diff options
author | Ron Minnich <Ron Minnich> | 2006-07-28 16:06:16 +0000 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2006-07-28 16:06:16 +0000 |
commit | 5e9dc231209c1a293b5a92a9ea78eb07ce0a3086 (patch) | |
tree | 00c90e50087fba91bf5fb2cab050b3191b1daf46 /src/include/cpu/amd/lxdef.h | |
parent | e534daa05ae7057ad615e15fa3021b19f4850fd0 (diff) |
This patch adds support for the AMD LX cpu.
There is one global change to pci_ids.h. The rest are changes for LX. I
ran abuild and it is ok. Not all artec design changes are included as
some of them would adversely affect other mainboards. Indrek will need
to test.
Signed-off-by: Ron Minnich
Signed-off-by: Indrek Kruusa, indrek.kruusa@artecdesign.ee, artec
design.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2350 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/include/cpu/amd/lxdef.h')
-rw-r--r-- | src/include/cpu/amd/lxdef.h | 1136 |
1 files changed, 1136 insertions, 0 deletions
diff --git a/src/include/cpu/amd/lxdef.h b/src/include/cpu/amd/lxdef.h new file mode 100644 index 0000000000..6f04dd9364 --- /dev/null +++ b/src/include/cpu/amd/lxdef.h @@ -0,0 +1,1136 @@ +#ifndef CPU_AMD_LXDEF_H +#define CPU_AMD_LXDEF_H +#define CPU_ID_1_X 0x540 /* Stepping ID 1.x*/ +#define CPU_ID_2_0 0x551 /* Stepping ID 2.0*/ +#define CPU_ID_2_1 0x552 /* Stepping ID 2.1*/ +#define CPU_ID_2_2 0x553 /* Stepping ID 2.2*/ + +#define CPU_REV_1_0 0x011 +#define CPU_REV_1_1 0x012 +#define CPU_REV_1_2 0x013 +#define CPU_REV_1_3 0x014 +#define CPU_REV_2_0 0x020 +#define CPU_REV_2_1 0x021 +#define CPU_REV_2_2 0x022 +#define CPU_REV_3_0 0x030 +/* GeodeLink Control Processor Registers, GLIU1, Port 3 */ +#define GLCP_CLK_DIS_DELAY 0x4c000008 +#define GLCP_PMCLKDISABLE 0x4c000009 +#define GLCP_CHIP_REVID 0x4c000017 + +/* GLCP_SYS_RSTPLL, Upper 32 bits */ +#define GLCP_SYS_RSTPLL_MDIV_SHIFT 9 +#define GLCP_SYS_RSTPLL_VDIV_SHIFT 6 +#define GLCP_SYS_RSTPLL_FBDIV_SHIFT 0 + +/* GLCP_SYS_RSTPLL, Lower 32 bits */ +#define GLCP_SYS_RSTPLL_SWFLAGS_SHIFT 26 +#define GLCP_SYS_RSTPLL_SWFLAGS_MASK (0x3f << 26) + +#define GLCP_SYS_RSTPLL_LOCKWAIT 24 +#define GLCP_SYS_RSTPLL_HOLDCOUNT 16 +#define GLCP_SYS_RSTPLL_BYPASS 15 +#define GLCP_SYS_RSTPLL_PD 14 +#define GLCP_SYS_RSTPLL_RESETPLL 13 +#define GLCP_SYS_RSTPLL_DDRMODE 10 +#define GLCP_SYS_RSTPLL_VA_SEMI_SYNC_MODE 9 +#define GLCP_SYS_RSTPLL_PCI_SEMI_SYNC_MODE 8 +#define GLCP_SYS_RSTPLL_CHIP_RESET 0 + +/* MSR routing as follows*/ +/* MSB = 1 means not for CPU*/ +/* next 3 bits 1st port*/ +/* next3 bits next port if through an GLIU*/ +/* etc...*/ + +/*Redcloud as follows.*/ +/* GLIU0*/ +/* port0 - GLIU0*/ +/* port1 - MC*/ +/* port2 - GLIU1*/ +/* port3 - CPU*/ +/* port4 - VG*/ +/* port5 - GP*/ +/* port6 - DF*/ + +/* GLIU1*/ +/* port1 - GLIU0*/ +/* port3 - GLCP*/ +/* port4 - PCI*/ +/* port5 - FG*/ + + +/* start GX3 def, differences are marked with GX3 comment */ + +#define GL0_GLIU0 0 +#define GL0_MC 1 +#define GL0_GLIU1 2 +#define GL0_CPU 3 +#define GL0_VG 4 +#define GL0_GP 5 +//#define GL0_DF 6 //GX3 no such thing as VP port + +#define GL1_GLIU0 1 +//GX3 VP port +#define GL1_DF 2 +#define GL1_GLCP 3 +#define GL1_PCI 4 +#define GL1_VIP 5 +#define GL1_AES 6 + +#define MSR_GLIU0 (GL0_GLIU0 << 29) + (1 << 28) /* 1000xxxx - To get on GeodeLink one bit has to be set */ +#define MSR_MC (GL0_MC << 29) /* 2000xxxx */ +#define MSR_GLIU1 (GL0_GLIU1 << 29) /* 4000xxxx */ +#define MSR_CPU (GL0_CPU << 32) /* 0000xxxx - this is not used for BIOS */ //GX3 +#define MSR_VG (GL0_VG << 29) /* 8000xxxx */ +#define MSR_GP (GL0_GP << 29) /* A000xxxx */ +//#define MSR_DF (GL0_DF << 29) /* C000xxxx */ //GX3 no such thing + +#define MSR_GLCP (GL1_GLCP << 26) + MSR_GLIU1 /* 4C00xxxx */ +#define MSR_PCI (GL1_PCI << 26) + MSR_GLIU1 /* 5000xxxx */ +//#define MSR_FG (GL1_FG << 26) + MSR_GLIU1 /* 5400xxxx */ //GX3: no such thing +#define MSR_VIP ((GL1_VIP << 26) + MSR_GLIU1) /* 5400xxxx */ +#define MSR_AES ((GL1_AES << 26) + MSR_GLIU1) /* 5800xxxx */ +/* South Bridge*/ +#define SB_PORT 2 /* port of the SouthBridge */ +#define MSR_SB ((SB_PORT << 23) + MSR_PCI) /* 5100xxxx - address to the SouthBridge*/ +#define SB_SHIFT 20 /* 29 -> 26 -> 23 -> 20...... When making a SB address uses this shift.*/ + + +/**/ +/*GeodeLink Interface Unit 0 (GLIU0) port0*/ +/**/ + +#define GLIU0_GLD_MSR_CAP (MSR_GLIU0 + 0x2000) +#define GLIU0_GLD_MSR_PM (MSR_GLIU0 + 0x2004) + +#define GLIU0_DESC_BASE (MSR_GLIU0 + 0x20) +#define GLIU0_CAP (MSR_GLIU0 + 0x86) +#define GLIU0_GLD_MSR_COH (MSR_GLIU0 + 0x80) + + +/**/ +/* Memory Controller GLIU0 port 1*/ +/**/ +#define MC_GLD_MSR_CAP (MSR_MC + 0x2000) +#define MC_GLD_MSR_PM (MSR_MC + 0x2004) + +#define MC_CF07_DATA (MSR_MC + 0x18) + +#define CF07_UPPER_D1_SZ_SHIFT 28 +#define CF07_UPPER_D1_MB_SHIFT 24 +#define CF07_UPPER_D1_CB_SHIFT 20 +#define CF07_UPPER_D1_PSZ_SHIFT 16 +#define CF07_UPPER_D0_SZ_SHIFT 12 +#define CF07_UPPER_D0_MB_SHIFT 8 +#define CF07_UPPER_D0_CB_SHIFT 4 +#define CF07_UPPER_D0_PSZ_SHIFT 0 + +#define CF07_LOWER_REF_INT_SHIFT 8 +#define CF07_LOWER_LOAD_MODE_DDR_SET (1 << 28) +#define CF07_LOWER_LOAD_MODE_DLL_RESET (1 << 27) +#define CF07_LOWER_EMR_QFC_SET (1 << 26) +#define CF07_LOWER_EMR_DRV_SET (1 << 25) +#define CF07_LOWER_REF_TEST_SET (1 << 3) +#define CF07_LOWER_PROG_DRAM_SET (1 << 0) + + +#define MC_CF8F_DATA (MSR_MC + 0x19) + +#define CF8F_UPPER_XOR_BS_SHIFT 19 +#define CF8F_UPPER_XOR_MB0_SHIFT 18 +#define CF8F_UPPER_XOR_BA1_SHIFT 17 +#define CF8F_UPPER_XOR_BA0_SHIFT 16 +#define CF8F_UPPER_REORDER_DIS_SET (1 << 8) +#define CF8F_UPPER_REG_DIMM_SHIFT 4 +#define CF8F_LOWER_CAS_LAT_SHIFT 28 +#define CF8F_LOWER_REF2ACT_SHIFT 24 +#define CF8F_LOWER_ACT2PRE_SHIFT 20 +#define CF8F_LOWER_PRE2ACT_SHIFT 16 +#define CF8F_LOWER_ACT2CMD_SHIFT 12 +#define CF8F_LOWER_ACT2ACT_SHIFT 8 +#define CF8F_UPPER_32BIT_SET (1 << 5) +#define CF8F_UPPER_HOI_LOI_SET (1 << 1) + +#define MC_CF1017_DATA (MSR_MC + 0x1A) + +#define CF1017_LOWER_PM1_UP_DLY_SET (1 << 8) +#define CF1017_LOWER_WR2DAT_SHIFT 0 + +#define MC_CFCLK_DBUG (MSR_MC + 0x1D) + +#define CFCLK_UPPER_MTST_B2B_DIS_SET (1 << 2) +#define CFCLK_UPPER_MTST_DQS_EN_SET (1 << 1) +#define CFCLK_UPPER_MTEST_EN_SET (1 << 0) + +#define CFCLK_LOWER_MASK_CKE_SET1 (1 << 9) +#define CFCLK_LOWER_MASK_CKE_SET0 (1 << 8) +#define CFCLK_LOWER_SDCLK_SET (0x0F << 0) + +#define MC_CF_RDSYNC (MSR_MC + 0x1F) + + +/**/ +/* GLIU1 GLIU0 port2*/ +/**/ +#define GLIU1_GLD_MSR_CAP (MSR_GLIU1 + 0x2000) +#define GLIU1_GLD_MSR_PM (MSR_GLIU1 + 0x2004) + +#define GLIU1_GLD_MSR_COH (MSR_GLIU1 + 0x80) + + +/**/ +/* CPU ; does not need routing instructions since we are executing there.*/ +/**/ +#define CPU_GLD_MSR_CAP 0x2000 +#define CPU_GLD_MSR_CONFIG 0x2001 +#define CPU_GLD_MSR_PM 0x2004 + +#define CPU_GLD_MSR_DIAG 0x2005 +#define DIAG_SEL1_MODE_SHIFT 16 +#define DIAG_SEL1_SET (1 << 31) +#define DIAG_SEL0__MODE_SHIFT 0 +#define DIAG_SET0_SET (1 << 15) + +#define CPU_PF_BTB_CONF 0x1100 +#define BTB_ENABLE_SET (1 << 0) +#define RETURN_STACK_ENABLE_SET (1 << 4) +#define CPU_PF_BTBRMA_BIST 0x110C + +#define CPU_XC_CONFIG 0x1210 +#define XC_CONFIG_SUSP_ON_HLT (1 << 0) +#define CPU_ID_CONFIG 0x1250 +#define ID_CONFIG_SERIAL_SET (1 << 0) + +#define CPU_AC_MSR 0x1301 +#define CPU_EX_BIST 0x1428 + +/*IM*/ +#define CPU_IM_CONFIG 0x1700 +#define IM_CONFIG_LOWER_ICD_SET (1 << 8) +#define IM_CONFIG_LOWER_QWT_SET (1 << 20) +#define CPU_IC_INDEX 0x1710 +#define CPU_IC_DATA 0x1711 +#define CPU_IC_TAG 0x1712 +#define CPU_IC_TAG_I 0x1713 +#define CPU_ITB_INDEX 0x1720 +#define CPU_ITB_LRU 0x1721 +#define CPU_ITB_ENTRY 0x1722 +#define CPU_ITB_ENTRY_I 0x1723 +#define CPU_IM_BIST_TAG 0x1730 +#define CPU_IM_BIST_DATA 0x1731 + + +/* various CPU MSRs */ +#define CPU_DM_CONFIG0 0x1800 +#define DM_CONFIG0_UPPER_WSREQ_SHIFT 12 +#define DM_CONFIG0_LOWER_DCDIS_SET (1<<8) +#define DM_CONFIG0_LOWER_WBINVD_SET (1<<5) +#define DM_CONFIG0_LOWER_MISSER_SET (1<<1) +/* configuration MSRs */ +#define CPU_RCONF_DEFAULT 0x1808 +#define RCONF_DEFAULT_UPPER_ROMRC_SHIFT 24 +#define RCONF_DEFAULT_UPPER_ROMBASE_SHIFT 4 +#define RCONF_DEFAULT_UPPER_DEVRC_HI_SHIFT 0 +#define RCONF_DEFAULT_LOWER_DEVRC_LOW_SHIFT 28 +#define RCONF_DEFAULT_LOWER_SYSTOP_SHIFT 8 +#define RCONF_DEFAULT_LOWER_SYSRC_SHIFT 0 + +#define CPU_RCONF_BYPASS 0x180A +#define CPU_RCONF_A0_BF 0x180B +#define CPU_RCONF_C0_DF 0x180C +#define CPU_RCONF_E0_FF 0x180D + +#define CPU_RCONF_SMM 0x180E +#define RCONF_SMM_UPPER_SMMTOP_SHIFT 12 +#define RCONF_SMM_UPPER_RCSMM_SHIFT 0 +#define RCONF_SMM_LOWER_SMMBASE_SHIFT 12 +#define RCONF_SMM_LOWER_RCNORM_SHIFT 0 +#define RCONF_SMM_LOWER_EN_SET (1<<8) + +#define CPU_RCONF_DMM 0x180F +#define RCONF_DMM_UPPER_DMMTOP_SHIFT 12 +#define RCONF_DMM_UPPER_RCDMM_SHIFT 0 +#define RCONF_DMM_LOWER_DMMBASE_SHIFT 12 +#define RCONF_DMM_LOWER_RCNORM_SHIFT 0 +#define RCONF_DMM_LOWER_EN_SET (1<<8) + +#define CPU_RCONF0 0x1810 +#define CPU_RCONF1 0x1811 +#define CPU_RCONF2 0x1812 +#define CPU_RCONF3 0x1813 +#define CPU_RCONF4 0x1814 +#define CPU_RCONF5 0x1815 +#define CPU_RCONF6 0x1816 +#define CPU_RCONF7 0x1817 +#define CPU_CR1_MSR 0x1881 +#define CPU_CR2_MSR 0x1882 +#define CPU_CR3_MSR 0x1883 +#define CPU_CR4_MSR 0x1884 +#define CPU_DC_INDEX 0x1890 +#define CPU_DC_DATA 0x1891 +#define CPU_DC_TAG 0x1892 +#define CPU_DC_TAG_I 0x1893 +#define CPU_SNOOP 0x1894 +#define CPU_DTB_INDEX 0x1898 +#define CPU_DTB_LRU 0x1899 +#define CPU_DTB_ENTRY 0x189A +#define CPU_DTB_ENTRY_I 0x189B +#define CPU_L2TB_INDEX 0x189C +#define CPU_L2TB_LRU 0x189D +#define CPU_L2TB_ENTRY 0x189E +#define CPU_L2TB_ENTRY_I 0x189F +#define CPU_DM_BIST 0x18C0 + /* SMM*/ +#define CPU_AC_SMM_CTL 0x1301 +#define SMM_NMI_EN_SET (1<<0) +#define SMM_SUSP_EN_SET (1<<1) +#define NEST_SMI_EN_SET (1<<2) +#define SMM_INST_EN_SET (1<<3) +#define INTL_SMI_EN_SET (1<<4) +#define EXTL_SMI_EN_SET (1<<5) + +#define CPU_FPU_MSR_MODE 0x1A00 +#define FPU_IE_SET (1<<0) + +#define CPU_FP_UROM_BIST 0x1A03 + +#define CPU_BC_CONF_0 0x1900 +#define TSC_SUSP_SET (1<<5) +#define SUSP_EN_SET (1<<12) + + /**/ + /* VG GLIU0 port4*/ + /**/ + +#define VG_GLD_MSR_CAP (MSR_VG + 0x2000) +#define VG_GLD_MSR_CONFIG (MSR_VG + 0x2001) +#define VG_GLD_MSR_PM (MSR_VG + 0x2004) + +#define GP_GLD_MSR_CAP (MSR_GP + 0x2000) +#define GP_GLD_MSR_CONFIG (MSR_GP + 0x2001) +#define GP_GLD_MSR_PM (MSR_GP + 0x2004) + + + +/**/ +/* DF GLIU0 port6*/ +/**/ +/* +#define DF_GLD_MSR_CAP (MSR_DF + 0x2000) +#define DF_GLD_MSR_MASTER_CONF (MSR_DF + 0x2001) +#define DF_LOWER_LCD_SHIFT 6 +#define DF_GLD_MSR_PM (MSR_DF + 0x2004) + +*/ + +/**/ +/* GeodeLink Control Processor GLIU1 port3*/ +/**/ +#define GLCP_GLD_MSR_CAP (MSR_GLCP + 0x2000) +#define GLCP_GLD_MSR_CONF (MSR_GLCP + 0x2001) +#define GLCP_GLD_MSR_PM (MSR_GLCP + 0x2004) + +#define GLCP_DELAY_CONTROLS (MSR_GLCP + 0x0F) + +#define GLCP_SYS_RSTPLL (MSR_GLCP +0x14 /* R/W*/) +#define RSTPLL_UPPER_MDIV_SHIFT 9 +#define RSTPLL_UPPER_VDIV_SHIFT 6 +#define RSTPLL_UPPER_FBDIV_SHIFT 0 + +#define RSTPLL_LOWER_SWFLAGS_SHIFT 26 +#define RSTPLL_LOWER_SWFLAGS_MASK (0x3F<<RSTPLL_LOWER_SWFLAGS_SHIFT) + +#define RSTPPL_LOWER_HOLD_COUNT_SHIFT 16 +#define RSTPPL_LOWER_BYPASS_SHIFT 15 +#define RSTPPL_LOWER_TST_SHIFT 11 +#define RSTPPL_LOWER_SDRMODE_SHIFT 10 +#define RSTPPL_LOWER_BOOTSTRAP_SHIFT 4 + +#define RSTPPL_LOWER_LOCK_SET (1<<25) +#define RSTPPL_LOWER_LOCKWAIT_SET (1<<24) +#define RSTPPL_LOWER_BYPASS_SET (1<<15) +#define RSTPPL_LOWER_PD_SET (1<<14) +#define RSTPPL_LOWER_PLL_RESET_SET (1<<13) +#define RSTPPL_LOWER_SDRMODE_SET (1<<10) +#define RSTPPL_LOWER_CPU_SEMI_SYNC_SET (1<<9) +#define RSTPPL_LOWER_PCI_SEMI_SYNC_SET (1<<8) +#define RSTPPL_LOWER_CHIP_RESET_SET (1<<0) + +#define GLCP_DOTPLL (MSR_GLCP + 0x15 /* R/W*/) +#define DOTPPL_LOWER_PD_SET (1<<14) + + +/**/ +/* GLIU1 port 4*/ +/**/ +#define GLPCI_GLD_MSR_CAP (MSR_PCI + 0x2000) +#define GLPCI_GLD_MSR_CONFIG (MSR_PCI + 0x2001) +#define GLPCI_GLD_MSR_PM (MSR_PCI + 0x2004) + +#define GLPCI_CTRL (MSR_PCI + 0x2010) +#define GLPCI_CTRL_UPPER_FTH_SHIFT 28 +#define GLPCI_CTRL_UPPER_RTH_SHIFT 24 +#define GLPCI_CTRL_UPPER_SBRTH_SHIFT 20 +#define GLPCI_CTRL_UPPER_DTL_SHIFT 14 +#define GLPCI_CTRL_UPPER_WTO_SHIFT 11 +#define GLPCI_CTRL_UPPER_LAT_SHIFT 3 +#define GLPCI_CTRL_UPPER_ILTO_SHIFT 8 +#define GLPCI_CTRL_LOWER_IRFT_SHIFT 18 +#define GLPCI_CTRL_LOWER_IRFC_SHIFT 16 +#define GLPCI_CTRL_LOWER_ER_SET (1<<11) +#define GLPCI_CTRL_LOWER_LDE_SET (1<<9) +#define GLPCI_CTRL_LOWER_OWC_SET (1<<4) +#define GLPCI_CTRL_LOWER_IWC_SET (1<<3) +#define GLPCI_CTRL_LOWER_PCD_SET (1<<2) +#define GLPCI_CTRL_LOWER_ME_SET (1<<0) + +#define GLPCI_ARB (MSR_PCI + 0x2011) +#define GLPCI_ARB_UPPER_BM1_SET (1<<17) +#define GLPCI_ARB_UPPER_BM0_SET (1<<16) +#define GLPCI_ARB_UPPER_CPRE_SET (1<<15) +#define GLPCI_ARB_UPPER_PRE2_SET (1<<10) +#define GLPCI_ARB_UPPER_PRE1_SET (1<<9) +#define GLPCI_ARB_UPPER_PRE0_SET (1<<8) +#define GLPCI_ARB_UPPER_CRME_SET (1<<7) +#define GLPCI_ARB_UPPER_RME2_SET (1<<2) +#define GLPCI_ARB_UPPER_RME1_SET (1<<1) +#define GLPCI_ARB_UPPER_RME0_SET (1<<0) +#define GLPCI_ARB_LOWER_PRCM_SHIFT 24 +#define GLPCI_ARB_LOWER_FPVEC_SHIFT 16 +#define GLPCI_ARB_LOWER_RMT_SHIFT 6 +#define GLPCI_ARB_LOWER_IIE_SET (1<<8) +#define GLPCI_ARB_LOWER_PARK_SET (1<<0) + +#define GLPCI_REN (MSR_PCI + 0x2014) +#define GLPCI_A0_BF (MSR_PCI + 0x2015) +#define GLPCI_C0_DF (MSR_PCI + 0x2016) +#define GLPCI_E0_FF (MSR_PCI + 0x2017) +#define GLPCI_RC0 (MSR_PCI + 0x2018) +#define GLPCI_RC1 (MSR_PCI + 0x2019) +#define GLPCI_RC2 (MSR_PCI + 0x201A) +#define GLPCI_RC3 (MSR_PCI + 0x201B) +#define GLPCI_RC4 (MSR_PCI + 0x201C) +#define GLPCI_RC_UPPER_TOP_SHIFT 12 +#define GLPCI_RC_LOWER_BASE_SHIFT 12 +#define GLPCI_RC_LOWER_EN_SET (1<<8) +#define GLPCI_RC_LOWER_PF_SET (1<<5) +#define GLPCI_RC_LOWER_WC_SET (1<<4) +#define GLPCI_RC_LOWER_WP_SET (1<<2) +#define GLPCI_RC_LOWER_CD_SET (1<<0) +#define GLPCI_EXT_MSR (MSR_PCI + 0x201E) +#define GLPCI_SPARE (MSR_PCI + 0x201F) +#define GLPCI_SPARE_LOWER_AILTO_SET (1<<6) +#define GLPCI_SPARE_LOWER_PPD_SET (1<<5) +#define GLPCI_SPARE_LOWER_PPC_SET (1<<4) +#define GLPCI_SPARE_LOWER_MPC_SET (1<<3) +#define GLPCI_SPARE_LOWER_MME_SET (1<<2) +#define GLPCI_SPARE_LOWER_NSE_SET (1<<1) +#define GLPCI_SPARE_LOWER_SUPO_SET (1<<0) + + +/**/ +/* FooGlue GLIU1 port 5*/ +/**/ +/* GX3 not needed? +#define FG_GLD_MSR_CAP (MSR_FG + 0x2000) +#define FG_GLD_MSR_PM (MSR_FG + 0x2004) +*/ +/* VIP GLIU1 port 5*/ +/* */ +#define VIP_GLD_MSR_CAP (MSR_VIP + 0x2000) +#define VIP_GLD_MSR_CONFIG (MSR_VIP + 0x2001) +#define VIP_GLD_MSR_PM (MSR_VIP + 0x2004) +#define VIP_BIST (MSR_VIP + 0x2005) +/* */ +/* AES GLIU1 port 6*/ +/* */ +#define AES_GLD_MSR_CAP (MSR_AES + 0x2000) +#define AES_GLD_MSR_CONFIG (MSR_AES + 0x2001) +#define AES_GLD_MSR_PM (MSR_AES + 0x2004) +#define AES_CONTROL (MSR_AES + 0x2006) +/* more fun stuff */ +#define BM 1 /* Base Mask - map power of 2 size aligned region*/ +#define BMO 2 /* BM with an offset*/ +#define R 3 /* Range - 4k range minimum*/ +#define RO 4 /* R with offset*/ +#define SC 5 /* Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R*/ +#define BMIO 6 /* Base Mask IO*/ +#define SCIO 7 /* Swiss 0xCeese IO*/ +#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independant of CPU*/ +#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independant of CPU*/ +#define BMO_SMM 10 /* Specail marker for SMM*/ +#define BM_SMM 11 /* Specail marker for SMM*/ +#define BMO_DMM 12 /* Specail marker for DMM*/ +#define BM_DMM 13 /* Specail marker for DMM*/ +#define RO_FB 14 /* special for Frame buffer.*/ +#define R_FB 15 /* special for FB.*/ +#define OTHER 0x0FE /* Special marker for other*/ +#define GL_END 0x0FF /* end*/ + +#define MSR_GL0 (GL1_GLIU0 << 29) + +/* Set up desc addresses from 20 - 3f*/ +/* This is chip specific!*/ +#define MSR_GLIU0_BASE1 (MSR_GLIU0 + 0x20) /* BM*/ +#define MSR_GLIU0_BASE2 (MSR_GLIU0 + 0x21) /* BM*/ +#define MSR_GLIU0_SHADOW (MSR_GLIU0 + 0x2C) /* SCO should only be SC*/ +#define MSR_GLIU0_SYSMEM (MSR_GLIU0 + 0x28) /* RO should only be R*/ +#define MSR_GLIU0_SMM (MSR_GLIU0 + 0x26) /* BMO*/ +#define MSR_GLIU0_DMM (MSR_GLIU0 + 0x27) /* BMO*/ + +#define MSR_GLIU1_BASE1 (MSR_GLIU1 + 0x20) /* BM*/ +#define MSR_GLIU1_BASE2 (MSR_GLIU1 + 0x21) /* BM*/ +#define MSR_GLIU1_SHADOW (MSR_GLIU1 + 0x2D) /* SCO should only be SC*/ +#define MSR_GLIU1_SYSMEM (MSR_GLIU1 + 0x29) /* RO should only be R*/ +#define MSR_GLIU1_SMM (MSR_GLIU1 + 0x23) /* BM*/ +#define MSR_GLIU1_DMM (MSR_GLIU1 + 0x24) /* BM*/ +#define MSR_GLIU1_FPU_TRAP (MSR_GLIU1 + 0x0E3) /* FooGlue F0 for FPU*/ + +/* definitions that are "once you are mostly up, start VSA" type things */ +#define SMM_OFFSET (0x40400000) +#define SMM_SIZE (128) /* changed SMM_SIZE from 256 KB to 128 KB */ +#define DMM_OFFSET (0x0C0000000) +#define DMM_SIZE (128) +#define FB_OFFSET (0x41000000) +#define PCI_MEM_TOP (0x0EFFFFFFF) // Top of PCI mem allocation region +#define PCI_IO_TOP (0x0EFFF) // Top of PCI I/O allocation region +#define END_OPTIONROM_SPACE (0x0DFFF) // E0000 is reserved for SystemROMs. + + +#define CS5535_IDSEL (0x02000000) // IDSEL = AD25, device #15 +#define CHIPSET_DEV_NUM (15) +#define IDSEL_BASE (11) // bit 11 = device 1 + + +/* standard AMD post definitions -- might as well use them. */ +#define POST_Output_Port (0x080) /* port to write post codes to*/ + +#define POST_preSioInit (0x000) /* geode.asm*/ +#define POST_clockInit (0x001) /* geode.asm*/ +#define POST_CPURegInit (0x002) /* geode.asm*/ +#define POST_UNREAL (0x003) /* geode.asm*/ +#define POST_CPUMemRegInit (0x004) /* geode.asm*/ +#define POST_CPUTest (0x005) /* geode.asm*/ +#define POST_memSetup (0x006) /* geode.asm*/ +#define POST_memSetUpStack (0x007) /* geode.asm*/ +#define POST_memTest (0x008) /* geode.asm*/ +#define POST_shadowRom (0x009) /* geode.asm*/ +#define POST_memRAMoptimize (0x00A) /* geode.asm*/ +#define POST_cacheInit (0x00B) /* geode.asm*/ +#define POST_northBridgeInit (0x00C) /* geode.asm*/ +#define POST_chipsetInit (0x00D) /* geode.asm*/ +#define POST_sioTest (0x00E) /* geode.asm*/ +#define POST_pcATjunk (0x00F) /* geode.asm*/ + + +#define POST_intTable (0x010) /* geode.asm*/ +#define POST_memInfo (0x011) /* geode.asm*/ +#define POST_romCopy (0x012) /* geode.asm*/ +#define POST_PLLCheck (0x013) /* geode.asm*/ +#define POST_keyboardInit (0x014) /* geode.asm*/ +#define POST_cpuCacheOff (0x015) /* geode.asm*/ +#define POST_BDAInit (0x016) /* geode.asm*/ +#define POST_pciScan (0x017) /* geode.asm*/ +#define POST_optionRomInit (0x018) /* geode.asm*/ +#define POST_ResetLimits (0x019) /* geode.asm*/ +#define POST_summary_screen (0x01A) /* geode.asm*/ +#define POST_Boot (0x01B) /* geode.asm*/ +#define POST_SystemPreInit (0x01C) /* geode.asm*/ +#define POST_ClearRebootFlag (0x01D) /* geode.asm*/ +#define POST_GLIUInit (0x01E) /* geode.asm*/ +#define POST_BootFailed (0x01F) /* geode.asm*/ + + +#define POST_CPU_ID (0x020) /* cpucpuid.asm*/ +#define POST_COUNTERBROKEN (0x021) /* pllinit.asm*/ +#define POST_DIFF_DIMMS (0x022) /* pllinit.asm*/ +#define POST_WIGGLE_MEM_LINES (0x023) /* pllinit.asm*/ +#define POST_NO_GLIU_DESC (0x024) /* pllinit.asm*/ +#define POST_CPU_LCD_CHECK (0x025) /* pllinit.asm*/ +#define POST_CPU_LCD_PASS (0x026) /* pllinit.asm*/ +#define POST_CPU_LCD_FAIL (0x027) /* pllinit.asm*/ +#define POST_CPU_STEPPING (0x028) /* cpucpuid.asm*/ +#define POST_CPU_DM_BIST_FAILURE (0x029) /* gx2reg.asm*/ +#define POST_CPU_FLAGS (0x02A) /* cpucpuid.asm*/ +#define POST_CHIPSET_ID (0x02b) /* chipset.asm*/ +#define POST_CHIPSET_ID_PASS (0x02c) /* chipset.asm*/ +#define POST_CHIPSET_ID_FAIL (0x02d) /* chipset.asm*/ +#define POST_CPU_ID_GOOD (0x02E) /* cpucpuid.asm*/ +#define POST_CPU_ID_FAIL (0x02F) /* cpucpuid.asm*/ + + + +/* PCI config*/ +#define P80_PCICFG (0x030) /* pcispace.asm*/ + + +/* PCI io*/ +#define P80_PCIIO (0x040) /* pcispace.asm*/ + + +/* PCI memory*/ +#define P80_PCIMEM (0x050) /* pcispace.asm*/ + + +/* SIO*/ +#define P80_SIO (0x060) /* *sio.asm*/ + +/* Memory Setp*/ +#define P80_MEM_SETUP (0x070) /* docboot meminit*/ +#define POST_MEM_SETUP (0x070) /* memsize.asm*/ +#define ERROR_32BIT_DIMMS (0x071) /* memsize.asm*/ +#define POST_MEM_SETUP2 (0x072) /* memsize.asm*/ +#define POST_MEM_SETUP3 (0x073) /* memsize.asm*/ +#define POST_MEM_SETUP4 (0x074) /* memsize.asm*/ +#define POST_MEM_SETUP5 (0x075) /* memsize.asm*/ +#define POST_MEM_ENABLE (0x076) /* memsize.asm*/ +#define ERROR_NO_DIMMS (0x077) /* memsize.asm*/ +#define ERROR_DIFF_DIMMS (0x078) /* memsize.asm*/ +#define ERROR_BAD_LATENCY (0x079) /* memsize.asm*/ +#define ERROR_SET_PAGE (0x07a) /* memsize.asm*/ +#define ERROR_DENSITY_DIMM (0x07b) /* memsize.asm*/ +#define ERROR_UNSUPPORTED_DIMM (0x07c) /* memsize.asm*/ +#define ERROR_BANK_SET (0x07d) /* memsize.asm*/ +#define POST_MEM_SETUP_GOOD (0x07E) /* memsize.asm*/ +#define POST_MEM_SETUP_FAIL (0x07F) /* memsize.asm*/ + + +#define POST_UserPreInit (0x080) /* geode.asm*/ +#define POST_UserPostInit (0x081) /* geode.asm*/ +#define POST_Equipment_check (0x082) /* geode.asm*/ +#define POST_InitNVRAMBX (0x083) /* geode.asm*/ +#define POST_NoPIRTable (0x084) /* pci.asm*/ +#define POST_ChipsetFingerPrintPass (0x085) /* prechipsetinit*/ +#define POST_ChipsetFingerPrintFail (0x086) /* prechipsetinit*/ +#define POST_CPU_IM_TAG_BIST_FAILURE (0x087) /* gx2reg.asm*/ +#define POST_CPU_IM_DATA_BIST_FAILURE (0x088) /* gx2reg.asm*/ +#define POST_CPU_FPU_BIST_FAILURE (0x089) /* gx2reg.asm*/ +#define POST_CPU_BTB_BIST_FAILURE (0x08a) /* gx2reg.asm*/ +#define POST_CPU_EX_BIST_FAILURE (0x08b) /* gx2reg.asm*/ +#define POST_Chipset_PI_Test_Fail (0x08c) /* prechipsetinit*/ +#define POST_Chipset_SMBus_SDA_Test_Fail (0x08d) /* prechipsetinit*/ +#define POST_BIT_CLK_Fail (0x08e) /* Hawk geode.asm override*/ + + +#define POST_STACK_SETUP (0x090) /* memstack.asm*/ +#define POST_CPU_PF_BIST_FAILURE (0x091) /* gx2reg.asm*/ +#define POST_CPU_L2_BIST_FAILURE (0x092) /* gx2reg.asm*/ +#define POST_CPU_GLCP_BIST_FAILURE (0x093) /* gx2reg.asm*/ +#define POST_CPU_DF_BIST_FAILURE (0x094) /* gx2reg.asm*/ +#define POST_CPU_VG_BIST_FAILURE (0x095) /* gx2reg.asm*/ +#define POST_CPU_VIP_BIST_FAILURE (0x096) /* gx2reg.asm*/ +#define POST_STACK_SETUP_PASS (0x09E) /* memstack.asm*/ +#define POST_STACK_SETUP_FAIL (0x09F) /* memstack.asm*/ + + +#define POST_PLL_INIT (0x0A0) /* pllinit.asm*/ +#define POST_PLL_MANUAL (0x0A1) /* pllinit.asm*/ +#define POST_PLL_STRAP (0x0A2) /* pllinit.asm*/ +#define POST_PLL_RESET_FAIL (0x0A3) /* pllinit.asm*/ +#define POST_PLL_PCI_FAIL (0x0A4) /* pllinit.asm*/ +#define POST_PLL_MEM_FAIL (0x0A5) /* pllinit.asm*/ +#define POST_PLL_CPU_VER_FAIL (0x0A6) /* pllinit.asm*/ + + +#define POST_MEM_TESTMEM (0x0B0) /* memtest.asm*/ +#define POST_MEM_TESTMEM1 (0x0B1) /* memtest.asm*/ +#define POST_MEM_TESTMEM2 (0x0B2) /* memtest.asm*/ +#define POST_MEM_TESTMEM3 (0x0B3) /* memtest.asm*/ +#define POST_MEM_TESTMEM4 (0x0B4) /* memtest.asm*/ +#define POST_MEM_TESTMEM_PASS (0x0BE) /* memtest.asm*/ +#define POST_MEM_TESTMEM_FAIL (0x0BF) /* memtest.asm*/ + + +#define POST_SECUROM_SECBOOT_START (0x0C0) /* secstart.asm*/ +#define POST_SECUROM_BOOTSRCSETUP (0x0C1) /* secstart.asm*/ +#define POST_SECUROM_REMAP_FAIL (0x0C2) /* secstart.asm*/ +#define POST_SECUROM_BOOTSRCSETUP_FAIL (0x0C3) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUP (0x0C4) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUP_FAIL (0x0C5) /* secstart.asm*/ +#define POST_SECUROM_ICACHESETUP (0x0C6) /* secstart.asm*/ +#define POST_SECUROM_DESCRIPTORSETUP (0x0C7) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUPBIOS (0x0C8) /* secstart.asm*/ +#define POST_SECUROM_PLATFORMSETUP (0x0C9) /* secstart.asm*/ +#define POST_SECUROM_SIGCHECKBIOS (0x0CA) /* secstart.asm*/ +#define POST_SECUROM_ICACHESETUPBIOS (0x0CB) /* secstart.asm*/ +#define POST_SECUROM_PASS (0x0CC) /* secstart.asm*/ +#define POST_SECUROM_FAIL (0x0CD) /* secstart.asm*/ + +#define POST_RCONFInitError (0x0CE) /* cache.asm*/ +#define POST_CacheInitError (0x0CF) /* cache.asm*/ + + +#define POST_ROM_PREUNCOMPRESS (0x0D0) /* rominit.asm*/ +#define POST_ROM_UNCOMPRESS (0x0D1) /* rominit.asm*/ +#define POST_ROM_SMM_INIT (0x0D2) /* rominit.asm*/ +#define POST_ROM_VID_BIOS (0x0D3) /* rominit.asm*/ +#define POST_ROM_LCDINIT (0x0D4) /* rominit.asm*/ +#define POST_ROM_SPLASH (0x0D5) /* rominit.asm*/ +#define POST_ROM_HDDINIT (0x0D6) /* rominit.asm*/ +#define POST_ROM_SYS_INIT (0x0D7) /* rominit.asm*/ +#define POST_ROM_DMM_INIT (0x0D8) /* rominit.asm*/ +#define POST_ROM_TVINIT (0x0D9) /* rominit.asm*/ +#define POST_ROM_POSTUNCOMPRESS (0x0DE) + + +#define P80_CHIPSET_INIT (0x0E0) /* chipset.asm*/ +#define POST_PreChipsetInit (0x0E1) /* geode.asm*/ +#define POST_LateChipsetInit (0x0E2) /* geode.asm*/ +#define POST_NORTHB_INIT (0x0E8) /* northb.asm*/ + + +#define POST_INTR_SEG_JUMP (0x0F0) /* vector.asm*/ + + +/* I don't mind if somebody decides this needs to be in a seperate file. I don't see much point + * in it, either. + * RGM + */ +#define Cx5535_ID ( 0x002A100B) +#define Cx5536_ID ( 0x208F1022) + +/* Cs5535 as follows. */ +/* SB_GLIU*/ +/* port0 - GLIU*/ +/* port1 - GLPCI*/ +/* port2 - USB Controller #2*/ +/* port3 - ATA-5 Controller*/ +/* port4 - MDD*/ +/* port5 - AC97*/ +/* port6 - USB Controller #1*/ +/* port7 - GLCP*/ + + +/* SouthBridge Equates*/ +/* MSR_SB and SB_SHIFT are located in CPU.inc*/ +#define MSR_SB_GLIU ((9 << 14) + MSR_SB) /* 51024xxx or 510*xxxx - fake out just like GL0 on CPU. */ +#define MSR_SB_GLPCI (MSR_SB) /* 5100xxxx - don't go to the GLIU */ +#define MSR_SB_USB2 ((2 << SB_SHIFT) + MSR_SB) /* 5120xxxx */ +#define MSR_SB_ATA ((3 << SB_SHIFT) + MSR_SB) /* 5130xxxx */ +#define MSR_SB_MDD ((4 << SB_SHIFT) + MSR_SB) /* 5140xxxx, a.k.a. DIVIL = Diverse Integrated Logic device */ +#define MSR_SB_AC97 ((5 << SB_SHIFT) + MSR_SB) /* 5150xxxx */ +#define MSR_SB_USB1 ((6 << SB_SHIFT) + MSR_SB) /* 5160xxxx */ +#define MSR_SB_GLCP ((7 << SB_SHIFT) + MSR_SB) /* 5170xxxx */ + +/* */ +/* GLIU*/ +/* */ +#define GLIU_SB_GLD_MSR_CAP ( MSR_SB_GLIU + 0x00) +#define GLIU_SB_GLD_MSR_CONF ( MSR_SB_GLIU + 0x01) +#define GLIU_SB_GLD_MSR_PM ( MSR_SB_GLIU + 0x04) + +/* */ +/* USB1*/ +/* */ +#define USB1_SB_GLD_MSR_CAP ( MSR_SB_USB1 + 0x00) +#define USB1_SB_GLD_MSR_CONF ( MSR_SB_USB1 + 0x01) +#define USB1_SB_GLD_MSR_PM ( MSR_SB_USB1 + 0x04) +/* */ +/* USB2*/ +/* */ +#define USB2_SB_GLD_MSR_CAP ( MSR_SB_USB2 + 0x00) +#define USB2_SB_GLD_MSR_CONF ( MSR_SB_USB2 + 0x01) +#define USB2_SB_GLD_MSR_PM ( MSR_SB_USB2 + 0x04) + + +/* */ +/* ATA*/ +/* */ +#define ATA_SB_GLD_MSR_CAP ( MSR_SB_ATA + 0x00) +#define ATA_SB_GLD_MSR_CONF ( MSR_SB_ATA + 0x01) +#define ATA_SB_GLD_MSR_ERR ( MSR_SB_ATA + 0x03) +#define ATA_SB_GLD_MSR_PM ( MSR_SB_ATA + 0x04) + +/* */ +/* AC97*/ +/* */ +#define AC97_SB_GLD_MSR_CAP ( MSR_SB_AC97 + 0x00) +#define AC97_SB_GLD_MSR_CONF ( MSR_SB_AC97 + 0x01) +#define AC97_SB_GLD_MSR_PM ( MSR_SB_AC97 + 0x04) + +/* */ +/* GLPCI*/ +/* */ +#define GLPCI_SB_GLD_MSR_CAP ( MSR_SB_GLPCI + 0x00) +#define GLPCI_SB_GLD_MSR_CONF ( MSR_SB_GLPCI + 0x01) +#define GLPCI_SB_GLD_MSR_PM ( MSR_SB_GLPCI + 0x04) +#define GLPCI_SB_CTRL ( MSR_SB_GLPCI + 0x10) +#define GLPCI_CRTL_PPIDE_SET ( 1 << 17) +/* */ +/* GLCP*/ +/* */ +#define GLCP_SB_GLD_MSR_CAP ( MSR_SB_GLCP + 0x00) +#define GLCP_SB_GLD_MSR_CONF ( MSR_SB_GLCP + 0x01) +#define GLCP_SB_GLD_MSR_PM ( MSR_SB_GLCP + 0x04) + +/* */ +/* MDD*/ +/* */ + +#define MDD_SMBUS (0x6000) +#define MDD_GPIO (0x6100) +#define MDD_MFGPT (0x6200) +#define MDD_FLASH_BAR_0 (0x6400) +#define MDD_FLASH_BAR_1 (0x6500) +#define MDD_FLASH_BAR_2 (0x6600) +#define MDD_FLASH_BAR_3 (0x6700) + +#define MDD_ACPI_BASE (0x9C00) +#define MDD_PM (0x9D00) + + +// # FIXME +#define GPIO_BASE MDD_GPIO +#define ACPI_BASE MDD_ACPI_BASE +#define PMLogic_BASE MDD_PM + + +#define MDD_SB_GLD_MSR_CAP ( MSR_SB_MDD + 0x00) +#define MDD_SB_GLD_MSR_CONF ( MSR_SB_MDD + 0x01) +#define MDD_SB_GLD_MSR_PM ( MSR_SB_MDD + 0x04) +#define LBAR_EN ( 0x01) +#define IO_MASK ( 0x1f) +#define MEM_MASK ( 0x0FFFFF) +#define MDD_LBAR_IRQ ( MSR_SB_MDD + 0x08) +#define MDD_LBAR_KEL1 ( MSR_SB_MDD + 0x09) +#define MDD_LBAR_KEL2 ( MSR_SB_MDD + 0x0A) +#define MDD_LBAR_SMB ( MSR_SB_MDD + 0x0B) +#define MDD_LBAR_GPIO ( MSR_SB_MDD + 0x0C) +#define MDD_LBAR_MFGPT ( MSR_SB_MDD + 0x0D) +#define MDD_LBAR_ACPI ( MSR_SB_MDD + 0x0E) +#define MDD_LBAR_PMS ( MSR_SB_MDD + 0x0F) + +#define MDD_LBAR_FLSH0 ( MSR_SB_MDD + 0x010) +#define MDD_LBAR_FLSH1 ( MSR_SB_MDD + 0x011) +#define MDD_LBAR_FLSH2 ( MSR_SB_MDD + 0x012) +#define MDD_LBAR_FLSH3 ( MSR_SB_MDD + 0x013) +#define MDD_LEG_IO ( MSR_SB_MDD + 0x014) +#define MDD_PIN_OPT ( MSR_SB_MDD + 0x015) +#define MDD_SOFT_IRQ ( MSR_SB_MDD + 0x016) +#define MDD_SOFT_RESET ( MSR_SB_MDD + 0x017) +#define MDD_NORF_CNTRL ( MSR_SB_MDD + 0x018) +#define MDD_NORF_T01 ( MSR_SB_MDD + 0x019) +#define MDD_NORF_T23 ( MSR_SB_MDD + 0x01A) +#define MDD_NANDF_DATA ( MSR_SB_MDD + 0x01B) +#define MDD_NADF_CNTL ( MSR_SB_MDD + 0x01C) +#define MDD_AC_DMA ( MSR_SB_MDD + 0x01E) +#define MDD_KEL_CNTRL ( MSR_SB_MDD + 0x01F) + +#define MDD_IRQM_YLOW ( MSR_SB_MDD + 0x020) +#define MDD_IRQM_YHIGH ( MSR_SB_MDD + 0x021) +#define MDD_IRQM_ZLOW ( MSR_SB_MDD + 0x022) +#define MDD_IRQM_ZHIGH ( MSR_SB_MDD + 0x023) +#define MDD_IRQM_PRIM ( MSR_SB_MDD + 0x024) +#define MDD_IRQM_LPC ( MSR_SB_MDD + 0x025) +#define MDD_IRQM_LXIRR ( MSR_SB_MDD + 0x026) +#define MDD_IRQM_HXIRR ( MSR_SB_MDD + 0x027) + +#define MDD_MFGPT_IRQ ( MSR_SB_MDD + 0x028) +#define MDD_MFGPT_NR ( MSR_SB_MDD + 0x029) +#define MDD_MFGPT_RES0 ( MSR_SB_MDD + 0x02A) +#define MDD_MFGPT_RES1 ( MSR_SB_MDD + 0x02B) + +#define MDD_FLOP_S3F2 ( MSR_SB_MDD + 0x030) +#define MDD_FLOP_S3F7 ( MSR_SB_MDD + 0x031) +#define MDD_FLOP_S372 ( MSR_SB_MDD + 0x032) +#define MDD_FLOP_S377 ( MSR_SB_MDD + 0x033) + +#define MDD_PIC_S ( MSR_SB_MDD + 0x034) +#define MDD_PIT_S ( MSR_SB_MDD + 0x036) +#define MDD_PIT_CNTRL ( MSR_SB_MDD + 0x037) + +#define MDD_UART1_MOD ( MSR_SB_MDD + 0x038) +#define MDD_UART1_DON ( MSR_SB_MDD + 0x039) +#define MDD_UART1_CONF ( MSR_SB_MDD + 0x03A) +#define MDD_UART2_MOD ( MSR_SB_MDD + 0x03C) +#define MDD_UART2_DON ( MSR_SB_MDD + 0x03D) +#define MDD_UART2_CONF ( MSR_SB_MDD + 0x03E) + +#define MDD_DMA_MAP ( MSR_SB_MDD + 0x040) +#define MDD_DMA_SHAD1 ( MSR_SB_MDD + 0x041) +#define MDD_DMA_SHAD2 ( MSR_SB_MDD + 0x042) +#define MDD_DMA_SHAD3 ( MSR_SB_MDD + 0x043) +#define MDD_DMA_SHAD4 ( MSR_SB_MDD + 0x044) +#define MDD_DMA_SHAD5 ( MSR_SB_MDD + 0x045) +#define MDD_DMA_SHAD6 ( MSR_SB_MDD + 0x046) +#define MDD_DMA_SHAD7 ( MSR_SB_MDD + 0x047) +#define MDD_DMA_SHAD8 ( MSR_SB_MDD + 0x048) +#define MDD_DMA_SHAD9 ( MSR_SB_MDD + 0x049) + +#define MDD_LPC_EADDR ( MSR_SB_MDD + 0x04C) +#define MDD_LPC_ESTAT ( MSR_SB_MDD + 0x04D) +#define MDD_LPC_SIRQ ( MSR_SB_MDD + 0x04E) +#define MDD_LPC_RES ( MSR_SB_MDD + 0x04F) + +#define MDD_PML_TMR ( MSR_SB_MDD + 0x050) +#define MDD_RTC_RAM_LO_CK ( MSR_SB_MDD + 0x054) +#define MDD_RTC_DOMA_IND ( MSR_SB_MDD + 0x055) +#define MDD_RTC_MONA_IND ( MSR_SB_MDD + 0x056) +#define MDD_RTC_CENTURY_OFFSET ( MSR_SB_MDD + 0x057) + +/* ***********************************************************/ +/* LBUS Device Equates - */ +/* ***********************************************************/ + +/* */ +/* SMBus*/ +/* */ + +#define SMBUS_SMBSDA ( SMBUS_BASE + 0x00) +#define SMBUS_SMBST ( SMBUS_BASE + 0x01) +#define SMBST_SLVSTP_SET ( 1 << 7) +#define SMBST_SDAST_SET ( 1 << 6) +#define SMBST_BER_SET ( 1 << 5) +#define SMBST_NEGACK_SET ( 1 << 4) +#define SMBST_STASTR_SET ( 1 << 3) +#define SMBST_NMATCH_SET ( 1 << 2) +#define SMBST_MASTER_SET ( 1 << 1) +#define SMBST_XMIT_SET ( 1 << 0) +#define SMBUS_SMBCST ( SMBUS_BASE + 0x02) +#define SMBCST_TGSCL_SET ( 1 << 5) +#define SMBCST_TSDA_SET ( 1 << 4) +#define SMBCST_GCMTCH_SET ( 1 << 3) +#define SMBCST_MATCH_SET ( 1 << 2) +#define SMBCST_BB_SET ( 1 << 1) +#define SMBCST_BUSY_SET ( 1 << 0) +#define SMBUS_SMBCTL1 ( SMBUS_BASE + 0x03) +#define SMBCTL1_STASTRE_SET ( 1 << 7) +#define SMBCTL1_NMINTE_SET ( 1 << 6) +#define SMBCTL1_GCMEN_SET ( 1 << 5) +#define SMBCTL1_RECACK_SET ( 1 << 4) +#define SMBCTL1_DMAEN_SET ( 1 << 3) +#define SMBCTL1_INTEN_SET ( 1 << 2) +#define SMBCTL1_STOP_SET ( 1 << 1) +#define SMBCTL1_START_SET ( 1 << 0) +#define SMBUS_SMBADDR ( SMBUS_BASE + 0x04) +#define SMBADDR_SAEN_SET ( 1 << 7) +#define SMBUS_SMBCTL2 ( SMBUS_BASE + 0x05) +#define SMBCTL2_SCLFRQ_SHIFT ( 1 << 1) +#define SMBCTL2_ENABLE_SET ( 1 << 0) + +/* */ +/* GPIO*/ +/* */ + +#define GPIOL_0_SET ( 1 << 0) +#define GPIOL_1_SET ( 1 << 1) +#define GPIOL_2_SET ( 1 << 2) +#define GPIOL_3_SET ( 1 << 3) +#define GPIOL_4_SET ( 1 << 4) +#define GPIOL_5_SET ( 1 << 5) +#define GPIOL_6_SET ( 1 << 6) +#define GPIOL_7_SET ( 1 << 7) +#define GPIOL_8_SET ( 1 << 8) +#define GPIOL_9_SET ( 1 << 9) +#define GPIOL_10_SET ( 1 << 10) +#define GPIOL_11_SET ( 1 << 11) +#define GPIOL_12_SET ( 1 << 12) +#define GPIOL_13_SET ( 1 << 13) +#define GPIOL_14_SET ( 1 << 14) +#define GPIOL_15_SET ( 1 << 15) + +#define GPIOL_0_CLEAR ( 1 << 16) +#define GPIOL_1_CLEAR ( 1 << 17) +#define GPIOL_2_CLEAR ( 1 << 18) +#define GPIOL_3_CLEAR ( 1 << 19) +#define GPIOL_4_CLEAR ( 1 << 20) +#define GPIOL_5_CLEAR ( 1 << 21) +#define GPIOL_6_CLEAR ( 1 << 22) +#define GPIOL_7_CLEAR ( 1 << 23) +#define GPIOL_8_CLEAR ( 1 << 24) +#define GPIOL_9_CLEAR ( 1 << 25) +#define GPIOL_10_CLEAR ( 1 << 26) +#define GPIOL_11_CLEAR ( 1 << 27) +#define GPIOL_12_CLEAR ( 1 << 28) +#define GPIOL_13_CLEAR ( 1 << 29) +#define GPIOL_14_CLEAR ( 1 << 30) +#define GPIOL_15_CLEAR ( 1 << 31) + +#define GPIOH_16_SET ( 1 << 0) +#define GPIOH_17_SET ( 1 << 1) +#define GPIOH_18_SET ( 1 << 2) +#define GPIOH_19_SET ( 1 << 3) +#define GPIOH_20_SET ( 1 << 4) +#define GPIOH_21_SET ( 1 << 5) +#define GPIOH_22_SET ( 1 << 6) +#define GPIOH_23_SET ( 1 << 7) +#define GPIOH_24_SET ( 1 << 8) +#define GPIOH_25_SET ( 1 << 9) +#define GPIOH_26_SET ( 1 << 10) +#define GPIOH_27_SET ( 1 << 11) +#define GPIOH_28_SET ( 1 << 12) +#define GPIOH_29_SET ( 1 << 13) +#define GPIOH_30_SET ( 1 << 14) +#define GPIOH_31_SET ( 1 << 15) + +#define GPIOH_16_CLEAR ( 1 << 16) +#define GPIOH_17_CLEAR ( 1 << 17) +#define GPIOH_18_CLEAR ( 1 << 18) +#define GPIOH_19_CLEAR ( 1 << 19) +#define GPIOH_20_CLEAR ( 1 << 20) +#define GPIOH_21_CLEAR ( 1 << 21) +#define GPIOH_22_CLEAR ( 1 << 22) +#define GPIOH_23_CLEAR ( 1 << 23) +#define GPIOH_24_CLEAR ( 1 << 24) +#define GPIOH_25_CLEAR ( 1 << 25) +#define GPIOH_26_CLEAR ( 1 << 26) +#define GPIOH_27_CLEAR ( 1 << 27) +#define GPIOH_28_CLEAR ( 1 << 28) +#define GPIOH_29_CLEAR ( 1 << 29) +#define GPIOH_30_CLEAR ( 1 << 30) +#define GPIOH_31_CLEAR ( 1 << 31) + + +/* GPIO LOW Bank Bit Registers*/ +#define GPIOL_OUTPUT_VALUE ( GPIO_BASE + 0x00) +#define GPIOL_OUTPUT_ENABLE ( GPIO_BASE + 0x04) +#define GPIOL_OUT_OPENDRAIN ( GPIO_BASE + 0x08) +#define GPIOL_OUTPUT_INVERT_ENABLE ( GPIO_BASE + 0x0C) +#define GPIOL_OUT_AUX1_SELECT ( GPIO_BASE + 0x10) +#define GPIOL_OUT_AUX2_SELECT ( GPIO_BASE + 0x14) +#define GPIOL_PULLUP_ENABLE ( GPIO_BASE + 0x18) +#define GPIOL_PULLDOWN_ENABLE ( GPIO_BASE + 0x1C) +#define GPIOL_INPUT_ENABLE ( GPIO_BASE + 0x20) +#define GPIOL_INPUT_INVERT_ENABLE ( GPIO_BASE + 0x24) +#define GPIOL_IN_FILTER_ENABLE ( GPIO_BASE + 0x28) +#define GPIOL_IN_EVENTCOUNT_ENABLE ( GPIO_BASE + 0x2C) +#define GPIOL_READ_BACK ( GPIO_BASE + 0x30) +#define GPIOL_IN_AUX1_SELECT ( GPIO_BASE + 0x34) +#define GPIOL_EVENTS_ENABLE ( GPIO_BASE + 0x38) +#define GPIOL_LOCK_ENABLE ( GPIO_BASE + 0x3C) +#define GPIOL_IN_POSEDGE_ENABLE ( GPIO_BASE + 0x40) +#define GPIOL_IN_NEGEDGE_ENABLE ( GPIO_BASE + 0x44) +#define GPIOL_IN_POSEDGE_STATUS ( GPIO_BASE + 0x48) +#define GPIOL_IN_NEGEDGE_STATUS ( GPIO_BASE + 0x4C) + +/* GPIO High Bank Bit Registers*/ +#define GPIOH_OUTPUT_VALUE ( GPIO_BASE + 0x80) +#define GPIOH_OUTPUT_ENABLE ( GPIO_BASE + 0x84) +#define GPIOH_OUT_OPENDRAIN ( GPIO_BASE + 0x88) +#define GPIOH_OUTPUT_INVERT_ENABLE ( GPIO_BASE + 0x8C) +#define GPIOH_OUT_AUX1_SELECT ( GPIO_BASE + 0x90) +#define GPIOH_OUT_AUX2_SELECT ( GPIO_BASE + 0x94) +#define GPIOH_PULLUP_ENABLE ( GPIO_BASE + 0x98) +#define GPIOH_PULLDOWN_ENABLE ( GPIO_BASE + 0x9C) +#define GPIOH_INPUT_ENABLE ( GPIO_BASE + 0x0A0) +#define GPIOH_INPUT_INVERT_ENABLE ( GPIO_BASE + 0x0A4) +#define GPIOH_IN_FILTER_ENABLE ( GPIO_BASE + 0x0A8) +#define GPIOH_IN_EVENTCOUNT_ENABLE ( GPIO_BASE + 0x0AC) +#define GPIOH_READ_BACK ( GPIO_BASE + 0x0B0) +#define GPIOH_IN_AUX1_SELECT ( GPIO_BASE + 0x0B4) +#define GPIOH_EVENTS_ENABLE ( GPIO_BASE + 0x0B8) +#define GPIOH_LOCK_ENABLE ( GPIO_BASE + 0x0BC) +#define GPIOH_IN_POSEDGE_ENABLE ( GPIO_BASE + 0x0C0) +#define GPIOH_IN_NEGEDGE_ENABLE ( GPIO_BASE + 0x0C4) +#define GPIOH_IN_POSEDGE_STATUS ( GPIO_BASE + 0x0C8) +#define GPIOH_IN_NEGEDGE_STATUS ( GPIO_BASE + 0x0CC) + +/* Input Conditioning Function Registers*/ +#define GPIO_00_FILTER_AMOUNT ( GPIO_BASE + 0x50) +#define GPIO_00_FILTER_COUNT ( GPIO_BASE + 0x52) +#define GPIO_00_EVENT_COUNT ( GPIO_BASE + 0x54) +#define GPIO_00_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x56) +#define GPIO_01_FILTER_AMOUNT ( GPIO_BASE + 0x58) +#define GPIO_01_FILTER_COUNT ( GPIO_BASE + 0x5A) +#define GPIO_01_EVENT_COUNT ( GPIO_BASE + 0x5C) +#define GPIO_01_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x5E) +#define GPIO_02_FILTER_AMOUNT ( GPIO_BASE + 0x60) +#define GPIO_02_FILTER_COUNT ( GPIO_BASE + 0x62) +#define GPIO_02_EVENT_COUNT ( GPIO_BASE + 0x64) +#define GPIO_02_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x66) +#define GPIO_03_FILTER_AMOUNT ( GPIO_BASE + 0x68) +#define GPIO_03_FILTER_COUNT ( GPIO_BASE + 0x6A) +#define GPIO_03_EVENT_COUNT ( GPIO_BASE + 0x6C) +#define GPIO_03_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x6E) +#define GPIO_04_FILTER_AMOUNT ( GPIO_BASE + 0x70) +#define GPIO_04_FILTER_COUNT ( GPIO_BASE + 0x72) +#define GPIO_04_EVENT_COUNT ( GPIO_BASE + 0x74) +#define GPIO_04_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x76) +#define GPIO_05_FILTER_AMOUNT ( GPIO_BASE + 0x78) +#define GPIO_05_FILTER_COUNT ( GPIO_BASE + 0x7A) +#define GPIO_05_EVENT_COUNT ( GPIO_BASE + 0x7C) +#define GPIO_05_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x7E) +#define GPIO_06_FILTER_AMOUNT ( GPIO_BASE + 0x0D0) +#define GPIO_06_FILTER_COUNT ( GPIO_BASE + 0x0D2) +#define GPIO_06_EVENT_COUNT ( GPIO_BASE + 0x0D4) +#define GPIO_06_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x0D6) +#define GPIO_07_FILTER_AMOUNT ( GPIO_BASE + 0x0D8) +#define GPIO_07_FILTER_COUNT ( GPIO_BASE + 0x0DA) +#define GPIO_07_EVENT_COUNT ( GPIO_BASE + 0x0DC) +#define GPIO_07_EVENTCOMPARE_VALUE ( GPIO_BASE + 0x0DE) + +/* R/W GPIO Interrupt &PME Mapper Registers*/ +#define GPIO_MAPPER_X ( GPIO_BASE + 0x0E0) +#define GPIO_MAPPER_Y ( GPIO_BASE + 0x0E4) +#define GPIO_MAPPER_Z ( GPIO_BASE + 0x0E8) +#define GPIO_MAPPER_W ( GPIO_BASE + 0x0EC) +#define GPIO_FE_SELECT_0 ( GPIO_BASE + 0x0F0) +#define GPIO_FE_SELECT_1 ( GPIO_BASE + 0x0F1) +#define GPIO_FE_SELECT_2 ( GPIO_BASE + 0x0F2) +#define GPIO_FE_SELECT_3 ( GPIO_BASE + 0x0F3) +#define GPIO_FE_SELECT_4 ( GPIO_BASE + 0x0F4) +#define GPIO_FE_SELECT_5 ( GPIO_BASE + 0x0F5) +#define GPIO_FE_SELECT_6 ( GPIO_BASE + 0x0F6) +#define GPIO_FE_SELECT_7 ( GPIO_BASE + 0x0F7) + +/* Event Counter Decrement Registers*/ +#define GPIOL_IN_EVENT_DECREMENT ( GPIO_BASE + 0x0F8) +#define GPIOH_IN_EVENT_DECREMENT ( GPIO_BASE + 0x0FC) + +/* This is for 286reset compatibility. 0xCange to mat0xc 5535 virtualized stuff.*/ +#define FUNC0 ( 0x90) + + +/* sworley, PMC register*/ +#define PM_SSD ( PMLogic_BASE + 0x00) +#define PM_SCXA ( PMLogic_BASE + 0x04) +#define PM_SCYA ( PMLogic_BASE + 0x08) +#define PM_SODA ( PMLogic_BASE + 0x0C) +#define PM_SCLK ( PMLogic_BASE + 0x10) +#define PM_SED ( PMLogic_BASE + 0x14) +#define PM_SCXD ( PMLogic_BASE + 0x18) +#define PM_SCYD ( PMLogic_BASE + 0x1C) +#define PM_SIDD ( PMLogic_BASE + 0x20) +#define PM_WKD ( PMLogic_BASE + 0x30) +#define PM_WKXD ( PMLogic_BASE + 0x34) +#define PM_RD ( PMLogic_BASE + 0x38) +#define PM_WKXA ( PMLogic_BASE + 0x3C) +#define PM_FSD ( PMLogic_BASE + 0x40) +#define PM_TSD ( PMLogic_BASE + 0x44) +#define PM_PSD ( PMLogic_BASE + 0x48) +#define PM_NWKD ( PMLogic_BASE + 0x4C) +#define PM_AWKD ( PMLogic_BASE + 0x50) +#define PM_SSC ( PMLogic_BASE + 0x54) + + +/* FLASH device macros */ +#define FLASH_TYPE_NONE 0 /* No flash device installed */ +#define FLASH_TYPE_NAND 1 /* NAND device */ +#define FLASH_TYPE_NOR 2 /* NOR device */ + +#define FLASH_IF_MEM 1 /* Memory or memory-mapped I/O interface for Flash device */ +#define FLASH_IF_IO 2 /* I/O interface for Flash device */ + +/* Flash Memory Mask values */ +#define FLASH_MEM_DEFAULT 0x00000000 +#define FLASH_MEM_4K 0xFFFFF000 +#define FLASH_MEM_8K 0xFFFFE000 +#define FLASH_MEM_16K 0xFFFFC000 +#define FLASH_MEM_128K 0xFFFE0000 +#define FLASH_MEM_512K 0xFFFC0000 +#define FLASH_MEM_4M 0xFFC00000 +#define FLASH_MEM_8M 0xFF800000 +#define FLASH_MEM_16M 0xFF000000 + +/* Flash IO Mask values */ +#define FLASH_IO_DEFAULT 0x00000000 +#define FLASH_IO_16B 0x0000FFF0 +#define FLASH_IO_32B 0x0000FFE0 +#define FLASH_IO_64B 0x0000FFC0 +#define FLASH_IO_128B 0x0000FF80 +#define FLASH_IO_256B 0x0000FF00 + + + +#endif /* CPU_AMD_LXDEF_H */ |