //	 with a particular DIMM configuration.	To hardcode your own values, uncomment the appropriate line in
- //	 the table and replace the byte lane values with your own.
- //
- //	 ------------------ BYTE LANES ----------------------
- //	BL0	 BL1	 BL2	 BL3	 BL4	 BL5	 BL6	 Bl7	 ECC
- // Write Data Timing
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- //--------------------------------------------------------------------------------------------------------------------------------------------------
- // TABLE END
-	NBACCESS (MTEnd, 0,	0, 0, 0, 0),			// End of Table
-};
-CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON);
-
-/* ***************************************************************************
- *	 Optional User code to be included into the AGESA build
- *		These may be 32-bit call-out routines...
- */
-//AGESA_STATUS
-//AgesaReadSpd (
-//	IN				UINTN								 FcnData,
-//	IN OUT		AGESA_READ_SPD_PARAMS *ReadSpd
-//	)
-//{
-//	/* platform code to read an SPD...	*/
-//	return Status;
-//}
diff --git a/src/mainboard/amd/south_station/buildOpts.c b/src/mainboard/amd/south_station/buildOpts.c
index 3f3f5664d1..831274d226 100644
--- a/src/mainboard/amd/south_station/buildOpts.c
+++ b/src/mainboard/amd/south_station/buildOpts.c
@@ -393,61 +393,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-//DA Customer table
-CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] =
-{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- //   NOTE:
- //   The following training hardcode values are example values that were taken from a tilapia motherboard
- //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
- //   the table and replace the byte lane values with your own.
- //
- //                                                                               ------------------ BYTE LANES ----------------------
- //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
- // Write Data Timing
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- //--------------------------------------------------------------------------------------------------------------------------------------------------
- // TABLE END
-  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
-};
-CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON);
-
-/* ***************************************************************************
- *   Optional User code to be included into the AGESA build
- *    These may be 32-bit call-out routines...
- */
-//AGESA_STATUS
-//AgesaReadSpd (
-//  IN        UINTN                 FcnData,
-//  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
-//  )
-//{
-//  /* platform code to read an SPD...  */
-//  return Status;
-//}
diff --git a/src/mainboard/amd/thatcher/buildOpts.c b/src/mainboard/amd/thatcher/buildOpts.c
index c329de3d4c..8c68548e81 100644
--- a/src/mainboard/amd/thatcher/buildOpts.c
+++ b/src/mainboard/amd/thatcher/buildOpts.c
@@ -448,61 +448,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-// Customer table
-UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] =
-{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- //   NOTE:
- //   The following training hardcode values are example values that were taken from a tilapia motherboard
- //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
- //   the table and replace the byte lane values with your own.
- //
- //                                                                               ------------------ BYTE LANES ----------------------
- //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
- // Write Data Timing
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- //--------------------------------------------------------------------------------------------------------------------------------------------------
- // TABLE END
-  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
-};
-UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN);
-
-/* ***************************************************************************
- *   Optional User code to be included into the AGESA build
- *    These may be 32-bit call-out routines...
- */
-//AGESA_STATUS
-//AgesaReadSpd (
-//  IN        UINTN                 FcnData,
-//  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
-//  )
-//{
-//  /* platform code to read an SPD...  */
-//  return Status;
-//}
diff --git a/src/mainboard/amd/torpedo/buildOpts.c b/src/mainboard/amd/torpedo/buildOpts.c
index 2eb20eaf77..ae2f2a28c8 100644
--- a/src/mainboard/amd/torpedo/buildOpts.c
+++ b/src/mainboard/amd/torpedo/buildOpts.c
@@ -319,65 +319,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-//DA Customer table
-UINT8 AGESA_MEM_TABLE_LN[][sizeof (MEM_TABLE_ALIAS)] =
-{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- //   NOTE:
- //   The following training hardcode values are example values that were taken from a tilapia motherboard
- //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
- //   the table and replace the byte lane values with your own.
- //
- //                                                                               ------------------ BYTE LANES ----------------------
- //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
- // Write Data Timing
-  // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x15, 0x14, 0x21, 0x11, 0x40, 0x2A, 0x34, 0x2D, 0x15),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
-  // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x17, 0x16, 0x21, 0x11, 0x3F, 0x2A, 0x35, 0x2E, 0x17),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
-  // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x77, 0x70, 0x77, 0x60, 0x95, 0x83, 0x8F, 0x90, 0x77),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
-  // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x7D, 0x75, 0x7F, 0x6C, 0x9A, 0x8D, 0x94, 0x98, 0x7D),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
-  // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x03, 0x04, 0x0F, 0x00, 0x2D, 0x1B, 0x23, 0x1C, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
-  // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x05, 0x05, 0x0F, 0x00, 0x2E, 0x19, 0x24, 0x1C, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
-  // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x0C, 0x0A, 0x0A, 0x0E, 0x0A, 0x0C, 0x0C, 0x0A, 0x0C),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
-  // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x0A, 0x0C, 0x0E, 0x0A, 0x0C, 0x0A, 0x0C, 0x0E, 0x0A),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- // --------------------------------------------------------------------------------------------------------------------------------------------------
-
- // MaxRdLatency
-  // NBACCESS (MTAfterMaxRdLatTrn, MTNode0, MTDct0, BFMaxLatency, MTOverride, 0x0C),
-  // NBACCESS (MTAfterMaxRdLatTrn, MTNode0, MTDct1, BFMaxLatency, MTOverride, 0x0C),
- // TABLE END
-  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
-};
-UINT8 SizeOfTableLN = ARRAY_SIZE(AGESA_MEM_TABLE_LN);
-
-/* ***************************************************************************
- *   Optional User code to be included into the AGESA build
- *    These may be 32-bit call-out routines...
- */
-//AGESA_STATUS
-//AgesaReadSpd (
-//  IN        UINTN                 FcnData,
-//  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
-//  )
-//{
-//  /* platform code to read an SPD...  */
-//  return Status;
-//}
diff --git a/src/mainboard/amd/union_station/buildOpts.c b/src/mainboard/amd/union_station/buildOpts.c
index 3f3f5664d1..831274d226 100644
--- a/src/mainboard/amd/union_station/buildOpts.c
+++ b/src/mainboard/amd/union_station/buildOpts.c
@@ -393,61 +393,3 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
 #include "mm.h"
 #include "mn.h"
 
-//DA Customer table
-CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] =
-{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- //   NOTE:
- //   The following training hardcode values are example values that were taken from a tilapia motherboard
- //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
- //   the table and replace the byte lane values with your own.
- //
- //                                                                               ------------------ BYTE LANES ----------------------
- //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
- // Write Data Timing
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- //--------------------------------------------------------------------------------------------------------------------------------------------------
- // TABLE END
-  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
-};
-CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON);
-
-/* ***************************************************************************
- *   Optional User code to be included into the AGESA build
- *    These may be 32-bit call-out routines...
- */
-//AGESA_STATUS
-//AgesaReadSpd (
-//  IN        UINTN                 FcnData,
-//  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
-//  )
-//{
-//  /* platform code to read an SPD...  */
-//  return Status;
-//}