mipi: Make panel init callback work directly on DSI transaction types

Our MIPI panel initialization framework differentiates between DCS and
GENERIC commands, but the exact interpretation of those terms is left to
the platform drivers. In practice, the MIPI DSI transaction codes for
these are standardized and platforms always need to do the same
operation of combining the command length and transfer type into a
correct DSI protocol code. This patch factors out the various
platform-specific DSI protocol definitions into a single global one and
moves the transaction type calculation into the common panel framework.

The Qualcomm SC7180 implementation which previously only supported DCS
commands is enhanced to (hopefully? untested for now...) also support
GENERIC commands. While we're rewriting that whole section also fix some
other issues about how exactly long and short commands need to be passed
to that hardware which we identified in the meantime.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I09ade7857ca04e89d286cf538b1a5ebb1eeb8c04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>

2 files changed, 114 insertions, 1 deletions

diff --git a/src/include/mipi/dsi.h b/src/include/mipi/dsi.h
new file mode 100644
index 0000000000..9f11490f69
--- /dev/null
+++ b/src/include/mipi/dsi.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __MIPI_DSI_H__
+#define __MIPI_DSI_H__
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum mipi_dsi_transaction {
+	MIPI_DSI_V_SYNC_START				= 0x01,
+	MIPI_DSI_V_SYNC_END				= 0x11,
+	MIPI_DSI_H_SYNC_START				= 0x21,
+	MIPI_DSI_H_SYNC_END				= 0x31,
+
+	MIPI_DSI_COLOR_MODE_OFF				= 0x02,
+	MIPI_DSI_COLOR_MODE_ON				= 0x12,
+	MIPI_DSI_SHUTDOWN_PERIPHERAL			= 0x22,
+	MIPI_DSI_TURN_ON_PERIPHERAL			= 0x32,
+
+	MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM		= 0x03,
+	MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM		= 0x13,
+	MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM		= 0x23,
+
+	MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM		= 0x04,
+	MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM		= 0x14,
+	MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM		= 0x24,
+
+	MIPI_DSI_DCS_SHORT_WRITE			= 0x05,
+	MIPI_DSI_DCS_SHORT_WRITE_PARAM			= 0x15,
+
+	MIPI_DSI_DCS_READ				= 0x06,
+
+	MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE		= 0x37,
+
+	MIPI_DSI_END_OF_TRANSMISSION			= 0x08,
+
+	MIPI_DSI_NULL_PACKET				= 0x09,
+	MIPI_DSI_BLANKING_PACKET			= 0x19,
+	MIPI_DSI_GENERIC_LONG_WRITE			= 0x29,
+	MIPI_DSI_DCS_LONG_WRITE				= 0x39,
+
+	MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20	= 0x0c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24		= 0x1c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16		= 0x2c,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_30			= 0x0d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_36			= 0x1d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12		= 0x3d,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_16			= 0x0e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_18			= 0x1e,
+	MIPI_DSI_PIXEL_STREAM_3BYTE_18			= 0x2e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_24			= 0x3e,
+};
+
+/* MIPI DSI Peripheral-to-Processor transaction types */
+enum {
+	MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT	= 0x02,
+	MIPI_DSI_RX_END_OF_TRANSMISSION			= 0x08,
+	MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE	= 0x11,
+	MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE	= 0x12,
+	MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE		= 0x1a,
+	MIPI_DSI_RX_DCS_LONG_READ_RESPONSE		= 0x1c,
+	MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE	= 0x21,
+	MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE	= 0x22,
+};
+
+/* MIPI DCS commands */
+enum {
+	MIPI_DCS_NOP			= 0x00,
+	MIPI_DCS_SOFT_RESET		= 0x01,
+	MIPI_DCS_GET_DISPLAY_ID		= 0x04,
+	MIPI_DCS_GET_RED_CHANNEL	= 0x06,
+	MIPI_DCS_GET_GREEN_CHANNEL	= 0x07,
+	MIPI_DCS_GET_BLUE_CHANNEL	= 0x08,
+	MIPI_DCS_GET_DISPLAY_STATUS	= 0x09,
+	MIPI_DCS_GET_POWER_MODE		= 0x0A,
+	MIPI_DCS_GET_ADDRESS_MODE	= 0x0B,
+	MIPI_DCS_GET_PIXEL_FORMAT	= 0x0C,
+	MIPI_DCS_GET_DISPLAY_MODE	= 0x0D,
+	MIPI_DCS_GET_SIGNAL_MODE	= 0x0E,
+	MIPI_DCS_GET_DIAGNOSTIC_RESULT	= 0x0F,
+	MIPI_DCS_ENTER_SLEEP_MODE	= 0x10,
+	MIPI_DCS_EXIT_SLEEP_MODE	= 0x11,
+	MIPI_DCS_ENTER_PARTIAL_MODE	= 0x12,
+	MIPI_DCS_ENTER_NORMAL_MODE	= 0x13,
+	MIPI_DCS_EXIT_INVERT_MODE	= 0x20,
+	MIPI_DCS_ENTER_INVERT_MODE	= 0x21,
+	MIPI_DCS_SET_GAMMA_CURVE	= 0x26,
+	MIPI_DCS_SET_DISPLAY_OFF	= 0x28,
+	MIPI_DCS_SET_DISPLAY_ON		= 0x29,
+	MIPI_DCS_SET_COLUMN_ADDRESS	= 0x2A,
+	MIPI_DCS_SET_PAGE_ADDRESS	= 0x2B,
+	MIPI_DCS_WRITE_MEMORY_START	= 0x2C,
+	MIPI_DCS_WRITE_LUT		= 0x2D,
+	MIPI_DCS_READ_MEMORY_START	= 0x2E,
+	MIPI_DCS_SET_PARTIAL_AREA	= 0x30,
+	MIPI_DCS_SET_SCROLL_AREA	= 0x33,
+	MIPI_DCS_SET_TEAR_OFF		= 0x34,
+	MIPI_DCS_SET_TEAR_ON		= 0x35,
+	MIPI_DCS_SET_ADDRESS_MODE	= 0x36,
+	MIPI_DCS_SET_SCROLL_START	= 0x37,
+	MIPI_DCS_EXIT_IDLE_MODE		= 0x38,
+	MIPI_DCS_ENTER_IDLE_MODE	= 0x39,
+	MIPI_DCS_SET_PIXEL_FORMAT	= 0x3A,
+	MIPI_DCS_WRITE_MEMORY_CONTINUE	= 0x3C,
+	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
+	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
+	MIPI_DCS_GET_SCANLINE		= 0x45,
+	MIPI_DCS_READ_DDB_START		= 0xA1,
+	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+};
+
+#endif /* __MIPI_DSI_H__ */
diff --git a/src/include/mipi/panel.h b/src/include/mipi/panel.h
index edb6df5fdf..527af7e95c 100644
--- a/src/include/mipi/panel.h
+++ b/src/include/mipi/panel.h
@@ -4,6 +4,7 @@
 #define __MIPI_PANEL_H__
 
 #include <edid.h>
+#include <mipi/dsi.h>
 #include <types.h>
 
 /* Definitions for cmd in panel_init_command */
@@ -30,7 +31,7 @@ struct panel_serializable_data {
 	u8 init[]; /* A packed array of panel_init_command */
 };
 
-typedef cb_err_t (*mipi_cmd_func_t)(enum panel_init_cmd cmd, const u8 *data, u8 len);
+typedef cb_err_t (*mipi_cmd_func_t)(enum mipi_dsi_transaction type, const u8 *data, u8 len);
 
 /* Parse a command array and call cmd_func() for each entry. Delays get handled internally. */
 cb_err_t mipi_panel_parse_init_commands(const void *buf, mipi_cmd_func_t cmd_func);