ipq8064: SOC UART driver belongs in the SOC directory

Move the driver to where it belongs.

BUG=chrome-os-partner:27784
TEST=none

Original-Change-Id: Iee33de0b29a6bb86ba7c37e7e89aabc0fee42e80
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196658
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 64afb0a2ac9b6cd4c202b879a484220e70ff5bbe)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>

Change-Id: Iee33de0b29a6bb86ba7c37e7e89aabc0fee42e80
Reviewed-on: http://review.coreboot.org/7871
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)

1 files changed, 0 insertions, 440 deletions

diff --git a/src/lib/uart_ipq806.c b/src/lib/uart_ipq806.c
deleted file mode 100644
index c65f876821..0000000000
--- a/src/lib/uart_ipq806.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * Copyright (c) 2012 The Linux Foundation. All rights reserved.
- * Source : APQ8064 LK boot
- *
- * Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name of Google, Inc. nor the names of its contributors
- *    may be used to endorse or promote products derived from this
- *    software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-
-#include <common.h>
-#include <asm/arch-ipq806x/gsbi.h>
-#include <asm/arch-ipq806x/clock.h>
-#include <asm/arch-ipq806x/uart.h>
-#include <serial.h>
-
-#define FIFO_DATA_SIZE	4
-
-extern board_ipq806x_params_t *gboard_param;
-
-static unsigned int msm_boot_uart_dm_init(unsigned int  uart_dm_base);
-
-/* Received data is valid or not */
-static int valid_data = 0;
-
-/* Received data */
-static unsigned int word = 0;
-
-/**
- * msm_boot_uart_dm_init_rx_transfer - Init Rx transfer
- * @uart_dm_base: UART controller base address
- */
-static unsigned int msm_boot_uart_dm_init_rx_transfer(unsigned int uart_dm_base)
-{
-	/* Reset receiver */
-	writel(MSM_BOOT_UART_DM_CMD_RESET_RX,
-		MSM_BOOT_UART_DM_CR(uart_dm_base));
-
-	/* Enable receiver */
-	writel(MSM_BOOT_UART_DM_CR_RX_ENABLE,
-		MSM_BOOT_UART_DM_CR(uart_dm_base));
-	writel(MSM_BOOT_UART_DM_DMRX_DEF_VALUE,
-		MSM_BOOT_UART_DM_DMRX(uart_dm_base));
-
-	/* Clear stale event */
-	writel(MSM_BOOT_UART_DM_CMD_RES_STALE_INT,
-		MSM_BOOT_UART_DM_CR(uart_dm_base));
-
-	/* Enable stale event */
-	writel(MSM_BOOT_UART_DM_GCMD_ENA_STALE_EVT,
-		MSM_BOOT_UART_DM_CR(uart_dm_base));
-
-	return MSM_BOOT_UART_DM_E_SUCCESS;
-}
-
-/**
- * msm_boot_uart_dm_read - reads a word from the RX FIFO.
- * @data: location where the read data is stored
- * @count: no of valid data in the FIFO
- * @wait: indicates blocking call or not blocking call
- *
- * Reads a word from the RX FIFO. If no data is available blocks if
- * @wait is true, else returns %MSM_BOOT_UART_DM_E_RX_NOT_READY.
- */
-static unsigned int
-msm_boot_uart_dm_read(unsigned int *data, int *count, int wait)
-{
-	static int total_rx_data = 0;
-	static int rx_data_read = 0;
-	unsigned int  base = 0;
-	uint32_t status_reg;
-
-	base = gboard_param->uart_dm_base;
-
-	if (data == NULL)
-		return MSM_BOOT_UART_DM_E_INVAL;
-
-	status_reg = readl(MSM_BOOT_UART_DM_MISR(base));
-
-	/* Check for DM_RXSTALE for RX transfer to finish */
-	while (!(status_reg & MSM_BOOT_UART_DM_RXSTALE)) {
-		status_reg = readl(MSM_BOOT_UART_DM_MISR(base));
-		if (!wait)
-			return MSM_BOOT_UART_DM_E_RX_NOT_READY;
-	}
-
-	/* Check for Overrun error. We'll just reset Error Status */
-	if (readl(MSM_BOOT_UART_DM_SR(base)) &
-			MSM_BOOT_UART_DM_SR_UART_OVERRUN) {
-		writel(MSM_BOOT_UART_DM_CMD_RESET_ERR_STAT,
-			MSM_BOOT_UART_DM_CR(base));
-		total_rx_data = rx_data_read = 0;
-		msm_boot_uart_dm_init(base);
-		return MSM_BOOT_UART_DM_E_RX_NOT_READY;
-	}
-
-	/* Read UART_DM_RX_TOTAL_SNAP for actual number of bytes received */
-	if (total_rx_data == 0)
-		total_rx_data =  readl(MSM_BOOT_UART_DM_RX_TOTAL_SNAP(base));
-
-	/* Data available in FIFO; read a word. */
-	*data = readl(MSM_BOOT_UART_DM_RF(base, 0));
-
-	/* WAR for http://prism/CR/548280 */
-	if (*data == 0) {
-		return MSM_BOOT_UART_DM_E_RX_NOT_READY;
-	}
-
-	/* increment the total count of chars we've read so far */
-	rx_data_read += FIFO_DATA_SIZE;
-
-	/* actual count of valid data in word */
-	*count = ((total_rx_data < rx_data_read) ?
-			(FIFO_DATA_SIZE - (rx_data_read - total_rx_data)) :
-			FIFO_DATA_SIZE);
-
-	/* If there are still data left in FIFO we'll read them before
-	 * initializing RX Transfer again
-	 */
-	if (rx_data_read < total_rx_data)
-		return MSM_BOOT_UART_DM_E_SUCCESS;
-
-	msm_boot_uart_dm_init_rx_transfer(base);
-	total_rx_data = rx_data_read = 0;
-
-	return MSM_BOOT_UART_DM_E_SUCCESS;
-}
-
-/**
- * msm_boot_uart_replace_lr_with_cr - replaces "\n" with "\r\n"
- * @data_in:      characters to be converted
- * @num_of_chars: no. of characters
- * @data_out:     location where converted chars are stored
- *
- * Replace linefeed char "\n" with carriage return + linefeed
- * "\r\n". Currently keeping it simple than efficient.
- */
-static unsigned int
-msm_boot_uart_replace_lr_with_cr(char *data_in,
-                                 int num_of_chars,
-                                 char *data_out, int *num_of_chars_out)
-{
-        int i = 0, j = 0;
-
-        if ((data_in == NULL) || (data_out == NULL) || (num_of_chars < 0))
-                return MSM_BOOT_UART_DM_E_INVAL;
-
-        for (i = 0, j = 0; i < num_of_chars; i++, j++) {
-                if (data_in[i] == '\n')
-                        data_out[j++] = '\r';
-
-                data_out[j] = data_in[i];
-        }
-
-        *num_of_chars_out = j;
-
-        return MSM_BOOT_UART_DM_E_SUCCESS;
-}
-
-/**
- * msm_boot_uart_dm_write - transmit data
- * @data:          data to transmit
- * @num_of_chars:  no. of bytes to transmit
- *
- * Writes the data to the TX FIFO. If no space is available blocks
- * till space becomes available.
- */
-static unsigned int
-msm_boot_uart_dm_write(char *data, unsigned int num_of_chars)
-{
-	unsigned int tx_word_count = 0;
-	unsigned int tx_char_left = 0, tx_char = 0;
-	unsigned int tx_word = 0;
-	int i = 0;
-	char *tx_data = NULL;
-	char new_data[1024];
-	unsigned int base = gboard_param->uart_dm_base;
-
-        if ((data == NULL) || (num_of_chars <= 0))
-                return MSM_BOOT_UART_DM_E_INVAL;
-
-        /* Replace line-feed (/n) with carriage-return + line-feed (/r/n) */
-        msm_boot_uart_replace_lr_with_cr(data, num_of_chars, new_data, &i);
-
-        tx_data = new_data;
-        num_of_chars = i;
-
-        /* Write to NO_CHARS_FOR_TX register number of characters
-        * to be transmitted. However, before writing TX_FIFO must
-        * be empty as indicated by TX_READY interrupt in IMR register
-        */
-        /* Check if transmit FIFO is empty.
-        * If not we'll wait for TX_READY interrupt. */
-
-        if (!(readl(MSM_BOOT_UART_DM_SR(base)) & MSM_BOOT_UART_DM_SR_TXEMT)) {
-                while (!(readl(MSM_BOOT_UART_DM_ISR(base)) & MSM_BOOT_UART_DM_TX_READY))
-                        __udelay(1);
-        }
-
-        /* We are here. FIFO is ready to be written. */
-        /* Write number of characters to be written */
-        writel(num_of_chars, MSM_BOOT_UART_DM_NO_CHARS_FOR_TX(base));
-
-        /* Clear TX_READY interrupt */
-        writel(MSM_BOOT_UART_DM_GCMD_RES_TX_RDY_INT, MSM_BOOT_UART_DM_CR(base));
-
-        /* We use four-character word FIFO. So we need to divide data into
-        * four characters and write in UART_DM_TF register */
-        tx_word_count = (num_of_chars % 4) ? ((num_of_chars / 4) + 1) :
-                        (num_of_chars / 4);
-        tx_char_left = num_of_chars;
-
-        for (i = 0; i < (int)tx_word_count; i++) {
-                tx_char = (tx_char_left < 4) ? tx_char_left : 4;
-                PACK_CHARS_INTO_WORDS(tx_data, tx_char, tx_word);
-
-                /* Wait till TX FIFO has space */
-                while (!(readl(MSM_BOOT_UART_DM_SR(base)) & MSM_BOOT_UART_DM_SR_TXRDY))
-                        __udelay(1);
-
-                /* TX FIFO has space. Write the chars */
-                writel(tx_word, MSM_BOOT_UART_DM_TF(base, 0));
-                tx_char_left = num_of_chars - (i + 1) * 4;
-                tx_data = tx_data + 4;
-        }
-
-        return MSM_BOOT_UART_DM_E_SUCCESS;
-}
-
-/*
- * msm_boot_uart_dm_reset - resets UART controller
- * @base: UART controller base address
- */
-static unsigned int msm_boot_uart_dm_reset(unsigned int base)
-{
-	writel(MSM_BOOT_UART_DM_CMD_RESET_RX, MSM_BOOT_UART_DM_CR(base));
-	writel(MSM_BOOT_UART_DM_CMD_RESET_TX, MSM_BOOT_UART_DM_CR(base));
-	writel(MSM_BOOT_UART_DM_CMD_RESET_ERR_STAT, MSM_BOOT_UART_DM_CR(base));
-	writel(MSM_BOOT_UART_DM_CMD_RES_TX_ERR, MSM_BOOT_UART_DM_CR(base));
-	writel(MSM_BOOT_UART_DM_CMD_RES_STALE_INT, MSM_BOOT_UART_DM_CR(base));
-
-	return MSM_BOOT_UART_DM_E_SUCCESS;
-}
-
-/*
- * msm_boot_uart_dm_init - initilaizes UART controller
- * @uart_dm_base: UART controller base address
- */
-static unsigned int msm_boot_uart_dm_init(unsigned int  uart_dm_base)
-{
-	/* Configure UART mode registers MR1 and MR2 */
-	/* Hardware flow control isn't supported */
-	writel(0x0, MSM_BOOT_UART_DM_MR1(uart_dm_base));
-
-	/* 8-N-1 configuration: 8 data bits - No parity - 1 stop bit */
-	writel(MSM_BOOT_UART_DM_8_N_1_MODE, MSM_BOOT_UART_DM_MR2(uart_dm_base));
-
-	/* Configure Interrupt Mask register IMR */
-	writel(MSM_BOOT_UART_DM_IMR_ENABLED, MSM_BOOT_UART_DM_IMR(uart_dm_base));
-
-	/*
-	 * Configure Tx and Rx watermarks configuration registers
-	 * TX watermark value is set to 0 - interrupt is generated when
-	 * FIFO level is less than or equal to 0
-	 */
-	writel(MSM_BOOT_UART_DM_TFW_VALUE, MSM_BOOT_UART_DM_TFWR(uart_dm_base));
-
-	/* RX watermark value */
-	writel(MSM_BOOT_UART_DM_RFW_VALUE, MSM_BOOT_UART_DM_RFWR(uart_dm_base));
-
-	/* Configure Interrupt Programming Register */
-	/* Set initial Stale timeout value */
-	writel(MSM_BOOT_UART_DM_STALE_TIMEOUT_LSB,
-		MSM_BOOT_UART_DM_IPR(uart_dm_base));
-
-	/* Configure IRDA if required */
-	/* Disabling IRDA mode */
-	writel(0x0, MSM_BOOT_UART_DM_IRDA(uart_dm_base));
-
-	/* Configure hunt character value in HCR register */
-	/* Keep it in reset state */
-	writel(0x0, MSM_BOOT_UART_DM_HCR(uart_dm_base));
-
-	/*
-	 * Configure Rx FIFO base address
-	 * Both TX/RX shares same SRAM and default is half-n-half.
-	 * Sticking with default value now.
-	 * As such RAM size is (2^RAM_ADDR_WIDTH, 32-bit entries).
-	 * We have found RAM_ADDR_WIDTH = 0x7f
-	 */
-
-	/* Issue soft reset command */
-	msm_boot_uart_dm_reset(uart_dm_base);
-
-	/* Enable/Disable Rx/Tx DM interfaces */
-	/* Data Mover not currently utilized. */
-	writel(0x0, MSM_BOOT_UART_DM_DMEN(uart_dm_base));
-
-	/* Enable transmitter */
-	writel(MSM_BOOT_UART_DM_CR_TX_ENABLE,
-		MSM_BOOT_UART_DM_CR(uart_dm_base));
-
-	/* Initialize Receive Path */
-	msm_boot_uart_dm_init_rx_transfer(uart_dm_base);
-
-	return 0;
-}
-
-/**
- * uart_dm_init - initializes UART
- *
- * Initializes clocks, GPIO and UART controller.
- */
-static int uart_dm_init(void)
-{
-	unsigned int dm_base, gsbi_base;
-
-	dm_base = gboard_param->uart_dm_base;
-	gsbi_base = gboard_param->uart_gsbi_base;
-	ipq_configure_gpio(gboard_param->dbg_uart_gpio, NO_OF_DBG_UART_GPIOS);
-
-	/* Configure the uart clock */
-        uart_clock_config(gboard_param->uart_gsbi,
-		gboard_param->mnd_value.m_value,
-		gboard_param->mnd_value.n_value,
-		gboard_param->mnd_value.d_value,
-		gboard_param->clk_dummy);
-
-	writel(GSBI_PROTOCOL_CODE_I2C_UART <<
-		GSBI_CTRL_REG_PROTOCOL_CODE_S,
-		GSBI_CTRL_REG(gsbi_base));
-        writel(UART_DM_CLK_RX_TX_BIT_RATE, MSM_BOOT_UART_DM_CSR(dm_base));
-	/* Intialize UART_DM */
-	msm_boot_uart_dm_init(dm_base);
-
-	return 0;
-}
-
-/**
- * ipq806x_serial_putc - transmits a character
- * @c: character to transmit
- */
-static void ipq806x_serial_putc(char c)
-{
-        msm_boot_uart_dm_write(&c, 1);
-}
-
-/**
- * ipq806x_serial_puts - transmits a string of data
- * @s: string to transmit
- */
-static void ipq806x_serial_puts(const char *s)
-{
-        while (*s != '\0')
-                serial_putc(*s++);
-}
-
-/**
- * ipq806x_serial_tstc - checks if data available for reading
- *
- * Returns 1 if data available, 0 otherwise
- */
-static int ipq806x_serial_tstc(void)
-{
-	/* Return if data is already read */
-	if (valid_data)
-		return 1;
-
-	/* Read data from the FIFO */
-	if (msm_boot_uart_dm_read(&word, &valid_data, 0) != MSM_BOOT_UART_DM_E_SUCCESS)
-		return 0;
-
-	return 1;
-}
-
-/**
- * ipq806x_serial_getc - reads a character
- *
- * Returns the character read from serial port.
- */
-static int ipq806x_serial_getc(void)
-{
-	int byte;
-
-	while (!serial_tstc()) {
-		/* wait for incoming data */
-	}
-
-	byte = (int)word & 0xff;
-	word = word >> 8;
-	valid_data--;
-
-	return byte;
-}
-
-static struct serial_device ipq_serial_device = {
-	.name = "ipq_serial",
-	.start = uart_dm_init,
-	.getc = ipq806x_serial_getc,
-	.tstc = ipq806x_serial_tstc,
-	.putc = ipq806x_serial_putc,
-	.puts = ipq806x_serial_puts,
-};
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &ipq_serial_device;
-}
-
-/**
- * ipq806x_serial_init - initializes serial controller
- */
-void ipq806x_serial_initialize(void)
-{
-	serial_register(&ipq_serial_device);
-}