intel/gma: Remove MCH register declarations.

i915_reg.h re-declares some of MCH registers as seen through MCHBAR mirror.
It's not currently used and we don't want any MCH registers in GFX.

Change-Id: I5fa4711fee60d64316696b7ed713013de8759b54
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5318
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

1 files changed, 0 insertions, 308 deletions

diff --git a/src/drivers/intel/gma/i915_reg.h b/src/drivers/intel/gma/i915_reg.h
index 61b909d083..155df4df6b 100644
--- a/src/drivers/intel/gma/i915_reg.h
+++ b/src/drivers/intel/gma/i915_reg.h
@@ -1203,299 +1203,6 @@
  */
 #define MCHBAR_MIRROR_BASE	0x10000
 
-#define MCHBAR_MIRROR_BASE_SNB	0x140000
-
-/** 915-945 and GM965 MCH register controlling DRAM channel access */
-#define DCC			0x10200
-#define DCC_ADDRESSING_MODE_SINGLE_CHANNEL		(0 << 0)
-#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC	(1 << 0)
-#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED	(2 << 0)
-#define DCC_ADDRESSING_MODE_MASK			(3 << 0)
-#define DCC_CHANNEL_XOR_DISABLE				(1 << 10)
-#define DCC_CHANNEL_XOR_BIT_17				(1 << 9)
-
-/** Pineview MCH register contains DDR3 setting */
-#define CSHRDDR3CTL            0x101a8
-#define CSHRDDR3CTL_DDR3       (1 << 2)
-
-/** 965 MCH register controlling DRAM channel configuration */
-#define C0DRB3			0x10206
-#define C1DRB3			0x10606
-
-/** snb MCH registers for reading the DRAM channel configuration */
-#define MAD_DIMM_C0			(MCHBAR_MIRROR_BASE_SNB + 0x5004)
-#define MAD_DIMM_C1			(MCHBAR_MIRROR_BASE_SNB + 0x5008)
-#define MAD_DIMM_C2			(MCHBAR_MIRROR_BASE_SNB + 0x500C)
-#define   MAD_DIMM_ECC_MASK		(0x3 << 24)
-#define   MAD_DIMM_ECC_OFF		(0x0 << 24)
-#define   MAD_DIMM_ECC_IO_ON_LOGIC_OFF	(0x1 << 24)
-#define   MAD_DIMM_ECC_IO_OFF_LOGIC_ON	(0x2 << 24)
-#define   MAD_DIMM_ECC_ON		(0x3 << 24)
-#define   MAD_DIMM_ENH_INTERLEAVE	(0x1 << 22)
-#define   MAD_DIMM_RANK_INTERLEAVE	(0x1 << 21)
-#define   MAD_DIMM_B_WIDTH_X16		(0x1 << 20) /* X8 chips if unset */
-#define   MAD_DIMM_A_WIDTH_X16		(0x1 << 19) /* X8 chips if unset */
-#define   MAD_DIMM_B_DUAL_RANK		(0x1 << 18)
-#define   MAD_DIMM_A_DUAL_RANK		(0x1 << 17)
-#define   MAD_DIMM_A_SELECT		(0x1 << 16)
-/* DIMM sizes are in multiples of 256mb. */
-#define   MAD_DIMM_B_SIZE_SHIFT		8
-#define   MAD_DIMM_B_SIZE_MASK		(0xff << MAD_DIMM_B_SIZE_SHIFT)
-#define   MAD_DIMM_A_SIZE_SHIFT		0
-#define   MAD_DIMM_A_SIZE_MASK		(0xff << MAD_DIMM_A_SIZE_SHIFT)
-
-
-/* Clocking configuration register */
-#define CLKCFG			0x10c00
-#define CLKCFG_FSB_400					(5 << 0)	/* hrawclk 100 */
-#define CLKCFG_FSB_533					(1 << 0)	/* hrawclk 133 */
-#define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
-#define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
-#define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
-#define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
-/* Note, below two are guess */
-#define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
-#define CLKCFG_FSB_1600_ALT				(0 << 0)	/* hrawclk 400 */
-#define CLKCFG_FSB_MASK					(7 << 0)
-#define CLKCFG_MEM_533					(1 << 4)
-#define CLKCFG_MEM_667					(2 << 4)
-#define CLKCFG_MEM_800					(3 << 4)
-#define CLKCFG_MEM_MASK					(7 << 4)
-
-#define TSC1			0x11001
-#define   TSE			(1<<0)
-#define TR1			0x11006
-#define TSFS			0x11020
-#define   TSFS_SLOPE_MASK	0x0000ff00
-#define   TSFS_SLOPE_SHIFT	8
-#define   TSFS_INTR_MASK	0x000000ff
-
-#define CRSTANDVID		0x11100
-#define PXVFREQ_BASE		0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */
-#define   PXVFREQ_PX_MASK	0x7f000000
-#define   PXVFREQ_PX_SHIFT	24
-#define VIDFREQ_BASE		0x11110
-#define VIDFREQ1		0x11110 /* VIDFREQ1-4 (0x1111c) (Cantiga) */
-#define VIDFREQ2		0x11114
-#define VIDFREQ3		0x11118
-#define VIDFREQ4		0x1111c
-#define   VIDFREQ_P0_MASK	0x1f000000
-#define   VIDFREQ_P0_SHIFT	24
-#define   VIDFREQ_P0_CSCLK_MASK	0x00f00000
-#define   VIDFREQ_P0_CSCLK_SHIFT 20
-#define   VIDFREQ_P0_CRCLK_MASK	0x000f0000
-#define   VIDFREQ_P0_CRCLK_SHIFT 16
-#define   VIDFREQ_P1_MASK	0x00001f00
-#define   VIDFREQ_P1_SHIFT	8
-#define   VIDFREQ_P1_CSCLK_MASK	0x000000f0
-#define   VIDFREQ_P1_CSCLK_SHIFT 4
-#define   VIDFREQ_P1_CRCLK_MASK	0x0000000f
-#define INTTOEXT_BASE_ILK	0x11300
-#define INTTOEXT_BASE		0x11120 /* INTTOEXT1-8 (0x1113c) */
-#define   INTTOEXT_MAP3_SHIFT	24
-#define   INTTOEXT_MAP3_MASK	(0x1f << INTTOEXT_MAP3_SHIFT)
-#define   INTTOEXT_MAP2_SHIFT	16
-#define   INTTOEXT_MAP2_MASK	(0x1f << INTTOEXT_MAP2_SHIFT)
-#define   INTTOEXT_MAP1_SHIFT	8
-#define   INTTOEXT_MAP1_MASK	(0x1f << INTTOEXT_MAP1_SHIFT)
-#define   INTTOEXT_MAP0_SHIFT	0
-#define   INTTOEXT_MAP0_MASK	(0x1f << INTTOEXT_MAP0_SHIFT)
-#define MEMSWCTL		0x11170 /* Ironlake only */
-#define   MEMCTL_CMD_MASK	0xe000
-#define   MEMCTL_CMD_SHIFT	13
-#define   MEMCTL_CMD_RCLK_OFF	0
-#define   MEMCTL_CMD_RCLK_ON	1
-#define   MEMCTL_CMD_CHFREQ	2
-#define   MEMCTL_CMD_CHVID	3
-#define   MEMCTL_CMD_VMMOFF	4
-#define   MEMCTL_CMD_VMMON	5
-#define   MEMCTL_CMD_STS	(1<<12) /* write 1 triggers command, clears
-					   when command complete */
-#define   MEMCTL_FREQ_MASK	0x0f00 /* jitter, from 0-15 */
-#define   MEMCTL_FREQ_SHIFT	8
-#define   MEMCTL_SFCAVM		(1<<7)
-#define   MEMCTL_TGT_VID_MASK	0x007f
-#define MEMIHYST		0x1117c
-#define MEMINTREN		0x11180 /* 16 bits */
-#define   MEMINT_RSEXIT_EN	(1<<8)
-#define   MEMINT_CX_SUPR_EN	(1<<7)
-#define   MEMINT_CONT_BUSY_EN	(1<<6)
-#define   MEMINT_AVG_BUSY_EN	(1<<5)
-#define   MEMINT_EVAL_CHG_EN	(1<<4)
-#define   MEMINT_MON_IDLE_EN	(1<<3)
-#define   MEMINT_UP_EVAL_EN	(1<<2)
-#define   MEMINT_DOWN_EVAL_EN	(1<<1)
-#define   MEMINT_SW_CMD_EN	(1<<0)
-#define MEMINTRSTR		0x11182 /* 16 bits */
-#define   MEM_RSEXIT_MASK	0xc000
-#define   MEM_RSEXIT_SHIFT	14
-#define   MEM_CONT_BUSY_MASK	0x3000
-#define   MEM_CONT_BUSY_SHIFT	12
-#define   MEM_AVG_BUSY_MASK	0x0c00
-#define   MEM_AVG_BUSY_SHIFT	10
-#define   MEM_EVAL_CHG_MASK	0x0300
-#define   MEM_EVAL_BUSY_SHIFT	8
-#define   MEM_MON_IDLE_MASK	0x00c0
-#define   MEM_MON_IDLE_SHIFT	6
-#define   MEM_UP_EVAL_MASK	0x0030
-#define   MEM_UP_EVAL_SHIFT	4
-#define   MEM_DOWN_EVAL_MASK	0x000c
-#define   MEM_DOWN_EVAL_SHIFT	2
-#define   MEM_SW_CMD_MASK	0x0003
-#define   MEM_INT_STEER_GFX	0
-#define   MEM_INT_STEER_CMR	1
-#define   MEM_INT_STEER_SMI	2
-#define   MEM_INT_STEER_SCI	3
-#define MEMINTRSTS		0x11184
-#define   MEMINT_RSEXIT		(1<<7)
-#define   MEMINT_CONT_BUSY	(1<<6)
-#define   MEMINT_AVG_BUSY	(1<<5)
-#define   MEMINT_EVAL_CHG	(1<<4)
-#define   MEMINT_MON_IDLE	(1<<3)
-#define   MEMINT_UP_EVAL	(1<<2)
-#define   MEMINT_DOWN_EVAL	(1<<1)
-#define   MEMINT_SW_CMD		(1<<0)
-#define MEMMODECTL		0x11190
-#define   MEMMODE_BOOST_EN	(1<<31)
-#define   MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */
-#define   MEMMODE_BOOST_FREQ_SHIFT 24
-#define   MEMMODE_IDLE_MODE_MASK 0x00030000
-#define   MEMMODE_IDLE_MODE_SHIFT 16
-#define   MEMMODE_IDLE_MODE_EVAL 0
-#define   MEMMODE_IDLE_MODE_CONT 1
-#define   MEMMODE_HWIDLE_EN	(1<<15)
-#define   MEMMODE_SWMODE_EN	(1<<14)
-#define   MEMMODE_RCLK_GATE	(1<<13)
-#define   MEMMODE_HW_UPDATE	(1<<12)
-#define   MEMMODE_FSTART_MASK	0x00000f00 /* starting jitter, 0-15 */
-#define   MEMMODE_FSTART_SHIFT	8
-#define   MEMMODE_FMAX_MASK	0x000000f0 /* max jitter, 0-15 */
-#define   MEMMODE_FMAX_SHIFT	4
-#define   MEMMODE_FMIN_MASK	0x0000000f /* min jitter, 0-15 */
-#define RCBMAXAVG		0x1119c
-#define MEMSWCTL2		0x1119e /* Cantiga only */
-#define   SWMEMCMD_RENDER_OFF	(0 << 13)
-#define   SWMEMCMD_RENDER_ON	(1 << 13)
-#define   SWMEMCMD_SWFREQ	(2 << 13)
-#define   SWMEMCMD_TARVID	(3 << 13)
-#define   SWMEMCMD_VRM_OFF	(4 << 13)
-#define   SWMEMCMD_VRM_ON	(5 << 13)
-#define   CMDSTS		(1<<12)
-#define   SFCAVM		(1<<11)
-#define   SWFREQ_MASK		0x0380 /* P0-7 */
-#define   SWFREQ_SHIFT		7
-#define   TARVID_MASK		0x001f
-#define MEMSTAT_CTG		0x111a0
-#define RCBMINAVG		0x111a0
-#define RCUPEI			0x111b0
-#define RCDNEI			0x111b4
-#define RSTDBYCTL		0x111b8
-#define   RS1EN			(1<<31)
-#define   RS2EN			(1<<30)
-#define   RS3EN			(1<<29)
-#define   D3RS3EN		(1<<28) /* Display D3 imlies RS3 */
-#define   SWPROMORSX		(1<<27) /* RSx promotion timers ignored */
-#define   RCWAKERW		(1<<26) /* Resetwarn from PCH causes wakeup */
-#define   DPRSLPVREN		(1<<25) /* Fast voltage ramp enable */
-#define   GFXTGHYST		(1<<24) /* Hysteresis to allow trunk gating */
-#define   RCX_SW_EXIT		(1<<23) /* Leave RSx and prevent re-entry */
-#define   RSX_STATUS_MASK	(7<<20)
-#define   RSX_STATUS_ON		(0<<20)
-#define   RSX_STATUS_RC1	(1<<20)
-#define   RSX_STATUS_RC1E	(2<<20)
-#define   RSX_STATUS_RS1	(3<<20)
-#define   RSX_STATUS_RS2	(4<<20) /* aka rc6 */
-#define   RSX_STATUS_RSVD	(5<<20) /* deep rc6 unsupported on ilk */
-#define   RSX_STATUS_RS3	(6<<20) /* rs3 unsupported on ilk */
-#define   RSX_STATUS_RSVD2	(7<<20)
-#define   UWRCRSXE		(1<<19) /* wake counter limit prevents rsx */
-#define   RSCRP			(1<<18) /* rs requests control on rs1/2 reqs */
-#define   JRSC			(1<<17) /* rsx coupled to cpu c-state */
-#define   RS2INC0		(1<<16) /* allow rs2 in cpu c0 */
-#define   RS1CONTSAV_MASK	(3<<14)
-#define   RS1CONTSAV_NO_RS1	(0<<14) /* rs1 doesn't save/restore context */
-#define   RS1CONTSAV_RSVD	(1<<14)
-#define   RS1CONTSAV_SAVE_RS1	(2<<14) /* rs1 saves context */
-#define   RS1CONTSAV_FULL_RS1	(3<<14) /* rs1 saves and restores context */
-#define   NORMSLEXLAT_MASK	(3<<12)
-#define   SLOW_RS123		(0<<12)
-#define   SLOW_RS23		(1<<12)
-#define   SLOW_RS3		(2<<12)
-#define   NORMAL_RS123		(3<<12)
-#define   RCMODE_TIMEOUT	(1<<11) /* 0 is eval interval method */
-#define   IMPROMOEN		(1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */
-#define   RCENTSYNC		(1<<9) /* rs coupled to cpu c-state (3/6/7) */
-#define   STATELOCK		(1<<7) /* locked to rs_cstate if 0 */
-#define   RS_CSTATE_MASK	(3<<4)
-#define   RS_CSTATE_C367_RS1	(0<<4)
-#define   RS_CSTATE_C36_RS1_C7_RS2 (1<<4)
-#define   RS_CSTATE_RSVD	(2<<4)
-#define   RS_CSTATE_C367_RS2	(3<<4)
-#define   REDSAVES		(1<<3) /* no context save if was idle during rs0 */
-#define   REDRESTORES		(1<<2) /* no restore if was idle during rs0 */
-#define VIDCTL			0x111c0
-#define VIDSTS			0x111c8
-#define VIDSTART		0x111cc /* 8 bits */
-#define MEMSTAT_ILK			0x111f8
-#define   MEMSTAT_VID_MASK	0x7f00
-#define   MEMSTAT_VID_SHIFT	8
-#define   MEMSTAT_PSTATE_MASK	0x00f8
-#define   MEMSTAT_PSTATE_SHIFT  3
-#define   MEMSTAT_MON_ACTV	(1<<2)
-#define   MEMSTAT_SRC_CTL_MASK	0x0003
-#define   MEMSTAT_SRC_CTL_CORE	0
-#define   MEMSTAT_SRC_CTL_TRB	1
-#define   MEMSTAT_SRC_CTL_THM	2
-#define   MEMSTAT_SRC_CTL_STDBY 3
-#define RCPREVBSYTUPAVG		0x113b8
-#define RCPREVBSYTDNAVG		0x113bc
-#define PMMISC			0x11214
-#define   MCPPCE_EN		(1<<0) /* enable PM_MSG from PCH->MPC */
-#define SDEW			0x1124c
-#define CSIEW0			0x11250
-#define CSIEW1			0x11254
-#define CSIEW2			0x11258
-#define PEW			0x1125c
-#define DEW			0x11270
-#define MCHAFE			0x112c0
-#define CSIEC			0x112e0
-#define DMIEC			0x112e4
-#define DDREC			0x112e8
-#define PEG0EC			0x112ec
-#define PEG1EC			0x112f0
-#define GFXEC			0x112f4
-#define RPPREVBSYTUPAVG		0x113b8
-#define RPPREVBSYTDNAVG		0x113bc
-#define ECR			0x11600
-#define   ECR_GPFE		(1<<31)
-#define   ECR_IMONE		(1<<30)
-#define   ECR_CAP_MASK		0x0000001f /* Event range, 0-31 */
-#define OGW0			0x11608
-#define OGW1			0x1160c
-#define EG0			0x11610
-#define EG1			0x11614
-#define EG2			0x11618
-#define EG3			0x1161c
-#define EG4			0x11620
-#define EG5			0x11624
-#define EG6			0x11628
-#define EG7			0x1162c
-#define PXW			0x11664
-#define PXWL			0x11680
-#define LCFUSE02		0x116c0
-#define   LCFUSE_HIV_MASK	0x000000ff
-#define CSIPLL0			0x12c10
-#define DDRMPLL1		0X12c20
-#define PEG_BAND_GAP_DATA	0x14d68
-
-#define GEN6_GT_THREAD_STATUS_REG 0x13805c
-#define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7
-#define GEN6_GT_THREAD_STATUS_CORE_MASK_HSW (0x7 | (0x07 << 16))
-
-#define GEN6_GT_PERF_STATUS	0x145948
-#define GEN6_RP_STATE_LIMITS	0x145994
-#define GEN6_RP_STATE_CAP	0x145998
-
 /*
  * Logical Context regs
  */
@@ -2942,21 +2649,6 @@
 
 #define SNB_FIFO_LINE_SIZE	64
 
-
-/* the address where we get all kinds of latency value */
-#define SSKPD			0x5d10
-#define SSKPD_WM_MASK		0x3f
-#define SSKPD_WM0_SHIFT		0
-#define SSKPD_WM1_SHIFT		8
-#define SSKPD_WM2_SHIFT		16
-#define SSKPD_WM3_SHIFT		24
-
-#define SNB_LATENCY(shift)	(I915_READ(MCHBAR_MIRROR_BASE_SNB + SSKPD) >> (shift) & SSKPD_WM_MASK)
-#define SNB_READ_WM0_LATENCY()		SNB_LATENCY(SSKPD_WM0_SHIFT)
-#define SNB_READ_WM1_LATENCY()		SNB_LATENCY(SSKPD_WM1_SHIFT)
-#define SNB_READ_WM2_LATENCY()		SNB_LATENCY(SSKPD_WM2_SHIFT)
-#define SNB_READ_WM3_LATENCY()		SNB_LATENCY(SSKPD_WM3_SHIFT)
-
 /*
  * The two pipe frame counter registers are not synchronized, so
  * reading a stable value is somewhat tricky. The following code