diff options
| author | Julius Werner <jwerner@chromium.org> | 2019-03-05 16:53:33 -0800 |
|---|---|---|
| committer | Patrick Georgi <pgeorgi@google.com> | 2019-03-08 08:33:24 +0000 |
| commit | cd49cce7b70e80b4acc49b56bb2bb94370b4d867 (patch) | |
| tree | 8e89136e2da7cf54453ba8c112eda94415b56242 /src/drivers/i2c/w83795 | |
| parent | b3a8cc54dbaf833c590a56f912209a5632b71f49 (diff) | |
coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Diffstat (limited to 'src/drivers/i2c/w83795')
| -rw-r--r-- | src/drivers/i2c/w83795/w83795.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c index 02b7c375a6..68696362ef 100644 --- a/src/drivers/i2c/w83795/w83795.c +++ b/src/drivers/i2c/w83795/w83795.c @@ -142,14 +142,14 @@ static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src) uint8_t val; uint16_t limit_value; -#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX_CHANNELS) +#if CONFIG(SMBUS_HAS_AUX_CHANNELS) uint8_t smbus_aux_channel_prev = smbus_get_current_channel(); smbus_switch_to_channel(config->smbus_aux); printk(BIOS_DEBUG, "Set SMBUS controller to channel %d\n", config->smbus_aux); #endif if (smbus_read_byte(dev, 0x00) < 0) { -#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX_CHANNELS) +#if CONFIG(SMBUS_HAS_AUX_CHANNELS) /* Restore SMBUS channel setting */ smbus_switch_to_channel(smbus_aux_channel_prev); printk(BIOS_DEBUG, "Set SMBUS controller to channel %d\n", smbus_aux_channel_prev); @@ -346,7 +346,7 @@ static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src) val |= W83795_REG_CONFIG_START; w83795_write(dev, W83795_REG_CONFIG, val); -#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX_CHANNELS) +#if CONFIG(SMBUS_HAS_AUX_CHANNELS) /* Restore SMBUS channel setting */ smbus_switch_to_channel(smbus_aux_channel_prev); printk(BIOS_DEBUG, "Set SMBUS controller to channel %d\n", smbus_aux_channel_prev); |