summaryrefslogtreecommitdiff
path: root/src/mainboard/Iwill/DK8S2
diff options
context:
space:
mode:
authorRonald G. Minnich <rminnich@gmail.com>2004-01-27 17:08:03 +0000
committerRonald G. Minnich <rminnich@gmail.com>2004-01-27 17:08:03 +0000
commit22489894e189616bb5694cfed8bd951951e68fae (patch)
treecc400c06112829e06fbe5c937848278fa80df2a9 /src/mainboard/Iwill/DK8S2
parentabf9fea4a0c975f56190d061efef9ddeb6b84f81 (diff)
will mainboards
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/Iwill/DK8S2')
-rw-r--r--src/mainboard/Iwill/DK8S2/Config.lb300
-rw-r--r--src/mainboard/Iwill/DK8S2/auto.c257
-rw-r--r--src/mainboard/Iwill/DK8S2/chip.h5
-rw-r--r--src/mainboard/Iwill/DK8S2/cmos.layout74
-rw-r--r--src/mainboard/Iwill/DK8S2/failover.c42
-rw-r--r--src/mainboard/Iwill/DK8S2/irq_tables.c52
-rw-r--r--src/mainboard/Iwill/DK8S2/mainboard.c41
-rw-r--r--src/mainboard/Iwill/DK8S2/mptable.c232
8 files changed, 1003 insertions, 0 deletions
diff --git a/src/mainboard/Iwill/DK8S2/Config.lb b/src/mainboard/Iwill/DK8S2/Config.lb
new file mode 100644
index 0000000000..cc57d6397b
--- /dev/null
+++ b/src/mainboard/Iwill/DK8S2/Config.lb
@@ -0,0 +1,300 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+default ROM_SIZE=524288
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=9
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=2
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+#default MAINBOARD_PART_NUMBER="HDAMA"
+#default MAINBOARD_VENDOR="ARIMA"
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default CONFIG_ROM_STREAM = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+#cpu k8 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+#object mainboard.o
+driver mainboard.o
+#object static_devices.o
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+end
+
+makerule ./failover.inc
+ depends "./failover.E ./romcc"
+ action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+end
+makerule ./auto.inc
+ depends "./auto.E ./romcc"
+ action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/i386/entry16.inc
+mainboardinit cpu/i386/entry32.inc
+ldscript /cpu/i386/entry16.lds
+ldscript /cpu/i386/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
+else
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+##
+## Setup our mtrrs
+##
+mainboardinit cpu/k8/earlymtrr.inc
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/k8/enable_mmx_sse.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/k8/disable_mmx_sse.inc
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+northbridge amd/amdk8 "mc0"
+ pci 0:18.0
+ pci 0:18.0
+ pci 0:18.0
+ pci 0:18.1
+ pci 0:18.2
+ pci 0:18.3
+ southbridge amd/amd8131 "amd8131" link 0
+ pci 0:0.0
+ pci 0:0.1
+ pci 0:1.0
+ pci 0:1.1
+ end
+ southbridge amd/amd8111 "amd8111" link 0
+ pci 0:0.0
+ pci 0:1.0 on
+ pci 0:1.1 on
+ pci 0:1.2 on
+ pci 0:1.3 on
+ pci 0:1.5 off
+ pci 0:1.6 off
+ pci 1:0.0 on
+ pci 1:0.1 on
+ pci 1:0.2 on
+ pci 1:1.0 off
+ superio winbond/w83627thf link 1
+ pnp 2e.0
+ pnp 2e.1
+ pnp 2e.2
+ pnp 2e.3
+ pnp 2e.4
+ pnp 2e.5
+ pnp 2e.6
+ pnp 2e.7
+ pnp 2e.8
+ pnp 2e.9
+ pnp 2e.a
+ register "com1" = "{1, 0, 0x3f8, 4}"
+ register "lpt" = "{1}"
+ end
+ end
+end
+
+northbridge amd/amdk8 "mc1"
+ pci 0:19.0
+ pci 0:19.0
+ pci 0:19.0
+ pci 0:19.1
+ pci 0:19.2
+ pci 0:19.3
+end
+
+cpu k8 "cpu0"
+ register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }"
+end
+
+cpu k8 "cpu1"
+end
+
+##
+## Include the old serial code for those few places that still need it.
+##
+mainboardinit pc80/serial.inc
+mainboardinit arch/i386/lib/console.inc
+
diff --git a/src/mainboard/Iwill/DK8S2/auto.c b/src/mainboard/Iwill/DK8S2/auto.c
new file mode 100644
index 0000000000..689346e6f2
--- /dev/null
+++ b/src/mainboard/Iwill/DK8S2/auto.c
@@ -0,0 +1,257 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <cpu/p6/apic.h>
+#include <arch/io.h>
+#include <device/pnp.h>
+#include <arch/romcc_io.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/k8/apic_timer.c"
+#include "lib/delay.c"
+#include "cpu/p6/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "debug.c"
+#include "northbridge/amd/amdk8/cpu_rev.c"
+
+#define SIO_BASE 0x2e
+
+static void memreset_setup(void)
+{
+ if (is_cpu_pre_c0()) {
+ /* Set the memreset low */
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Ensure the BIOS has control of the memory lines */
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ }
+ else {
+ /* Ensure the CPU has controll of the memory lines */
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ }
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+ if (is_cpu_pre_c0()) {
+ udelay(800);
+ /* Set memreset_high */
+ outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ udelay(90);
+ }
+}
+
+static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
+{
+ /* Routing Table Node i
+ *
+ * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c
+ * i: 0, 1, 2, 3, 4, 5, 6, 7
+ *
+ * [ 0: 3] Request Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ * [11: 8] Response Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ * [19:16] Broadcast route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ */
+
+ uint32_t ret=0x00010101; /* default row entry */
+
+ static const unsigned int rows_2p[2][2] = {
+ { 0x00050101, 0x00010404 },
+ { 0x00010404, 0x00050101 }
+ };
+
+ if(maxnodes>2) {
+ print_debug("this mainboard is only designed for 2 cpus\r\n");
+ maxnodes=2;
+ }
+
+
+ if (!(node>=maxnodes || row>=maxnodes)) {
+ ret=rows_2p[node][row];
+ }
+
+ return ret;
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+ /* nothing to do */
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+/* no specific code here. this should go away completely */
+static void coherent_ht_mainboard(unsigned cpus)
+{
+}
+
+#include "northbridge/amd/amdk8/raminit.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "sdram/generic_sdram.c"
+
+static void enable_lapic(void)
+{
+
+ msr_t msr;
+ msr = rdmsr(0x1b);
+ msr.hi &= 0xffffff00;
+ msr.lo &= 0x000007ff;
+ msr.lo |= APIC_DEFAULT_BASE | (1 << 11);
+ wrmsr(0x1b, msr);
+}
+
+static void stop_this_cpu(void)
+{
+ unsigned apicid;
+ apicid = apic_read(APIC_ID) >> 24;
+
+ /* Send an APIC INIT to myself */
+ apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+ apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
+ /* Wait for the ipi send to finish */
+ apic_wait_icr_idle();
+
+ /* Deassert the APIC INIT */
+ apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+ apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+ /* Wait for the ipi send to finish */
+ apic_wait_icr_idle();
+
+ /* If I haven't halted spin forever */
+ for(;;) {
+ hlt();
+ }
+}
+
+#define PC87360_FDC 0x00
+#define PC87360_PP 0x01
+#define PC87360_SP2 0x02
+#define PC87360_SP1 0x03
+#define PC87360_SWC 0x04
+#define PC87360_KBCM 0x05
+#define PC87360_KBCK 0x06
+#define PC87360_GPIO 0x07
+#define PC87360_ACB 0x08
+#define PC87360_FSCM 0x09
+#define PC87360_WDT 0x0A
+
+static void pc87360_enable_serial(void)
+{
+ pnp_set_logical_device(SIO_BASE, PC87360_SP1);
+ pnp_set_enable(SIO_BASE, 1);
+ pnp_set_iobase0(SIO_BASE, 0x3f8);
+}
+
+#define FIRST_CPU 1
+#define SECOND_CPU 1
+#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
+static void main(void)
+{
+ /*
+ * GPIO28 of 8111 will control H0_MEMRESET_L
+ * GPIO29 of 8111 will control H1_MEMRESET_L
+ */
+ static const struct mem_controller cpu[] = {
+#if FIRST_CPU
+ {
+ .node_id = 0,
+ .f0 = PCI_DEV(0, 0x18, 0),
+ .f1 = PCI_DEV(0, 0x18, 1),
+ .f2 = PCI_DEV(0, 0x18, 2),
+ .f3 = PCI_DEV(0, 0x18, 3),
+ .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
+ .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
+ },
+#endif
+#if SECOND_CPU
+ {
+ .node_id = 1,
+ .f0 = PCI_DEV(0, 0x19, 0),
+ .f1 = PCI_DEV(0, 0x19, 1),
+ .f2 = PCI_DEV(0, 0x19, 2),
+ .f3 = PCI_DEV(0, 0x19, 3),
+ .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
+ .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
+ },
+#endif
+ };
+ if (cpu_init_detected()) {
+ asm("jmp __cpu_reset");
+ }
+ enable_lapic();
+ init_timer();
+ if (!boot_cpu()) {
+ stop_this_cpu();
+ }
+ pc87360_enable_serial();
+ uart_init();
+ console_init();
+ setup_default_resource_map();
+ setup_coherent_ht_domain();
+ enumerate_ht_chain(0);
+ distinguish_cpu_resets(0);
+
+#if 0
+ print_pci_devices();
+#endif
+ enable_smbus();
+#if 0
+ dump_spd_registers(&cpu[0]);
+#endif
+ memreset_setup();
+ sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
+
+#if 1
+ dump_pci_devices();
+#endif
+#if 0
+ dump_pci_device(PCI_DEV(0, 0x18, 2));
+#endif
+
+ /* Check all of memory */
+#if 0
+ msr_t msr;
+ msr = rdmsr(TOP_MEM);
+ print_debug("TOP_MEM: ");
+ print_debug_hex32(msr.hi);
+ print_debug_hex32(msr.lo);
+ print_debug("\r\n");
+#endif
+#if 0
+ ram_check(0x00000000, msr.lo);
+#endif
+#if 0
+ static const struct {
+ unsigned long lo, hi;
+ } check_addrs[] = {
+ /* Check 16MB of memory @ 0*/
+ { 0x00000000, 0x01000000 },
+#if TOTAL_CPUS > 1
+ /* Check 16MB of memory @ 2GB */
+ { 0x80000000, 0x81000000 },
+#endif
+ };
+ int i;
+ for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
+ ram_check(check_addrs[i].lo, check_addrs[i].hi);
+ }
+#endif
+}
diff --git a/src/mainboard/Iwill/DK8S2/chip.h b/src/mainboard/Iwill/DK8S2/chip.h
new file mode 100644
index 0000000000..9836e2dfa9
--- /dev/null
+++ b/src/mainboard/Iwill/DK8S2/chip.h
@@ -0,0 +1,5 @@
+struct chip_control mainboard_arima_hdama_control;
+
+struct mainboard_arima_hdama_config {
+ int nothing;
+};
diff --git a/src/mainboard/Iwill/DK8S2/cmos.layout b/src/mainboard/Iwill/DK8S2/cmos.layout
new file mode 100644
index 0000000000..5ba4c032c1
--- /dev/null
+++ b/src/mainboard/Iwill/DK8S2/cmos.layout
@@ -0,0 +1,74 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+1008 16 h 0 check_sum
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+
+checksums
+
+checksum 392 1007 1008
+
+
diff --git a/src/mainboard/Iwill/DK8S2/failover.c b/src/mainboard/Iwill/DK8S2/failover.c
new file mode 100644
index 0000000000..bd9c17020e
--- /dev/null
+++ b/src/mainboard/Iwill/DK8S2/failover.c
@@ -0,0 +1,42 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include "arch/romcc_io.h"
+#include "pc80/mc146818rtc_early.c"
+#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "cpu/p6/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+
+static void main(void)
+{
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain(0);
+
+ /* Setup the 8111 */
+ amd8111_enable_rom();
+
+ /* Is this a cpu reset? */
+ if (cpu_init_detected()) {
+ if (last_boot_normal()) {
+ asm("jmp __normal_image");
+ } else {
+ asm("jmp __cpu_reset");
+ }
+ }
+ /* Is this a deliberate reset by the bios */
+ else if (bios_reset_detected() && last_boot_normal()) {
+ asm("jmp __normal_image");
+ }
+ /* Is this a secondary cpu? */
+ else if (!boot_cpu() && last_boot_normal()) {
+ asm("jmp __normal_image");
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ asm("jmp __normal_image");
+ }
+}
diff --git a/src/mainboard/Iwill/DK8S2/irq_tables.c b/src/mainboard/Iwill/DK8S2/irq_tables.c
new file mode 100644
index 0000000000..9be2d1cf14
--- /dev/null
+++ b/src/mainboard/Iwill/DK8S2/irq_tables.c
@@ -0,0 +1,52 @@
+#include <arch/pirq_routing.h>
+#include <device/pci.h>
+
+#define IRQ_ROUTER_BUS 1
+#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3)
+#define IRQ_ROUTER_VENDOR 0x1022
+#define IRQ_ROUTER_DEVICE 0x746b
+
+#define AVAILABLE_IRQS 0xdef8
+#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \
+ { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \
+ {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0}
+
+/* Each IRQ_SLOT entry consists of:
+ * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu
+ */
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT
+ * devices on the bus */
+ IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */
+ IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */
+ 0x00, /* IRQs devoted exclusively to PCI usage */
+ IRQ_ROUTER_VENDOR, /* Vendor */
+ IRQ_ROUTER_DEVICE, /* Device */
+ 0x00, /* Crap (miniport) */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+ 0x00, /* u8 checksum , mod 256 checksum must give
+ * zero, will be corrected later
+ */
+ {
+
+ /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */
+
+ /* PCI Slot 1-6 */
+ IRQ_SLOT (1, 3,1,0, 2,3,4,1 ),
+ IRQ_SLOT (2, 3,2,0, 3,4,1,2 ),
+ IRQ_SLOT (3, 2,1,0, 2,3,4,1 ),
+ IRQ_SLOT (4, 2,2,0, 3,4,1,2 ),
+ IRQ_SLOT (5, 4,5,0, 2,3,4,1 ),
+ IRQ_SLOT (6, 4,4,0, 1,2,3,4 ),
+
+ /* Onboard NICs */
+ IRQ_SLOT (0, 2,3,0, 4,0,0,0 ),
+ IRQ_SLOT (0, 2,4,0, 4,0,0,0 ),
+
+ /* Let Linux know about bus 1 */
+ IRQ_SLOT (0, 1,4,3, 0,0,0,0 ),
+ }
+};
diff --git a/src/mainboard/Iwill/DK8S2/mainboard.c b/src/mainboard/Iwill/DK8S2/mainboard.c
new file mode 100644
index 0000000000..82041282f6
--- /dev/null
+++ b/src/mainboard/Iwill/DK8S2/mainboard.c
@@ -0,0 +1,41 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+
+#include <arch/io.h>
+#include <device/chip.h>
+#include "../../../northbridge/amd/amdk8/northbridge.h"
+#include "chip.h"
+
+
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
+{
+ 0, 1,
+};
+
+static struct device_operations mainboard_operations = {
+ .read_resources = root_dev_read_resources,
+ .set_resources = root_dev_set_resources,
+ .enable_resources = enable_childrens_resources,
+ .init = 0,
+ .scan_bus = amdk8_scan_root_bus,
+ .enable = 0,
+};
+
+static void enumerate(struct chip *chip)
+{
+ struct chip *child;
+ dev_root.ops = &mainboard_operations;
+ chip->dev = &dev_root;
+ chip->bus = 0;
+ for(child = chip->children; child; child = child->next) {
+ child->bus = &dev_root.link[0];
+ }
+}
+struct chip_control mainboard_arima_hdama_control = {
+ .enumerate = enumerate,
+ .name = "Arima HDAMA mainboard ",
+};
+
diff --git a/src/mainboard/Iwill/DK8S2/mptable.c b/src/mainboard/Iwill/DK8S2/mptable.c
new file mode 100644
index 0000000000..bd9df2e3ac
--- /dev/null
+++ b/src/mainboard/Iwill/DK8S2/mptable.c
@@ -0,0 +1,232 @@
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+
+void *smp_write_config_table(void *v, unsigned long * processor_map)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "LNXI ";
+ static const char productid[12] = "HDAMA ";
+ struct mp_config_table *mc;
+ unsigned char bus_num;
+ unsigned char bus_isa;
+ unsigned char bus_8131_1;
+ unsigned char bus_8131_2;
+ unsigned char bus_8111_1;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc, processor_map);
+
+ {
+ device_t dev;
+
+ /* 8111 */
+ dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
+ if (dev) {
+ bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
+
+ bus_8111_1 = 4;
+ bus_isa = 5;
+ }
+ /* 8131-1 */
+ dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
+ if (dev) {
+ bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
+
+ bus_8131_1 = 2;
+ }
+ /* 8131-2 */
+ dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
+ if (dev) {
+ bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
+
+ bus_8131_2 = 3;
+ }
+ }
+
+ /* define bus and isa numbers */
+ for(bus_num = 0; bus_num < bus_isa; bus_num++) {
+ smp_write_bus(mc, bus_num, "PCI ");
+ }
+ smp_write_bus(mc, bus_isa, "ISA ");
+
+ /* IOAPIC handling */
+
+ smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
+ {
+ device_t dev;
+ uint32_t base;
+ /* 8131 apic 3 */
+ dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
+ if (dev) {
+ base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+ base &= PCI_BASE_ADDRESS_MEM_MASK;
+ smp_write_ioapic(mc, 0x03, 0x11, base);
+ }
+ /* 8131 apic 4 */
+ dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
+ if (dev) {
+ base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+ base &= PCI_BASE_ADDRESS_MEM_MASK;
+ smp_write_ioapic(mc, 0x04, 0x11, base);
+ }
+ }
+
+ /* ISA backward compatibility interrupts */
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x00, 0x02, 0x00);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x01, 0x02, 0x01);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x00, 0x02, 0x02);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x03, 0x02, 0x03);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x04, 0x02, 0x04);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x05, 0x02, 0x05);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x06, 0x02, 0x06);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x07, 0x02, 0x07);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x08, 0x02, 0x08);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x09, 0x02, 0x09);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x0a, 0x02, 0x0a);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x0b, 0x02, 0x0b);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x0c, 0x02, 0x0c);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x0d, 0x02, 0x0d);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x0e, 0x02, 0x0e);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x0f, 0x02, 0x0f);
+
+ /* Standard local interrupt assignments */
+ smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x00, MP_APIC_ALL, 0x00);
+ smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_isa, 0x00, MP_APIC_ALL, 0x01);
+
+
+ /* PCI Slot 1 */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_2, (1<<2)|0, 0x02, 0x11);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_2, (1<<2)|1, 0x02, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_2, (1<<2)|2, 0x02, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_2, (1<<2)|3, 0x02, 0x10);
+
+ /* PCI Slot 2 */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_2, (2<<2)|0, 0x02, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_2, (2<<2)|1, 0x02, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_2, (2<<2)|2, 0x02, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_2, (2<<2)|3, 0x02, 0x11);
+
+ /* PCI Slot 3 */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (1<<2)|0, 0x02, 0x11);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (1<<2)|1, 0x02, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (1<<2)|2, 0x02, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (1<<2)|3, 0x02, 0x10);
+
+ /* PCI Slot 4 */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (2<<2)|0, 0x02, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (2<<2)|1, 0x02, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (2<<2)|2, 0x02, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (2<<2)|3, 0x02, 0x11);
+
+ /* PCI Slot 5 */
+#warning "FIXME get the irqs right, it's just hacked to work for now"
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8111_1, (5<<2)|0, 0x02, 0x11);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8111_1, (5<<2)|1, 0x02, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8111_1, (5<<2)|2, 0x02, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8111_1, (5<<2)|3, 0x02, 0x10);
+
+ /* PCI Slot 6 */
+#warning "FIXME get the irqs right, it's just hacked to work for now"
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8111_1, (4<<2)|0, 0x02, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8111_1, (4<<2)|1, 0x02, 0x11);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8111_1, (4<<2)|2, 0x02, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8111_1, (4<<2)|3, 0x02, 0x13);
+
+ /* On board nics */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (3<<2)|0, 0x02, 0x13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
+ bus_8131_1, (4<<2)|0, 0x02, 0x13);
+
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v, processor_map);
+}
+