This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 80 insertions, 80 deletions

diff --git a/src/mainboard/amd/rumba/Config.lb b/src/mainboard/amd/rumba/Config.lb
index 426b7a62c7..466703fcc3 100644
--- a/src/mainboard/amd/rumba/Config.lb
+++ b/src/mainboard/amd/rumba/Config.lb
@@ -1,5 +1,5 @@
-## XIP_ROM_SIZE must be a power of 2.
-default XIP_ROM_SIZE = 64 * 1024
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
 include /config/nofailovercalculation.lb
 
 ##
@@ -14,29 +14,29 @@ arch i386 end
 
 driver mainboard.o
 
-if HAVE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end
 #object reset.o
 
 ##
 ## Romcc output
 ##
 makerule ./failover.E
-	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" 
+	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
 end
 
 makerule ./failover.inc
-	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
+	action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
 end
 
 makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+	depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" 
+	action	"../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
 end
 makerule ./auto.inc 
-	depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+	depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
+	action	"../romcc    -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
 end
 
 ##
@@ -50,7 +50,7 @@ ldscript /cpu/x86/32bit/entry32.lds
 ##
 ## Build our reset vector (This is where coreboot is entered)
 ##
-if USE_FALLBACK_IMAGE 
+if CONFIG_USE_FALLBACK_IMAGE 
 	mainboardinit cpu/x86/16bit/reset16.inc 
 	ldscript /cpu/x86/16bit/reset16.lds 
 else
@@ -72,7 +72,7 @@ ldscript /arch/i386/lib/id.lds
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
 	ldscript /arch/i386/lib/failover.lds 
 	mainboardinit ./failover.inc
 end
diff --git a/src/mainboard/amd/rumba/Options.lb b/src/mainboard/amd/rumba/Options.lb
index 70c05bfa56..eff01c1087 100644
--- a/src/mainboard/amd/rumba/Options.lb
+++ b/src/mainboard/amd/rumba/Options.lb
@@ -1,50 +1,50 @@
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
 uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses HAVE_OPTION_TABLE
-uses USE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_HAVE_OPTION_TABLE
+uses CONFIG_USE_OPTION_TABLE
 uses CONFIG_ROM_PAYLOAD
-uses IRQ_SLOT_COUNT
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PART_NUMBER
 uses COREBOOT_EXTRA_VERSION
-uses ARCH
-uses FALLBACK_SIZE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_ARCH
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
 uses CONFIG_ROM_PAYLOAD_START
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses _RAMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses HAVE_MP_TABLE
-uses CROSS_COMPILE
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_RAMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_HAVE_MP_TABLE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
 uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
 uses CONFIG_UDELAY_TSC
 uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
 
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE  = 256*1024
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
+default CONFIG_ROM_SIZE  = 256*1024
 
 ###
 ### Build options
@@ -53,17 +53,17 @@ default ROM_SIZE  = 256*1024
 ##
 ## Build code for the fallback boot
 ##
-default HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
 
 ##
 ## no MP table
 ##
-default HAVE_MP_TABLE=0
+default CONFIG_HAVE_MP_TABLE=0
 
 ##
 ## Build code to reset the motherboard from coreboot
 ##
-default HAVE_HARD_RESET=0
+default CONFIG_HAVE_HARD_RESET=0
 
 ## Delay timer options
 ##
@@ -73,49 +73,49 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
 ##
 ## Build code to export a programmable irq routing table
 ##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=2
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=2
 #object irq_tables.o
 
 ##
 ## Build code to export a CMOS option table
 ##
-default HAVE_OPTION_TABLE=0
+default CONFIG_HAVE_OPTION_TABLE=0
 
 ###
 ### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
-default FALLBACK_SIZE = 131072
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
+default CONFIG_FALLBACK_SIZE = 131072
 
 ##
 ## Use a small 8K stack
 ##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
 
 ##
 ## Use a small 16K heap
 ##
-default HEAP_SIZE=0x4000
+default CONFIG_HEAP_SIZE=0x4000
 
 ##
 ## Only use the option table in a normal image
 ##
-#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-default USE_OPTION_TABLE = 0
+#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
+default CONFIG_USE_OPTION_TABLE = 0
 
-default _RAMBASE = 0x00004000
+default CONFIG_RAMBASE = 0x00004000
 
 default CONFIG_ROM_PAYLOAD     = 1
 
 ##
 ## The default compiler
 ##
-default CROSS_COMPILE=""
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CONFIG_CROSS_COMPILE=""
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
 
 ##
 ## The Serial Console
@@ -125,21 +125,21 @@ default HOSTCC="gcc"
 default CONFIG_CONSOLE_SERIAL8250=1
 
 ## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
 
 # Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
 
 # Select the serial protocol
 # This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
 
 ##
 ### Select the coreboot loglevel
@@ -151,13 +151,13 @@ default TTYS0_LCS=0x3
 ## WARNING    5   warning conditions               
 ## NOTICE     6   normal but significant condition 
 ## INFO       7   informational                    
-## DEBUG      8   debug-level messages             
+## CONFIG_DEBUG      8   debug-level messages             
 ## SPEW       9   Way too many details             
 
 ## Request this level of debugging output
-default  DEFAULT_CONSOLE_LOGLEVEL=8
+default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-default  MAXIMUM_CONSOLE_LOGLEVEL=8
+default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 
 #
diff --git a/src/mainboard/amd/rumba/auto.c b/src/mainboard/amd/rumba/auto.c
index b3a9b839ee..e1326ff622 100644
--- a/src/mainboard/amd/rumba/auto.c
+++ b/src/mainboard/amd/rumba/auto.c
@@ -127,7 +127,7 @@ static void main(unsigned long bist)
 	SystemPreInit();
 	
 
-	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
 	console_init();