binarypi mainboards: Clean up IS_ENABLED fan control

Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around
the imc.h includes.  Convert from #if to if() for all fan control
setup code.  Where necessary, make functions non-static to match the
prototypes in imc.h.

Change-Id: If88af42d00227285931829441909a982fc292b2b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

1 files changed, 123 insertions, 127 deletions

diff --git a/src/mainboard/amd/lamar/BiosCallOuts.c b/src/mainboard/amd/lamar/BiosCallOuts.c
index 3a014b019a..b0cdcc0dad 100644
--- a/src/mainboard/amd/lamar/BiosCallOuts.c
+++ b/src/mainboard/amd/lamar/BiosCallOuts.c
@@ -20,9 +20,7 @@
 #include "heapManager.h"
 #include "FchPlatform.h"
 #include "cbfs.h"
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
 #include "imc.h"
-#endif
 #include "hudson.h"
 #include <stdlib.h>
 #include <device/azalia.h>
@@ -140,7 +138,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
  *  software switches the I2C address.  AMD recommends using IMC
  *  to control fans, instead of HWM.
  */
-static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
 	FCH_HWM_FAN_CTR oem_factl[5] = {
 		/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
@@ -155,130 +153,128 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 	LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
 
 	/* Enable IMC fan control. the recommended way */
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
-
-	imc_reg_init();
-
-	/* HwMonitorEnable = TRUE &&  HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
-	FchParams->Hwm.HwMonitorEnable = TRUE;
-	FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;       /* 0 disable, 1 enable TSI Auto Polling */
-
-	FchParams->Imc.ImcEnable = TRUE;
-	FchParams->Hwm.HwmControl = 1;	/* 1 IMC, 0 HWM */
-	FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
-
-	LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
-
-	/* Thermal Zone Parameter */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00;    /* Zone */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d;    /* BIT0 | BIT2 | BIT5 */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;    /* 6 | BIT3 */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98;    /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01;    /* PWM steping rate in unit of PWM level percentage */
-	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
-
-	/* IMC Fan Policy temperature thresholds */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00;    /* Zone */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;    /* AC0 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c;    /* AC1 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32;    /* AC2 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff;    /* AC3 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff;    /* AC4 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff;    /* AC5 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff;    /* AC6 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff;    /* AC7 lowest threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b;    /* critical threshold* in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
-
-	/* IMC Fan Policy PWM Settings */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00;    /* Zone */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a;    /* AL0 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46;    /* AL1 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28;    /* AL2 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff;    /* AL3 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff;    /* AL4 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff;    /* AL5 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff;    /* AL6 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff;    /* AL7 percentage */
-
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01;    /* Zone */
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;    /* BIT0 | BIT2 | BIT5 */
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90;    /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0;       /* PWM steping rate in unit of PWM level percentage */
-	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
-
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01;    /* zone */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60;      /* AC0 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40;      /* AC1 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0;       /* AC2 threshold in Celsius */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0;       /* AC3 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0;       /* AC4 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0;       /* AC5 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0;       /* AC6 threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0;       /* AC7 lowest threshold in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0;       /* critical threshold* in Celsius, 0xFF is not define */
-	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
-
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01;    /* Zone */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0;       /* AL0 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0;       /* AL1 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0;       /* AL2 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00;    /* AL3 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00;    /* AL4 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00;    /* AL5 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00;    /* AL6 percentage */
-	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00;    /* AL7 percentage */
-
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2;     /* Zone */
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;     /* BIT0 | BIT2 | BIT5 */
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98;    /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5;       /* PWM steping rate in unit of PWM level percentage */
-	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
-
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3;     /* Zone */
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;     /* BIT0 | BIT2 | BIT5 */
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0;     /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0;       /* PWM steping rate in unit of PWM level percentage */
-	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
-
-	/* IMC Function */
-	FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;/* BIT0 | BIT4 |BIT8 */
-
-	/* NOTE:
-	 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
-	 * AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
-	 * so we remove it from AGESA code. Please See FchInitLateHwm.
-	 */
-
-#else /* HWM fan control, using the alternative method */
-	FchParams->Imc.ImcEnable = FALSE;
-	FchParams->Hwm.HwMonitorEnable = TRUE;
-	FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+	if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+		imc_reg_init();
+
+		/* HwMonitorEnable = TRUE &&  HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+		FchParams->Hwm.HwMonitorEnable = TRUE;
+		FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;       /* 0 disable, 1 enable TSI Auto Polling */
+
+		FchParams->Imc.ImcEnable = TRUE;
+		FchParams->Hwm.HwmControl = 1;	/* 1 IMC, 0 HWM */
+		FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+
+		LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+
+		/* Thermal Zone Parameter */
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00;    /* Zone */
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d;    /* BIT0 | BIT2 | BIT5 */
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;    /* 6 | BIT3 */
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98;    /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01;    /* PWM steping rate in unit of PWM level percentage */
+		FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+
+		/* IMC Fan Policy temperature thresholds */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00;    /* Zone */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;    /* AC0 threshold in Celsius */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c;    /* AC1 threshold in Celsius */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32;    /* AC2 threshold in Celsius */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff;    /* AC3 threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff;    /* AC4 threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff;    /* AC5 threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff;    /* AC6 threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff;    /* AC7 lowest threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b;    /* critical threshold* in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+
+		/* IMC Fan Policy PWM Settings */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00;    /* Zone */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a;    /* AL0 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46;    /* AL1 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28;    /* AL2 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff;    /* AL3 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff;    /* AL4 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff;    /* AL5 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff;    /* AL6 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff;    /* AL7 percentage */
+
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01;    /* Zone */
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;    /* BIT0 | BIT2 | BIT5 */
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90;    /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0;       /* PWM steping rate in unit of PWM level percentage */
+		FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
+
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01;    /* zone */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60;      /* AC0 threshold in Celsius */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40;      /* AC1 threshold in Celsius */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0;       /* AC2 threshold in Celsius */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0;       /* AC3 threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0;       /* AC4 threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0;       /* AC5 threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0;       /* AC6 threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0;       /* AC7 lowest threshold in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0;       /* critical threshold* in Celsius, 0xFF is not define */
+		FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
+
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01;    /* Zone */
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0;       /* AL0 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0;       /* AL1 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0;       /* AL2 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00;    /* AL3 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00;    /* AL4 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00;    /* AL5 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00;    /* AL6 percentage */
+		FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00;    /* AL7 percentage */
+
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2;     /* Zone */
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;     /* BIT0 | BIT2 | BIT5 */
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98;    /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5;       /* PWM steping rate in unit of PWM level percentage */
+		FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
+
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3;     /* Zone */
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;     /* BIT0 | BIT2 | BIT5 */
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0;     /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0;       /* PWM steping rate in unit of PWM level percentage */
+		FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
+
+		/* IMC Function */
+		FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;/* BIT0 | BIT4 |BIT8 */
+
+		/* NOTE:
+		 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+		 * AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
+		 * so we remove it from AGESA code. Please See FchInitLateHwm.
+		 */
+	} else {
+		/* HWM fan control, using the alternative method */
+		FchParams->Imc.ImcEnable = FALSE;
+		FchParams->Hwm.HwMonitorEnable = TRUE;
+		FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+	}
 }
 
 /**