amd/gardenia: Correct SPD AGESA callout

Gardenia makes no special considerations for a board_id regarding
SPD access and addressing.  Remove this from the source and use
the standard AGESA call.

Make SPD address changes to devicetree.cb.  Note that Gardenia is
designed to be a two channel, single DIMM/channel system (some SKUs
with two DIMMs on the second channel).  However, this port is for
the Stoney processor which is a single channel.  As a result, the
second DIMM slot is not usable.  A future improvement could involve
a port using a different processor, with unique devicetree files
for each.

Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 77511f98f819dfe08c3ed16ebc11e1b328bdca15)

Change-Id: Id00c2be83340ceeec043ec86e96779e6bf46ae7b
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/17219
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>

1 files changed, 3 insertions, 43 deletions

diff --git a/src/mainboard/amd/gardenia/BiosCallOuts.c b/src/mainboard/amd/gardenia/BiosCallOuts.c
index 380c3f41de..44644ce069 100644
--- a/src/mainboard/amd/gardenia/BiosCallOuts.c
+++ b/src/mainboard/amd/gardenia/BiosCallOuts.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015-2016 Advanced Micro Devices, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -35,14 +35,13 @@
 #include <boardid.h>
 
 static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
-static AGESA_STATUS board_ReadSpd(UINT32 Func, UINTN Data, VOID *ConfigPtr);
 
 const BIOS_CALLOUT_STRUCT BiosCallouts[] =
 {
 	{AGESA_ALLOCATE_BUFFER,          agesa_AllocateBuffer },
 	{AGESA_DEALLOCATE_BUFFER,        agesa_DeallocateBuffer },
 	{AGESA_LOCATE_BUFFER,            agesa_LocateBuffer },
-	{AGESA_READ_SPD,                 board_ReadSpd },
+	{AGESA_READ_SPD,                 agesa_ReadSpd },
 	{AGESA_DO_RESET,                 agesa_Reset },
 	{AGESA_READ_SPD_RECOVERY,        agesa_NoopUnsupported },
 	{AGESA_RUNFUNC_ONAP,             agesa_RunFuncOnAp },
@@ -104,43 +103,6 @@ AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
 	return AGESA_SUCCESS;
 }
 
-static AGESA_STATUS board_ReadSpd(UINT32 Func, UINTN Data, VOID *ConfigPtr)
-{
-#ifdef __PRE_RAM__
-	int spdAddress;
-	AGESA_READ_SPD_PARAMS *info = ConfigPtr;
-
-	ROMSTAGE_CONST struct device *dev = dev_find_slot(0, PCI_DEVFN(0x18, 2));
-	ROMSTAGE_CONST struct northbridge_amd_pi_00670F00_config *config = dev->chip_info;
-	UINT8 spdAddrLookup_rev_F [2][2][4]= {
-		{ {0xA0, 0xA2}, {0xA4, 0xAC}, }, /* socket 0 - Channel 0 & 1 - 8-bit SPD addresses */
-		{ {0x00, 0x00}, {0x00, 0x00}, }, /* socket 1 - Channel 0 & 1 - 8-bit SPD addresses */
-	};
-
-	if ((dev == 0) || (config == 0))
-		return AGESA_ERROR;
-	if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup))
-		return AGESA_ERROR;
-	if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0]))
-		return AGESA_ERROR;
-	if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0]))
-		return AGESA_ERROR;
-	if (board_id() == 'F')
-		spdAddress = spdAddrLookup_rev_F
-			[info->SocketId] [info->MemChannelId] [info->DimmId];
-	else
-		spdAddress = config->spdAddrLookup
-			[info->SocketId] [info->MemChannelId] [info->DimmId];
-
-	if (spdAddress == 0)
-		return AGESA_ERROR;
-	int err = hudson_readSpd(spdAddress, (void *) info->Buffer, 128);
-	if (err)
-		return AGESA_ERROR;
-#endif
-	return AGESA_SUCCESS;
-}
-
 #ifdef __PRE_RAM__
 
 const PSO_ENTRY DDR4PlatformMemoryConfiguration[] = {
@@ -157,8 +119,6 @@ const PSO_ENTRY DDR4PlatformMemoryConfiguration[] = {
 
 void OemPostParams(AMD_POST_PARAMS *PostParams)
 {
-	if (board_id() == 'F') {
-		PostParams->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)DDR4PlatformMemoryConfiguration;
-	}
+	PostParams->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)DDR4PlatformMemoryConfiguration;
 }
 #endif