Add Gigadevice SPI rom support

Add support for GigaDevice SPI ROMS.
The GD25Q64B device has been tested, the other rom devices added to the
file have not.

Change-Id: If35676ca6b90329f15667ebb32efa0d1a159ae91
Signed-off-by: Martin Roth <martin@se-eng.com>
Reviewed-on: http://review.coreboot.org/1747
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 241 insertions, 0 deletions

diff --git a/src/drivers/spi/gigadevice.c b/src/drivers/spi/gigadevice.c
new file mode 100644
index 0000000000..8454705b69
--- /dev/null
+++ b/src/drivers/spi/gigadevice.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (c) 2012, Google Inc.
+ *
+ * Based on drivers/spi/winbond.c
+ *
+ * Copyright 2008, Network Appliance Inc.
+ * Jason McMullan <mcmullan@netapp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <stdlib.h>
+#include <spi_flash.h>
+#include "spi_flash_internal.h"
+
+/* GD25Pxx-specific commands */
+#define CMD_GD25_WREN		0x06	/* Write Enable */
+#define CMD_GD25_WRDI		0x04	/* Write Disable */
+#define CMD_GD25_RDSR		0x05	/* Read Status Register */
+#define CMD_GD25_WRSR		0x01	/* Write Status Register */
+#define CMD_GD25_READ		0x03	/* Read Data Bytes */
+#define CMD_GD25_FAST_READ	0x0b	/* Read Data Bytes at Higher Speed */
+#define CMD_GD25_PP		0x02	/* Page Program */
+#define CMD_GD25_SE		0x20	/* Sector (4K) Erase */
+#define CMD_GD25_BE		0xd8	/* Block (64K) Erase */
+#define CMD_GD25_CE		0xc7	/* Chip Erase */
+#define CMD_GD25_DP		0xb9	/* Deep Power-down */
+#define CMD_GD25_RES		0xab	/* Release from DP, and Read Signature */
+
+struct gigadevice_spi_flash_params {
+	uint16_t	id;
+	/* Log2 of page size in power-of-two mode */
+	uint8_t		l2_page_size;
+	uint16_t	pages_per_sector;
+	uint16_t	sectors_per_block;
+	uint16_t	nr_blocks;
+	const char	*name;
+};
+
+/* spi_flash needs to be first so upper layers can free() it */
+struct gigadevice_spi_flash {
+	struct spi_flash flash;
+	const struct gigadevice_spi_flash_params *params;
+};
+
+static inline struct gigadevice_spi_flash *
+to_gigadevice_spi_flash(struct spi_flash *flash)
+{
+	return container_of(flash, struct gigadevice_spi_flash, flash);
+}
+
+static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
+	{
+		.id			= 0x4014,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 16,
+		.name			= "GD25Q80",
+	},
+	{
+		.id			= 0x4015,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 32,
+		.name			= "GD25Q16(B)",
+	},
+	{
+		.id			= 0x4016,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 64,
+		.name			= "GD25Q32(B)",
+	},
+	{
+		.id			= 0x6016,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 64,
+		.name			= "GD25LQ32",
+	},
+	{
+		.id			= 0x4017,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 128,
+		.name			= "GD25Q64(B)",
+	},
+	{
+		.id			= 0x4018,
+		.l2_page_size		= 8,
+		.pages_per_sector	= 16,
+		.sectors_per_block	= 16,
+		.nr_blocks		= 256,
+		.name			= "GD25Q128(B)",
+	},
+};
+
+static int gigadevice_write(struct spi_flash *flash, u32 offset,
+			    size_t len, const void *buf)
+{
+	struct gigadevice_spi_flash *stm = to_gigadevice_spi_flash(flash);
+	unsigned long byte_addr;
+	unsigned long page_size;
+	size_t chunk_len;
+	size_t actual;
+	int ret;
+	u8 cmd[4];
+
+	page_size = min(1 << stm->params->l2_page_size, CONTROLLER_PAGE_LIMIT);
+	byte_addr = offset % page_size;
+
+	ret = spi_claim_bus(flash->spi);
+	if (ret) {
+		printk(BIOS_WARNING,
+		       "SF gigadevice.c: Unable to claim SPI bus\n");
+		return ret;
+	}
+
+	for (actual = 0; actual < len; actual += chunk_len) {
+		chunk_len = min(len - actual, page_size - byte_addr);
+
+		ret = spi_flash_cmd(flash->spi, CMD_GD25_WREN, NULL, 0);
+		if (ret < 0) {
+			printk(BIOS_WARNING,
+			       "SF gigadevice.c: Enabling Write failed\n");
+			goto out;
+		}
+
+		cmd[0] = CMD_GD25_PP;
+		cmd[1] = (offset >> 16) & 0xff;
+		cmd[2] = (offset >> 8) & 0xff;
+		cmd[3] = offset & 0xff;
+#if CONFIG_DEBUG_SPI_FLASH
+		printk(BIOS_SPEW,
+		       "PP gigadevice.c: %#p => cmd = { %#02x %#02x%02x%02x }"
+		       " chunk_len = %zu\n", buf + actual,
+		       cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+#endif
+
+		ret = spi_flash_cmd_write(flash->spi, cmd, 4,
+					  buf + actual, chunk_len);
+		if (ret < 0) {
+			printk(BIOS_WARNING,
+			       "SF gigadevice.c: Page Program failed\n");
+			goto out;
+		}
+
+		ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+		if (ret)
+			goto out;
+
+		offset += chunk_len;
+		byte_addr = 0;
+	}
+
+	printk(BIOS_INFO,
+	       "SF gigadevice.c: Successfully programmed %zu bytes @ %#x\n",
+	       len, (unsigned int)(offset - len));
+	ret = 0;
+
+out:
+	spi_release_bus(flash->spi);
+	return ret;
+}
+
+static int gigadevice_erase(struct spi_flash *flash, u32 offset, size_t len)
+{
+	return spi_flash_cmd_erase(flash, CMD_GD25_SE, offset, len);
+}
+
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
+{
+	const struct gigadevice_spi_flash_params *params;
+	unsigned page_size;
+	struct gigadevice_spi_flash *stm;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
+		params = &gigadevice_spi_flash_table[i];
+		if (params->id == ((idcode[1] << 8) | idcode[2]))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
+		printk(BIOS_WARNING,
+		       "SF gigadevice.c: Unsupported ID %#02x%02x\n",
+		       idcode[1], idcode[2]);
+		return NULL;
+	}
+
+	stm = malloc(sizeof(struct gigadevice_spi_flash));
+	if (!stm) {
+		printk(BIOS_WARNING,
+		       "SF gigadevice.c: Failed to allocate memory\n");
+		return NULL;
+	}
+
+	stm->params = params;
+	stm->flash.spi = spi;
+	stm->flash.name = params->name;
+
+	/* Assuming power-of-two page size initially. */
+	page_size = 1 << params->l2_page_size;
+
+	stm->flash.write = gigadevice_write;
+	stm->flash.erase = gigadevice_erase;
+#ifdef CONFIG_SPI_FLASH_NO_FAST_READ
+	stm->flash.read = spi_flash_cmd_read_slow;
+#else
+	stm->flash.read = spi_flash_cmd_read_fast;
+#endif
+	stm->flash.sector_size = (1 << stm->params->l2_page_size) *
+		stm->params->pages_per_sector;
+	stm->flash.size = page_size * params->pages_per_sector
+				* params->sectors_per_block
+				* params->nr_blocks;
+
+	return &stm->flash;
+}