drives/spi_flash: add spi_flash_cmd_write_page_program()

The SPI flashes that support page programming mode had duplicated
the logic for writing in every driver. Add
spi_flash_cmd_write_page_program() and use the common implementation
to reduce code size that comes from duplication. The savings is
~2.5KiB per stage where the spi flash drivers are utilized.

Change-Id: Ie6db03fa8ad33789f1d07a718a769e4ca8bffe1d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>

1 files changed, 3 insertions, 59 deletions

diff --git a/src/drivers/spi/atmel.c b/src/drivers/spi/atmel.c
index 4496f4b08c..5e22eb68c1 100644
--- a/src/drivers/spi/atmel.c
+++ b/src/drivers/spi/atmel.c
@@ -103,66 +103,8 @@ static const struct atmel_spi_flash_params atmel_spi_flash_table[] = {
 	},
 };
 
-static int atmel_write(const struct spi_flash *flash, u32 offset, size_t len,
-		const void *buf)
-{
-	unsigned long byte_addr;
-	unsigned long page_size;
-	size_t chunk_len;
-	size_t actual;
-	int ret;
-	u8 cmd[4];
-
-	page_size = flash->page_size;
-
-	for (actual = 0; actual < len; actual += chunk_len) {
-		byte_addr = offset % page_size;
-		chunk_len = MIN(len - actual, page_size - byte_addr);
-		chunk_len = spi_crop_chunk(&flash->spi, sizeof(cmd), chunk_len);
-
-		cmd[0] = CMD_AT25_PP;
-		cmd[1] = (offset >> 16) & 0xff;
-		cmd[2] = (offset >> 8) & 0xff;
-		cmd[3] = offset & 0xff;
-#if CONFIG(DEBUG_SPI_FLASH)
-		printk(BIOS_SPEW, "PP: %p => cmd = { 0x%02x 0x%02x%02x%02x }"
-		        " chunk_len = %zu\n", buf + actual,
-			cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
-#endif
-
-		ret = spi_flash_cmd(&flash->spi, CMD_AT25_WREN, NULL, 0);
-		if (ret < 0) {
-			printk(BIOS_WARNING, "SF: Enabling Write failed\n");
-			goto out;
-		}
-
-		ret = spi_flash_cmd_write(&flash->spi, cmd, sizeof(cmd),
-				buf + actual, chunk_len);
-		if (ret < 0) {
-			printk(BIOS_WARNING, "SF: Atmel Page Program failed\n");
-			goto out;
-		}
-
-		ret = spi_flash_cmd_wait_ready(flash,
-				SPI_FLASH_PROG_TIMEOUT_MS);
-		if (ret)
-			goto out;
-
-		offset += chunk_len;
-	}
-
-#if CONFIG(DEBUG_SPI_FLASH)
-	printk(BIOS_SPEW, "SF: Atmel: Successfully programmed %zu bytes @"
-			" 0x%lx\n", len, (unsigned long)(offset - len));
-#endif
-	ret = 0;
-
-out:
-	return ret;
-}
-
 static const struct spi_flash_ops spi_flash_ops = {
-	.write = atmel_write,
+	.write = spi_flash_cmd_write_page_program,
 	.erase = spi_flash_cmd_erase,
 };
 
@@ -193,6 +135,8 @@ int spi_flash_probe_atmel(const struct spi_slave *spi, u8 *idcode,
 	flash->size = flash->sector_size * params->sectors_per_block *
 			params->nr_blocks;
 	flash->erase_cmd = CMD_AT25_SE;
+	flash->pp_cmd = CMD_AT25_PP;
+	flash->wren_cmd = CMD_AT25_WREN;
 
 	flash->ops = &spi_flash_ops;