diff options
| author | Stefan Reinauer <stepan@coresystems.de> | 2007-04-12 00:12:41 +0000 |
|---|---|---|
| committer | Stefan Reinauer <stepan@openbios.org> | 2007-04-12 00:12:41 +0000 |
| commit | b615c7bb3a01a1a3bfefb9f9e882c762ca4e19bd (patch) | |
| tree | f98ff1ee5bbf2a5d6f48b4082b0e237f66ee1d7f /src/mainboard/agami/aruma/Options.lb | |
| parent | 2f7b1deca3829acb3f6d2912e24900292b1b8d6e (diff) | |
Vendor specific patch, thus self-acked.
* going back to old board specific dsdt for agami aruma.
This is hopefully dropped again some day, but until then
here's a working solution.
* Some minor Agami specific changes.
* drop obsolete bringup workaround hyperclocking.diff
* increase image size again, x86emu wants it.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2606 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/agami/aruma/Options.lb')
| -rw-r--r-- | src/mainboard/agami/aruma/Options.lb | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/src/mainboard/agami/aruma/Options.lb b/src/mainboard/agami/aruma/Options.lb index 43f8791c82..25dc835733 100644 --- a/src/mainboard/agami/aruma/Options.lb +++ b/src/mainboard/agami/aruma/Options.lb @@ -54,11 +54,19 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses CONFIG_CHIP_NAME +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY + uses USE_DCACHE_RAM uses DCACHE_RAM_BASE uses DCACHE_RAM_SIZE uses CONFIG_USE_INIT +uses CONFIG_USE_PRINTK_IN_CAR + + uses SERIAL_CPU_INIT uses ENABLE_APIC_EXT_ID @@ -133,6 +141,18 @@ default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10 default LIFT_BSP_APIC_ID=0 +#HT Unit ID offset +#default HT_CHAIN_UNITID_BASE=0xa + +#real SB Unit ID +#default HT_CHAIN_END_UNITID_BASE=0x6 + +#make the SB HT chain on bus 0 +#default SB_HT_CHAIN_ON_BUS0=1 + +#allow capable device use that above 4G +#default CONFIG_PCI_64BIT_PREF_MEM=1 + ## ## enable CACHE_AS_RAM specifics ## @@ -140,6 +160,8 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcc000 default DCACHE_RAM_SIZE=0x4000 default CONFIG_USE_INIT=0 +#default CONFIG_USE_INIT=1 +#default CONFIG_USE_PRINTK_IN_CAR=1 ## ## Build code to setup a generic IOAPIC @@ -248,6 +270,8 @@ default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" #VGA default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 +#default CONFIG_CONSOLE_VGA=0 +#default CONFIG_PCI_ROM_RUN=0 ### End Options.lb end |