diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-24 00:04:22 +0300 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-31 03:41:11 +0000 |
commit | 1740230ace3aeede3a7ee5cadd1e17744cda07b3 (patch) | |
tree | bf4e9f45d71fef44056ba901ac91fcbfb423a525 /src/mainboard/amd/pistachio/mainboard.c | |
parent | f054a4bf3d6ce459d15c9375e4ca2390d04ffb68 (diff) |
Remove all AMD K8 boards
Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.
Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/amd/pistachio/mainboard.c')
-rw-r--r-- | src/mainboard/amd/pistachio/mainboard.c | 259 |
1 files changed, 0 insertions, 259 deletions
diff --git a/src/mainboard/amd/pistachio/mainboard.c b/src/mainboard/amd/pistachio/mainboard.c deleted file mode 100644 index 77fbcc1e17..0000000000 --- a/src/mainboard/amd/pistachio/mainboard.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> - -#define ADT7475_ADDRESS 0x2E -#define SMBUS_IO_BASE 0x1000 - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, - u8 val); -#define ADT7475_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7475_ADDRESS, address) -#define ADT7475_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7475_ADDRESS, address, val) - - -/******************************************************** -* pistachio uses a BCM5787 as on-board NIC. -* It has a pin named LOW_POWER to enable it into LOW POWER state. -* In order to run NIC, we should let it out of Low power state. This pin is -* controlled by GPM8. -* RRG4.2.3 GPM as GPIO -* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers: -* I/O C50, C51, C52, PM I/O94, 95, 96. -* RRG4.2.3.1 GPM pins as Input -* RRG4.2.3.2 GPM pins as Output -* The R77 (on BRASS) / R81 (on Bronze) is not load! -* So NIC can work whether this function runs. -********************************************************/ -static void enable_onboard_nic(void) -{ - u8 byte; - - printk(BIOS_INFO, "%s.\n", __func__); - - /* enable GPM8 output */ - byte = pm_ioread(0x95); - byte &= 0xfe; - pm_iowrite(0x95, byte); - - /* GPM8 outputs low. */ - byte = pm_ioread(0x94); - byte &= 0xfe; - pm_iowrite(0x94, byte); -} - -/* - * set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte, byte2; - u16 word; - u32 dword; - struct device *sm_dev; - - /* set adt7475 */ - ADT7475_write_byte(0x40, 0x04); - /* Config Register 6 */ - ADT7475_write_byte(0x10, 0x00); - /* Config Register 7 */ - ADT7475_write_byte(0x11, 0x00); - - /* set Offset 64 format, enable THERM on Remote 1& Remote 2 */ - ADT7475_write_byte(0x7c, 0xa0); - /* No offset for remote 2 */ - ADT7475_write_byte(0x72, 0x00); - /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */ - ADT7475_write_byte(0x5c, 0x02); - /* PWM 3 configuration register Case fan controlled by 690 temp */ - ADT7475_write_byte(0x5e, 0x42); - - /* remote 1 low temp limit */ - ADT7475_write_byte(0x4e, 0x00); - /* remote 1 High temp limit (90C) */ - ADT7475_write_byte(0x4f, 0x9a); - - /* remote2 Low Temp Limit */ - ADT7475_write_byte(0x52, 0x00); - /* remote2 High Limit (90C) */ - ADT7475_write_byte(0x53, 0x9a); - - /* remote 1 therm temp limit (95C) */ - ADT7475_write_byte(0x6a, 0x9f); - /* remote 2 therm temp limit (95C) */ - ADT7475_write_byte(0x6c, 0x9f); - - /* PWM 1 minimum duty cycle (37%) */ - ADT7475_write_byte(0x64, 0x60); - /* PWM 1 Maximum duty cycle (100%) */ - ADT7475_write_byte(0x38, 0xff); - /* PWM 3 minimum duty cycle (37%) */ - ADT7475_write_byte(0x66, 0x60); - /* PWM 3 Maximum Duty Cycle (100%) */ - ADT7475_write_byte(0x3a, 0xff); - - /* Remote 1 temperature Tmin (32C) */ - ADT7475_write_byte(0x67, 0x60); - /* Remote 2 temperature Tmin (32C) */ - ADT7475_write_byte(0x69, 0x60); - /* remote 1 Trange (53C ramp range) */ - ADT7475_write_byte(0x5f, 0xe8); - /* remote 2 Trange (53C ramp range) */ - ADT7475_write_byte(0x61, 0xe8); - - /* PWM2 Duty cycle */ - ADT7475_write_byte(0x65, 0x00); - /* PWM2 Disabled */ - ADT7475_write_byte(0x5d, 0x80); - /* PWM2 Max Duty Cycle */ - ADT7475_write_byte(0x39, 0x00); - - /* Config Register 3 - enable smbalert & therm */ - ADT7475_write_byte(0x78, 0x03); - /* Config Register 4 - enable therm output */ - ADT7475_write_byte(0x7d, 0x09); - /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 2 fault, SmbAlert Fan for Therm Timer event */ - ADT7475_write_byte(0x75, 0x2a); - /* Config Register 1 Set Start bit */ - ADT7475_write_byte(0x40, 0x05); - /* Read status register to clear any old errors */ - byte2 = ADT7475_read_byte(0x42); - byte = ADT7475_read_byte(0x41); - - /* remote 1 temperature offset */ - ADT7475_write_byte(0x70, 0x00); - - printk(BIOS_INFO, "Init adt7475 end , status 0x42 %02x, status 0x41 %02x\n", - byte2, byte); - - /* sb600 setting for thermal config. Set SB600 GPM5 to trigger ACPI event */ - /* set GPM5 as GPM5, not DDR3_memory disable */ - byte = pm_ioread(0x8f); - byte |= 1 << 6; /* enable GPE */ - pm_iowrite(0x8f, byte); - - /* GPM5 as GPIO not USB OC */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - dword = pci_read_config32(sm_dev, 0x64); - dword |= 1 << 19; - pci_write_config32(sm_dev, 0x64, dword); - - /* Enable Client Management Index/Data registers */ - dword = pci_read_config32(sm_dev, 0x78); - dword |= 1 << 11; /* Cms_enable */ - pci_write_config32(sm_dev, 0x78, dword); - - /* MiscfuncEnable */ - byte = pci_read_config8(sm_dev, 0x41); - byte |= (1 << 5); - pci_write_config8(sm_dev, 0x41, byte); - - /* set GPM5 as input */ - /* set index register 0C50h to 13h (miscellaneous control) */ - outb(0x13, 0xC50); /* CMIndex */ - /* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */ - byte = inb(0xC51); /* CMData */ - byte &= 0x3f; - byte |= 1 << 6; - outb(byte, 0xC51); - /* set GPM port 0C52h bit 5 to 1 to tri-state the GPM port */ - byte = inb(0xc52); /* GpmPort */ - byte |= 1 << 5; - outb(byte, 0xc52); - /* set CM data register 0C51h bits [7:6] to 00b to set GPM port for read */ - byte = inb(0xc51); - byte &= 0x3f; - outb(byte, 0xc51); - - /* trigger SCI/SMI */ - byte = pm_ioread(0x34); - byte &= 0xcf; - pm_iowrite(0x34, byte); - - /* set GPM5 to not wake from s5 */ - byte = pm_ioread(0x77); - byte &= ~(1 << 5); - pm_iowrite(0x77, byte); - - /* trigger on falling edge */ - byte = pm_ioread(0x38); - byte &= ~(1 << 2); - pm_iowrite(0x38, byte); - - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in pistachio board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard Pistachio Enable. dev=0x%p\n", dev); - - enable_onboard_nic(); - set_thermal_config(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; |