diff options
| author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2013-06-06 10:33:39 +0300 |
|---|---|---|
| committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2013-08-23 05:04:30 +0200 |
| commit | 6bfe61d5d15d32d307047eeee8493d0e3ffa42ab (patch) | |
| tree | 6ba2f21ea91c3d882793ac8f7c2e99a288b6accc /src/lib | |
| parent | d79914008abbc3eea4738d702ea7f3256e13327a (diff) | |
usbdebug: Add compatibility quirk for FX2
This quirk is needed with a DIY debug dongle using obsolete
CY7C68013 (aka FX2) USB chips. Old revision of chip requires a
SET_CONFIGURATION to be sent, while this is not required in EHCI
debug port specs.
Change-Id: I4926eb19b7e991d6efeef782682756571ad006b9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Diffstat (limited to 'src/lib')
| -rw-r--r-- | src/lib/usbdebug.c | 15 |
1 files changed, 14 insertions, 1 deletions
diff --git a/src/lib/usbdebug.c b/src/lib/usbdebug.c index a5d3c37027..53ba4db53c 100644 --- a/src/lib/usbdebug.c +++ b/src/lib/usbdebug.c @@ -411,7 +411,7 @@ static int usbdebug_init_(unsigned ehci_bar, unsigned offset, struct ehci_debug_ u32 cmd, ctrl, status, portsc, hcs_params; u32 debug_port, new_debug_port = 0, n_ports; u32 devnum; - int ret, i; + int ret, i, configured; int loop; int port_map_tried; int playtimes = 3; @@ -569,9 +569,22 @@ try_next_port: dprintk(BIOS_INFO, "EHCI debug interface enabled.\n"); /* Perform a small write to get the even/odd data state in sync */ + configured = 0; +small_write: ret = dbgp_bulk_write(ehci_debug, USB_DEBUG_DEVNUM, dbgp_desc.bDebugOutEndpoint, "USB\r\n",5); if (ret < 0) { dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret); + if (!configured) { + /* Send Set Configure request to device. This is required for FX2 + (CY7C68013) to transfer from USB state Addressed to Configured, + only then endpoints other than 0 are enabled. */ + if (dbgp_control_msg(ehci_debug, USB_DEBUG_DEVNUM, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_CONFIGURATION, 1, 0, NULL, 0) >= 0) { + configured = 1; + goto small_write; + } + } ret = -9; goto err; } |