This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

7 files changed, 231 insertions, 231 deletions

diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
index 405ebcf4ff..456ad0ecfd 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
@@ -17,8 +17,8 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 #
 
-## XIP_ROM_SIZE must be a power of 2.
-default XIP_ROM_SIZE = 64 * 1024
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
 include /config/failovercalculation.lb
 
 arch i386 end
@@ -33,51 +33,51 @@ driver mainboard.o
 #needed by irq_tables and mptable and acpi_tables
 object get_bus_conf.o
 
-if HAVE_MP_TABLE
+if CONFIG_HAVE_MP_TABLE
 	object mptable.o
 end
 
-if HAVE_PIRQ_TABLE
+if CONFIG_HAVE_PIRQ_TABLE
 	object irq_tables.o
 end
 
-if HAVE_ACPI_TABLES
+if CONFIG_HAVE_ACPI_TABLES
 	 object acpi_tables.o
 	 object fadt.o
 	makerule dsdt.c
-		depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
-		action	"iasl -p $(CURDIR)/dsdt_lb -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
+		depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
+		action	"iasl -p $(CURDIR)/dsdt_lb -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
 		action	"mv dsdt_lb.hex dsdt.c"
 	end
 	 object ./dsdt.o
 
 	#./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
 
-	if ACPI_SSDTX_NUM
+	if CONFIG_ACPI_SSDTX_NUM
 	makerule ssdt2.c
-		depends "$(MAINBOARD)/dx/pci2.asl"
-		action	"iasl -p $(CURDIR)/pci2 -tc $(MAINBOARD)/dx/pci2.asl"
+		depends "$(CONFIG_MAINBOARD)/dx/pci2.asl"
+		action	"iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl"
 		action	"perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
 		action	"mv pci2.hex ssdt2.c"
 	end
 	object ./ssdt2.o
 	makerule ssdt3.c
-		depends "$(MAINBOARD)/dx/pci3.asl"
-		action	"iasl -p $(CURDIR)/pci3 -tc $(MAINBOARD)/dx/pci3.asl"
+		depends "$(CONFIG_MAINBOARD)/dx/pci3.asl"
+		action	"iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/dx/pci3.asl"
 		action	"perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
 		action	"mv pci3.hex ssdt3.c"
 	end
 	object ./ssdt3.o
 	makerule ssdt4.c
-		depends "$(MAINBOARD)/dx/pci4.asl"
-		action	"iasl -p $(CURDIR)/pci4 -tc $(MAINBOARD)/dx/pci4.asl"
+		depends "$(CONFIG_MAINBOARD)/dx/pci4.asl"
+		action	"iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl"
 		action	"perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
 		action	"mv pci4.hex ssdt4.c"
 	end
 	object ./ssdt4.o
 	makerule ssdt5.c
-		depends "$(MAINBOARD)/dx/pci5.asl"
-		action	"iasl -p $(CURDIR)/pci5 -tc $(MAINBOARD)/dx/pci5.asl"
+		depends "$(CONFIG_MAINBOARD)/dx/pci5.asl"
+		action	"iasl -p $(CURDIR)/pci5 -tc $(CONFIG_MAINBOARD)/dx/pci5.asl"
 		action	"perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
 		action	"mv pci5.hex ssdt5.c"
 	end
@@ -88,27 +88,27 @@ end
 	if CONFIG_USE_INIT
 		# compile cache_as_ram.c to auto.o
 		makerule ./cache_as_ram_auto.o
-			depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
 		end
 
 	else
 		#compile cache_as_ram.c to auto.inc
 		makerule ./cache_as_ram_auto.inc
-			depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
-			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
 			action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
 			action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
 		end
 
 	end
 
-if USE_FAILOVER_IMAGE
+if CONFIG_USE_FAILOVER_IMAGE
 else
     if CONFIG_AP_CODE_IN_CAR
 	 makerule ./apc_auto.o
-		 depends "$(MAINBOARD)/apc_auto.c option_table.h"
-		 action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/apc_auto.c -o $@"
+		 depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
+		 action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
 	 end
 	 ldscript /arch/i386/init/ldscript_apc.lb
     end
@@ -118,13 +118,13 @@ end
 ## Build our 16 bit and 32 bit coreboot entry code
 ##
 
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
 	mainboardinit cpu/x86/16bit/entry16.inc
 	ldscript /cpu/x86/16bit/entry16.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
 	mainboardinit cpu/x86/16bit/entry16.inc
 	ldscript /cpu/x86/16bit/entry16.lds
     end
@@ -142,8 +142,8 @@ mainboardinit cpu/x86/32bit/entry32.inc
 ##
 ## Build our reset vector (This is where coreboot is entered)
 ##
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
 	mainboardinit cpu/x86/16bit/reset16.inc
 	ldscript /cpu/x86/16bit/reset16.lds
     else
@@ -151,7 +151,7 @@ if HAVE_FAILOVER_BOOT
 	ldscript /cpu/x86/32bit/reset32.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
 	mainboardinit cpu/x86/16bit/reset16.inc
 	ldscript /cpu/x86/16bit/reset16.lds
     else
@@ -177,12 +177,12 @@ ldscript /arch/i386/lib/id.lds
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
-if HAVE_FAILOVER_BOOT
-    if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+    if CONFIG_USE_FAILOVER_IMAGE
 		ldscript /arch/i386/lib/failover_failover.lds
     end
 else
-    if USE_FALLBACK_IMAGE
+    if CONFIG_USE_FALLBACK_IMAGE
 		ldscript /arch/i386/lib/failover.lds
     end
 end
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
index c62fbe273e..cd5f586ca7 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
@@ -17,126 +17,126 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 #
 
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses HAVE_ACPI_TABLES
-uses HAVE_ACPI_RESUME
-uses ACPI_SSDTX_NUM
-uses USE_FALLBACK_IMAGE
-uses USE_FAILOVER_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_FAILOVER_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_HAVE_ACPI_RESUME
+uses CONFIG_ACPI_SSDTX_NUM
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_USE_FAILOVER_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_FAILOVER_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_MAX_CPUS
 uses CONFIG_MAX_PHYSICAL_CPUS
 uses CONFIG_LOGICAL_CPUS
 uses CONFIG_IOAPIC
 uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses FAILOVER_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_FAILOVER_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD
 uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
 uses COREBOOT_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_RAMBASE
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
 uses CONFIG_CONSOLE_SERIAL8250
-uses HAVE_INIT_TIMER
+uses CONFIG_HAVE_INIT_TIMER
 uses CONFIG_GDB_STUB
 uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
-uses HW_MEM_HOLE_SIZEK
-uses HW_MEM_HOLE_SIZE_AUTO_INC
-
-uses HT_CHAIN_UNITID_BASE
-uses HT_CHAIN_END_UNITID_BASE
-uses SB_HT_CHAIN_ON_BUS0
-uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses USE_DCACHE_RAM
-uses DCACHE_RAM_BASE
-uses DCACHE_RAM_SIZE
-uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_HW_MEM_HOLE_SIZEK
+uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
+
+uses CONFIG_HT_CHAIN_UNITID_BASE
+uses CONFIG_HT_CHAIN_END_UNITID_BASE
+uses CONFIG_SB_HT_CHAIN_ON_BUS0
+uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
+uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
 uses CONFIG_USE_INIT
 
-uses SERIAL_CPU_INIT
+uses CONFIG_SERIAL_CPU_INIT
 
-uses ENABLE_APIC_EXT_ID
-uses APIC_ID_OFFSET
-uses LIFT_BSP_APIC_ID
+uses CONFIG_ENABLE_APIC_EXT_ID
+uses CONFIG_APIC_ID_OFFSET
+uses CONFIG_LIFT_BSP_APIC_ID
 
 uses CONFIG_PCI_64BIT_PREF_MEM
 
 uses CONFIG_LB_MEM_TOPK
 
-uses PCI_BUS_SEGN_BITS
+uses CONFIG_PCI_BUS_SEGN_BITS
 
 uses CONFIG_AP_CODE_IN_CAR
 
-uses MEM_TRAIN_SEQ
+uses CONFIG_MEM_TRAIN_SEQ
 
-uses WAIT_BEFORE_CPUS_INIT
+uses CONFIG_WAIT_BEFORE_CPUS_INIT
 
 uses CONFIG_AMDMCT
 
 uses CONFIG_USE_PRINTK_IN_CAR
-uses CAR_FAM10
-uses AMD_UCODE_PATCH_FILE
+uses CONFIG_CAR_FAM10
+uses CONFIG_AMD_UCODE_PATCH_FILE
 
 ###
 ### Build options
 ###
 
 ##
-## ROM_SIZE is the size of boot ROM that this board will use.
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
 ##
-default ROM_SIZE=1024*1024
+default CONFIG_ROM_SIZE=1024*1024
 
 ##
 ##
 #FALLBACK_SIZE_SIZE is the amount of the ROM the complete fallback image will use
 ##
-#default FALLBACK_SIZE=131072
-#default FALLBACK_SIZE=0x40000
+#default CONFIG_FALLBACK_SIZE=131072
+#default CONFIG_FALLBACK_SIZE=0x40000
 
 #FALLBACK: 1024K - 8K
-default FALLBACK_SIZE=0xFE000
+default CONFIG_FALLBACK_SIZE=0xFE000
 #FAILOVER: 8k
-default FAILOVER_SIZE=0x02000
+default CONFIG_FAILOVER_SIZE=0x02000
 
 #more 1M for pgtbl
 #if there is RAM on node0, we need to set it to 32M, otherwise can not access CAR on node0, and RAM on node1 at same time.
@@ -145,42 +145,42 @@ default CONFIG_LB_MEM_TOPK=16384
 ##
 ## Build code for the fallback boot
 ##
-default HAVE_FALLBACK_BOOT=1
-default HAVE_FAILOVER_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FAILOVER_BOOT=1
 
 ##
 ## Build code to reset the motherboard from coreboot
 ##
-default HAVE_HARD_RESET=1
+default CONFIG_HAVE_HARD_RESET=1
 
 ##
 ## Build code to export a programmable irq routing table
 ##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=11
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=11
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default HAVE_MP_TABLE=1
+default CONFIG_HAVE_MP_TABLE=1
 
 ## ACPI tables will be included
-default HAVE_ACPI_TABLES=1
+default CONFIG_HAVE_ACPI_TABLES=1
 ## extra SSDT num
-default ACPI_SSDTX_NUM=31
+default CONFIG_ACPI_SSDTX_NUM=31
 
 ##
 ## Build code to export a CMOS option table
 ##
-default HAVE_OPTION_TABLE=1
+default CONFIG_HAVE_OPTION_TABLE=1
 
 ##
 ## Move the default coreboot cmos range off of AMD RTC registers
 ##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
 
 ##
 ## Build code for SMP support
@@ -190,58 +190,58 @@ default CONFIG_MAX_PHYSICAL_CPUS=8
 default CONFIG_MAX_CPUS=6 * CONFIG_MAX_PHYSICAL_CPUS
 default CONFIG_LOGICAL_CPUS=1
 
-#default SERIAL_CPU_INIT=0
+#default CONFIG_SERIAL_CPU_INIT=0
 
-default ENABLE_APIC_EXT_ID=1
-default APIC_ID_OFFSET=0x00
-default LIFT_BSP_APIC_ID=1
+default CONFIG_ENABLE_APIC_EXT_ID=1
+default CONFIG_APIC_ID_OFFSET=0x00
+default CONFIG_LIFT_BSP_APIC_ID=1
 
 #memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
 #2G
-#default HW_MEM_HOLE_SIZEK=0x200000
+#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
 #1G
-default HW_MEM_HOLE_SIZEK=0x100000
+default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
 #512M
-#default HW_MEM_HOLE_SIZEK=0x80000
+#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
 
 #make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default HW_MEM_HOLE_SIZE_AUTO_INC=1
+#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
 
 #VGA Console
 default CONFIG_CONSOLE_VGA=1
 default CONFIG_PCI_ROM_RUN=1
 
 #HT Unit ID offset, default is 1, the typical one
-default HT_CHAIN_UNITID_BASE=0xa
+default CONFIG_HT_CHAIN_UNITID_BASE=0xa
 
 #real SB Unit ID, default is 0x20, mean dont touch it at last
-default HT_CHAIN_END_UNITID_BASE=0x6
+default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
 
 #make the SB HT chain on bus 0, default is not (0)
-default SB_HT_CHAIN_ON_BUS0=2
+default CONFIG_SB_HT_CHAIN_ON_BUS0=2
 
 #only offset for SB chain?, default is yes(1)
-#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
 
 #allow capable device use that above 4G
 #default CONFIG_PCI_64BIT_PREF_MEM=1
 
 #it only be 0, 1, 2, 3, 4 and default is 0
-#default PCI_BUS_SEGN_BITS=3
+#default CONFIG_PCI_BUS_SEGN_BITS=3
 
 ##
 ## enable CACHE_AS_RAM specifics
 ##
-default USE_DCACHE_RAM=1
-default DCACHE_RAM_BASE=0xc4000
-default DCACHE_RAM_SIZE=0x0c000
-#default DCACHE_RAM_GLOBAL_VAR_SIZE=0x08000
-default DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_BASE=0xc4000
+default CONFIG_DCACHE_RAM_SIZE=0x0c000
+#default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x08000
+default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
 default CONFIG_USE_INIT=0
 
 #default CONFIG_AP_CODE_IN_CAR=1
-default MEM_TRAIN_SEQ=2
-default WAIT_BEFORE_CPUS_INIT=0
+default CONFIG_MEM_TRAIN_SEQ=2
+default CONFIG_WAIT_BEFORE_CPUS_INIT=0
 
 default CONFIG_AMDMCT = 1
 
@@ -253,10 +253,10 @@ default CONFIG_IOAPIC=1
 ##
 ## Clean up the motherboard id strings
 ##
-default MAINBOARD_PART_NUMBER="Cheetah Fam10"
-default MAINBOARD_VENDOR="AMD"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
+default CONFIG_MAINBOARD_PART_NUMBER="Cheetah Fam10"
+default CONFIG_MAINBOARD_VENDOR="AMD"
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
 
 ##
 ## Set microcode patch file name
@@ -266,34 +266,34 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
 ##	Barcelona rev DR-B2, B3: "mc_patch_01000095.h"
 ##	Shanghai rev DA-C2: "mc_patch_0100009f.h"
 ##
-default AMD_UCODE_PATCH_FILE="mc_patch_01000095.h"
+default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000095.h"
 
 ###
 ### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
 
 ##
 ## Use a small 8K stack
 ##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
 
 ##
 ## Use a small 768k heap
 ##
-default HEAP_SIZE=0xc0000
+default CONFIG_HEAP_SIZE=0xc0000
 
 ##
 ## Only use the option table in a normal image
 ##
-default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
+default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
 
 ##
 ## Coreboot C code runs at this location in RAM
 ##
-default _RAMBASE=0x00200000
+default CONFIG_RAMBASE=0x00200000
 
 ##
 ## Load the payload from the ROM
@@ -307,8 +307,8 @@ default CONFIG_ROM_PAYLOAD = 1
 ##
 ## The default compiler
 ##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
 
 ##
 ## Disable the gdb stub by default
@@ -325,21 +325,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1
 default CONFIG_CONSOLE_SERIAL8250=1
 
 ## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
 
 # Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
 
 # Select the serial protocol
 # This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
 
 ##
 ### Select the coreboot loglevel
@@ -351,17 +351,17 @@ default TTYS0_LCS=0x3
 ## WARNING    5   warning conditions
 ## NOTICE     6   normal but significant condition
 ## INFO       7   informational
-## DEBUG      8   debug-level messages
+## CONFIG_DEBUG      8   debug-level messages
 ## SPEW       9   Way too many details
 
 ## Request this level of debugging output
-default  DEFAULT_CONSOLE_LOGLEVEL=8
+default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-default  MAXIMUM_CONSOLE_LOGLEVEL=8
+default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 ##
 ## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
 #
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c b/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c
index ed53938a63..8239a115bf 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c
@@ -49,7 +49,7 @@ static void dump_mem(u32 start, u32 end)
 extern u8 AmlCode[];
 extern u8 AmlCode_ssdt[];
 
-#if ACPI_SSDTX_NUM >= 1
+#if CONFIG_ACPI_SSDTX_NUM >= 1
 extern u8 AmlCode_ssdt2[];
 extern u8 AmlCode_ssdt3[];
 extern u8 AmlCode_ssdt4[];
@@ -276,7 +276,7 @@ unsigned long write_acpi_tables(unsigned long start)
 	printk_debug("ACPI:    * SSDT for PState at %lx\n", current);
 	current = acpi_add_ssdt_pstates(rsdt, current);
 
-#if ACPI_SSDTX_NUM >= 1
+#if CONFIG_ACPI_SSDTX_NUM >= 1
 
 	/* same htio, but different possition? We may have to copy,
 	change HCIN, and recalculate the checknum and add_table */
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/apc_auto.c b/src/mainboard/amd/serengeti_cheetah_fam10/apc_auto.c
index 49dadd799a..fbb8c14388 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/apc_auto.c
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/apc_auto.c
@@ -50,9 +50,9 @@
 #include "lib/delay.c"
 
 #if NODE_NUMS == 64
-	 #define NODE_PCI(x,fn) ((x<32)?PCI_DEV(CBB,CDB+x,fn):PCI_DEV(CBB-1, CDB+x-32, fn))
+	 #define NODE_PCI(x,fn) ((x<32)?PCI_DEV(CONFIG_CBB,CONFIG_CDB+x,fn):PCI_DEV(CONFIG_CBB-1, CONFIG_CDB+x-32, fn))
 #else
-	 #define NODE_PCI(x, fn) PCI_DEV(CBB,CDB+x,fn)
+	 #define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,CONFIG_CDB+x,fn)
 #endif
 
 //#include "cpu/x86/lapic/boot_cpu.c"
@@ -73,8 +73,8 @@
 
 void hardwaremain(int ret_addr)
 {
-	struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
-	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+	struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
+	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
 
 	struct node_core_id id;
 
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c b/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c
index 38196b262e..4e484553f7 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c
@@ -60,7 +60,7 @@ static void post_code(u8 value) {
 	outb(value, 0x80);
 }
 
-#if (USE_FAILOVER_IMAGE == 0)
+#if (CONFIG_USE_FAILOVER_IMAGE == 0)
 #include "arch/i386/lib/console.c"
 #include "pc80/serial.c"
 #include "ram/ramtest.c"
@@ -80,7 +80,7 @@ int do_printk(int msg_level, const char *fmt, ...) __attribute__((format(printf,
 #include "cpu/x86/bist.h"
 
 
-#if (USE_FAILOVER_IMAGE == 0)
+#if (CONFIG_USE_FAILOVER_IMAGE == 0)
 
 #include "northbridge/amd/amdfam10/debug.c"
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
@@ -142,10 +142,10 @@ static int spd_read_byte(u32 device, u32 address)
 #include "cpu/amd/model_10xxx/init_cpus.c"
 #include "cpu/amd/model_10xxx/fidvid.c"
 
-#endif /* (USE_FAILOVER_IMAGE == 0) */
+#endif /* (CONFIG_USE_FAILOVER_IMAGE == 0) */
 
 
-#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
+#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdfam10/early_ht.c"
 
@@ -190,7 +190,7 @@ normal_image:
 		);
 
 fallback_image:
- #if HAVE_FAILOVER_BOOT==1
+ #if CONFIG_HAVE_FAILOVER_BOOT==1
 	__asm__ volatile ("jmp __fallback_image"
 		 : /* outputs */
 		 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
@@ -198,22 +198,22 @@ fallback_image:
  #endif
 	;
 }
-#endif /* ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) */
+#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) */
 
 
 void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a USE_FAILOVER_IMAGE=0.
-#if HAVE_FAILOVER_BOOT==1
- #if USE_FAILOVER_IMAGE==1
+//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a CONFIG_USE_FAILOVER_IMAGE=0.
+#if CONFIG_HAVE_FAILOVER_BOOT==1
+ #if CONFIG_USE_FAILOVER_IMAGE==1
 	failover_process(bist, cpu_init_detectedx);
  #else
 	real_main(bist, cpu_init_detectedx);
  #endif
 #else
- #if USE_FALLBACK_IMAGE == 1
+ #if CONFIG_USE_FALLBACK_IMAGE == 1
 	failover_process(bist, cpu_init_detectedx);
  #endif
 	real_main(bist, cpu_init_detectedx);
@@ -221,7 +221,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 }
 
 
-#if (USE_FAILOVER_IMAGE==0)
+#if (CONFIG_USE_FAILOVER_IMAGE==0)
 #include "spd_addr.h"
 #include "cpu/amd/microcode/microcode.c"
 #include "cpu/amd/model_10xxx/update_microcode.c"
@@ -229,7 +229,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
 
-	struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 	u32 bsp_apicid = 0;
 	u32 val;
 	msr_t msr;
@@ -243,12 +243,12 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	post_code(0x32);
 
-	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();
 	printk_debug("\n");
 
-//	dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE);
+//	dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
 
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);
@@ -380,4 +380,4 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 }
 
 
-#endif /* USE_FAILOVER_IMAGE==0 */
+#endif /* CONFIG_USE_FAILOVER_IMAGE==0 */
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c b/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c
index d1d1ff8e32..de8eacde6b 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c
@@ -116,11 +116,11 @@ unsigned long write_pirq_routing_table(unsigned long addr)
 
 	}
 
-#if CBB
-	write_pirq_info(pirq_info, CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+#if CONFIG_CBB
+	write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
 	pirq_info++; slot_num++;
 	if(sysconf.nodes>32) {
-		write_pirq_info(pirq_info, CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+		write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
 		pirq_info++; slot_num++;
 	}
 #endif
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c b/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c
index 04698d7369..25093fd8b1 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c
@@ -49,14 +49,14 @@ static void setup_mb_resource_map(void)
 		 *	   This field defines the upper address bits of a 40 bit  address
 		 *	   that define the end of the DRAM region.
 		 */
-//		PCI_ADDR(CBB, CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR_FAM10
-		PCI_ADDR(CBB, CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
-		PCI_ADDR(CBB, CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
-		PCI_ADDR(CBB, CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
-		PCI_ADDR(CBB, CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
-		PCI_ADDR(CBB, CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
-		PCI_ADDR(CBB, CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
-		PCI_ADDR(CBB, CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
 		/* DRAM Base i Registers
 		 * F1:0x40 i = 0
 		 * F1:0x48 i = 1
@@ -87,14 +87,14 @@ static void setup_mb_resource_map(void)
 		 *	   This field defines the upper address bits of a 40-bit address
 		 *	   that define the start of the DRAM region.
 		 */
-//		PCI_ADDR(CBB, CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CAR_FAM10
-		PCI_ADDR(CBB, CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
 
 		/* Memory-Mapped I/O Limit i Registers
 		 * F1:0x84 i = 0
@@ -128,14 +128,14 @@ static void setup_mb_resource_map(void)
 		 *	   This field defines the upp adddress bits of a 40-bit address that
 		 *	   defines the end of a memory-mapped I/O region n
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0x84), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x8C), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x94), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x9C), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xA4), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xAC), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xB4), 0x00000048, 0x00000000,
-//		PCI_ADDR(CBB, CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
 
 		/* Memory-Mapped I/O Base i Registers
 		 * F1:0x80 i = 0
@@ -163,14 +163,14 @@ static void setup_mb_resource_map(void)
 		 *	   This field defines the upper address bits of a 40bit address
 		 *	   that defines the start of memory-mapped I/O region i
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0x80), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x88), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x90), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x98), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xA0), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xA8), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xB0), 0x000000f0, 0x00000000,
-//		PCI_ADDR(CBB, CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
 
 		/* PCI I/O Limit i Registers
 		 * F1:0xC4 i = 0
@@ -197,10 +197,10 @@ static void setup_mb_resource_map(void)
 		 *	   This field defines the end of PCI I/O region n
 		 * [31:25] Reserved
 		 */
-//		PCI_ADDR(CBB, CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
-		PCI_ADDR(CBB, CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
 
 		/* PCI I/O Base i Registers
 		 * F1:0xC0 i = 0
@@ -227,10 +227,10 @@ static void setup_mb_resource_map(void)
 		 *	   This field defines the start of PCI I/O region n
 		 * [31:25] Reserved
 		 */
-//		PCI_ADDR(CBB, CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
-		PCI_ADDR(CBB, CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
 
 		/* Config Base and Limit i Registers
 		 * F1:0xE0 i = 0
@@ -268,10 +268,10 @@ static void setup_mb_resource_map(void)
 		 * [31:24] Bus Number Limit i
 		 *	   This field defines the highest bus number in configuration regin i
 		 */
-//		PCI_ADDR(CBB, CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0
-		PCI_ADDR(CBB, CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
 	};
 
 	int max;