mb/*/*: Remove AMD FAMILY15TN boards

These boards use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.

Change-Id: I9efb5cb1149cc4cf6337c47af8a2f4c4b55f4368
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

1 files changed, 0 insertions, 168 deletions

diff --git a/src/mainboard/amd/parmer/BiosCallOuts.c b/src/mainboard/amd/parmer/BiosCallOuts.c
deleted file mode 100644
index b553203abe..0000000000
--- a/src/mainboard/amd/parmer/BiosCallOuts.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <AGESA.h>
-#include <northbridge/amd/agesa/BiosCallOuts.h>
-#include <northbridge/amd/agesa/state_machine.h>
-#include <FchPlatform.h>
-
-#include "imc.h"
-
-const BIOS_CALLOUT_STRUCT BiosCallouts[] =
-{
-	{AGESA_DO_RESET,                 agesa_Reset },
-	{AGESA_READ_SPD,                 agesa_ReadSpd },
-	{AGESA_READ_SPD_RECOVERY,        agesa_NoopUnsupported },
-	{AGESA_RUNFUNC_ONAP,             agesa_RunFuncOnAp },
-	{AGESA_GET_IDS_INIT_DATA,        agesa_EmptyIdsInitData },
-	{AGESA_HOOKBEFORE_DQS_TRAINING,  agesa_NoopSuccess },
-	{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
-	{AGESA_GNB_GFX_GET_VBIOS_IMAGE,  agesa_GfxGetVbiosImage }
-};
-const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
-
-/**
- * AMD Parmer Platform ALC272 Verb Table
- */
-static const CODEC_ENTRY Parmer_Alc272_VerbTbl[] = {
-	{0x11, 0x411111F0},
-	{0x12, 0x411111F0},
-	{0x13, 0x411111F0},
-	{0x14, 0x411111F0},
-	{0x15, 0x411111F0},
-	{0x16, 0x411111F0},
-	{0x17, 0x411111F0},
-	{0x18, 0x01a19840},
-	{0x19, 0x411111F0},
-	{0x1a, 0x01813030},
-	{0x1b, 0x411111F0},
-	{0x1d, 0x40130605},
-	{0x1e, 0x01441120},
-	{0x21, 0x01211010},
-	{0xff, 0xffffffff}
-};
-
-static const CODEC_TBL_LIST CodecTableList[] =
-{
-	{0x10ec0272, (CODEC_ENTRY*)&Parmer_Alc272_VerbTbl[0]},
-	{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
-};
-
-#define FAN_INPUT_INTERNAL_DIODE	0
-#define FAN_INPUT_TEMP0			1
-#define FAN_INPUT_TEMP1			2
-#define FAN_INPUT_TEMP2			3
-#define FAN_INPUT_TEMP3			4
-#define FAN_INPUT_TEMP0_FILTER		5
-#define FAN_INPUT_ZERO			6
-#define FAN_INPUT_DISABLED		7
-
-#define FAN_AUTOMODE			(1 << 0)
-#define FAN_LINEARMODE			(1 << 1)
-#define FAN_STEPMODE			~(1 << 1)
-#define FAN_POLARITY_HIGH		(1 << 2)
-#define FAN_POLARITY_LOW		~(1 << 2)
-
-/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
-#define FREQ_28KHZ			0x0
-#define FREQ_25KHZ			0x1
-#define FREQ_23KHZ			0x2
-#define FREQ_21KHZ			0x3
-#define FREQ_29KHZ			0x4
-#define FREQ_18KHZ			0x5
-#define FREQ_100HZ			0xF7
-#define FREQ_87HZ			0xF8
-#define FREQ_58HZ			0xF9
-#define FREQ_44HZ			0xFA
-#define FREQ_35HZ			0xFB
-#define FREQ_29HZ			0xFC
-#define FREQ_22HZ			0xFD
-#define FREQ_14HZ			0xFE
-#define FREQ_11HZ			0xFF
-
-/* Parmer Hardware Monitor Fan Control
- * Hardware limitation:
- *  HWM failed to read the input temperature via I2C,
- *  if other software switches the I2C switch by mistake or intention.
- *  We recommend using IMC to control Fans, instead of HWM.
- */
-static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
-{
-	/* Enable IMC fan control, the recommended way */
-	if (CONFIG(HUDSON_IMC_FWM)) {
-		imc_reg_init();
-
-		/* HwMonitorEnable = TRUE &&  HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
-		FchParams->Hwm.HwMonitorEnable = TRUE;
-		FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
-
-		FchParams->Imc.ImcEnable = TRUE;
-		FchParams->Hwm.HwmControl = 1;	/* 1 IMC, 0 HWM */
-		FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */
-
-		LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
-
-		/* Thermal Zone Parameter */
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01;	/* PWM stepping rate in unit of PWM level percentage */
-		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
-
-		/* IMC Fan Policy temperature thresholds */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80;	/*AC0 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c;	/*AC1 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32;	/*AC2 threshold in Celsius */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff;	/*AC3 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff;	/*AC4 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff;	/*AC5 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff;	/*AC6 threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b;	/*critical threshold* in Celsius, 0xFF is not define */
-		FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
-
-		/* IMC Fan Policy PWM Settings */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00;	/* Zone */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a;	/* AL0 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46;	/* AL1 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28;	/* AL2 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff;	/* AL3 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff;	/* AL4 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff;	/* AL5 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff;	/* AL6 percentage */
-		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff;	/* AL7 percentage */
-
-		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
-
-		/* NOTE:
-		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
-		 * AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
-		 * So we remove it from AGESA code. Please See FchInitLateHwm.
-		 */
-	} else {
-		/* HWM fan control, the way not recommended */
-		FchParams->Imc.ImcEnable = FALSE;
-		FchParams->Hwm.HwMonitorEnable = TRUE;
-		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-	}
-}
-
-void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
-{
-	FchParams_reset->LegacyFree = CONFIG(HUDSON_LEGACY_FREE);
-}
-
-void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env)
-{
-	/* Azalia Controller OEM Codec Table Pointer */
-	FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
-
-	oem_fan_control(FchParams_env);
-}