usbdebug: Move under drivers/usb

Also relocate and split header files, there is some interest
for EHCI debug support without PCI.

Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5129
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>

1 files changed, 0 insertions, 200 deletions

diff --git a/src/include/ehci.h b/src/include/ehci.h
deleted file mode 100644
index f9203522a5..0000000000
--- a/src/include/ehci.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * It was taken from the Linux kernel (include/linux/usb/ehci_def.h).
- *
- * Copyright (C) 2001-2002 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef EHCI_H
-#define EHCI_H
-
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
-	/* these fields are specified as 8 and 16 bit registers,
-	 * but some hosts can't perform 8 or 16 bit PCI accesses.
-	 */
-	u32		hc_capbase;
-#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
-#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
-	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
-#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
-#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
-#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
-#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
-
-	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
-/* EHCI 1.1 addendum */
-#define HCC_32FRAME_PERIODIC_LIST(p)	((p)&(1 << 19))
-#define HCC_PER_PORT_CHANGE_EVENT(p)	((p)&(1 << 18))
-#define HCC_LPM(p)			((p)&(1 << 17))
-#define HCC_HW_PREFETCH(p)		((p)&(1 << 16))
-
-#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
-#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
-	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
-	/* USBCMD: offset 0x00 */
-	u32		command;
-
-/* EHCI 1.1 addendum */
-#define CMD_HIRD	(0xf<<24)	/* host initiated resume duration */
-#define CMD_PPCEE	(1<<15)		/* per port change event enable */
-#define CMD_FSP		(1<<14)		/* fully synchronized prefetch */
-#define CMD_ASPE	(1<<13)		/* async schedule prefetch enable */
-#define CMD_PSPE	(1<<12)		/* periodic schedule prefetch enable */
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
-#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
-#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
-#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
-#define CMD_ASE		(1<<5)		/* async schedule enable */
-#define CMD_PSE		(1<<4)		/* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET	(1<<1)		/* reset HC not bus */
-#define CMD_RUN		(1<<0)		/* start/stop HC */
-
-	/* USBSTS: offset 0x04 */
-	u32		status;
-#define STS_PPCE_MASK	(0xff<<16)	/* Per-Port change event 1-16 */
-#define STS_ASS		(1<<15)		/* Async Schedule Status */
-#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
-#define STS_RECL	(1<<13)		/* Reclamation */
-#define STS_HALT	(1<<12)		/* Not running (any reason) */
-/* some bits reserved */
-	/* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA		(1<<5)		/* Interrupted on async advance */
-#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
-#define STS_FLR		(1<<3)		/* frame list rolled over */
-#define STS_PCD		(1<<2)		/* port change detect */
-#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
-#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
-
-	/* USBINTR: offset 0x08 */
-	u32		intr_enable;
-
-	/* FRINDEX: offset 0x0C */
-	u32		frame_index;	/* current microframe number */
-	/* CTRLDSSEGMENT: offset 0x10 */
-	u32		segment;	/* address bits 63:32 if needed */
-	/* PERIODICLISTBASE: offset 0x14 */
-	u32		frame_list;	/* points to periodic list */
-	/* ASYNCLISTADDR: offset 0x18 */
-	u32		async_next;	/* address of next async queue head */
-
-	u32		reserved[9];
-
-	/* CONFIGFLAG: offset 0x40 */
-	u32		configured_flag;
-#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
-
-	/* PORTSC: offset 0x44 */
-	u32		port_status[0];	/* up to N_PORTS */
-/* EHCI 1.1 addendum */
-#define PORTSC_SUSPEND_STS_ACK 0
-#define PORTSC_SUSPEND_STS_NYET 1
-#define PORTSC_SUSPEND_STS_STALL 2
-#define PORTSC_SUSPEND_STS_ERR 3
-
-#define PORT_DEV_ADDR	(0x7f<<25)		/* device address */
-#define PORT_SSTS	(0x3<<23)		/* suspend status */
-/* 31:23 reserved */
-#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
-#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
-#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_TEST_PKT	(0x4<<16)	/* Port Test Control - packet test */
-#define PORT_LED_OFF	(0<<14)
-#define PORT_LED_AMBER	(1<<14)
-#define PORT_LED_GREEN	(2<<14)
-#define PORT_LED_MASK	(3<<14)
-#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
-#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_LPM	(1<<9)		/* LPM transaction */
-#define PORT_RESET	(1<<8)		/* reset port */
-#define PORT_SUSPEND	(1<<7)		/* suspend port */
-#define PORT_RESUME	(1<<6)		/* resume it */
-#define PORT_OCC	(1<<5)		/* over current change */
-#define PORT_OC		(1<<4)		/* over current active */
-#define PORT_PEC	(1<<3)		/* port enable change */
-#define PORT_PE		(1<<2)		/* port enable */
-#define PORT_CSC	(1<<1)		/* connect status change */
-#define PORT_CONNECT	(1<<0)		/* device connected */
-#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-#define USBMODE		0x68		/* USB Device mode */
-#define USBMODE_SDIS	(1<<3)		/* Stream disable */
-#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
-#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
-#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
-
-/* Moorestown has some non-standard registers, partially due to the fact that
- * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
- * PORTSCx
- */
-#define HOSTPC0		0x84		/* HOSTPC extension */
-#define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
-#define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
-#define USBMODE_EX	0xc8		/* USB Device mode extension */
-#define USBMODE_EX_VBPS	(1<<5)		/* VBus Power Select On */
-#define USBMODE_EX_HC	(3<<0)		/* host controller mode */
-#define TXFILLTUNING	0x24		/* TX FIFO Tuning register */
-#define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
-	u32	control;
-#define DBGP_OWNER	(1<<30)
-#define DBGP_ENABLED	(1<<28)
-#define DBGP_DONE	(1<<16)
-#define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
-#	define DBGP_ERR_BAD	1
-#	define DBGP_ERR_SIGNAL	2
-#define DBGP_ERROR	(1<<6)
-#define DBGP_GO		(1<<5)
-#define DBGP_OUT	(1<<4)
-#define DBGP_LEN(x)	(((x)>>0)&0x0f)
-	u32	pids;
-#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
-	u32	data03;
-	u32	data47;
-	u32	address;
-#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
-} __attribute__ ((packed));
-#endif