Revert "drivers/i2c/tpm/cr50: Support interrupts for status"

This reverts commit a5e419c51187d24818f056327746a18676fe3a20.

1 files changed, 8 insertions, 49 deletions

diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c
index d3c0efa2ac..37f0881980 100644
--- a/src/drivers/i2c/tpm/cr50.c
+++ b/src/drivers/i2c/tpm/cr50.c
@@ -41,9 +41,6 @@
 #include <timer.h>
 #include "tpm.h"
 
-#if IS_ENABLED(CONFIG_ARCH_X86)
-#include <arch/acpi.h>
-#endif
 
 #define CR50_MAX_BUFSIZE	63
 #define CR50_TIMEOUT_LONG_MS	2000	/* Long timeout while waiting for TPM */
@@ -58,26 +55,6 @@ struct tpm_inf_dev {
 
 static struct tpm_inf_dev g_tpm_dev CAR_GLOBAL;
 
-/* Wait for interrupt to indicate the TPM is ready */
-static int cr50_i2c_wait_tpm_ready(struct tpm_chip *chip)
-{
-	struct stopwatch sw;
-
-	if (!chip->vendor.irq_status) {
-		/* Fixed delay if interrupt not supported */
-		mdelay(CR50_TIMEOUT_SHORT_MS);
-		return 0;
-	}
-
-	stopwatch_init_msecs_expire(&sw, 10 * CR50_TIMEOUT_SHORT_MS);
-
-	while (!chip->vendor.irq_status(chip->vendor.irq))
-		if (stopwatch_expired(&sw))
-			return -1;
-
-	return 0;
-}
-
 /*
  * cr50_i2c_read() - read from TPM register
  *
@@ -100,10 +77,6 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr,
 	if (tpm_dev->addr == 0)
 		return -1;
 
-	/* Clear interrupt before starting transaction */
-	if (chip->vendor.irq_status)
-		chip->vendor.irq_status(chip->vendor.irq);
-
 	/* Send the register address byte to the TPM */
 	if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, &addr, 1)) {
 		printk(BIOS_ERR, "%s: Address write failed\n", __func__);
@@ -111,8 +84,7 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr,
 	}
 
 	/* Wait for TPM to be ready with response data */
-	if (cr50_i2c_wait_tpm_ready(chip) < 0)
-		return -1;
+	mdelay(CR50_TIMEOUT_SHORT_MS);
 
 	/* Read response data from the TPM */
 	if (i2c_read_raw(tpm_dev->bus, tpm_dev->addr, buffer, len)) {
@@ -151,10 +123,6 @@ static int cr50_i2c_write(struct tpm_chip *chip,
 	tpm_dev->buf[0] = addr;
 	memcpy(tpm_dev->buf + 1, buffer, len);
 
-	/* Clear interrupt before starting transaction */
-	if (chip->vendor.irq_status)
-		chip->vendor.irq_status(chip->vendor.irq);
-
 	/* Send write request buffer with address */
 	if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, tpm_dev->buf, len + 1)) {
 		printk(BIOS_ERR, "%s: Error writing to TPM\n", __func__);
@@ -162,7 +130,9 @@ static int cr50_i2c_write(struct tpm_chip *chip,
 	}
 
 	/* Wait for TPM to be ready */
-	return cr50_i2c_wait_tpm_ready(chip);
+	mdelay(CR50_TIMEOUT_SHORT_MS);
+
+	return 0;
 }
 
 static int check_locality(struct tpm_chip *chip, int loc)
@@ -410,7 +380,6 @@ static void cr50_vendor_init(struct tpm_chip *chip)
 	chip->vendor.recv = &cr50_i2c_tis_recv;
 	chip->vendor.send = &cr50_i2c_tis_send;
 	chip->vendor.cancel = &cr50_i2c_tis_ready;
-	chip->vendor.irq = CONFIG_DRIVER_TPM_I2C_IRQ;
 }
 
 int tpm_vendor_probe(unsigned bus, uint32_t addr)
@@ -465,18 +434,8 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
 
 	cr50_vendor_init(chip);
 
-	/*
-	 * Interrupts are not supported this early in firmware,
-	 * use use an arch-specific method to query for interrupt status.
-	 */
-	if (chip->vendor.irq > 0) {
-		if (IS_ENABLED(CONFIG_ARCH_X86)) {
-			/* Query GPE status for interrupt */
-			chip->vendor.irq_status = &acpi_get_gpe;
-		} else {
-			chip->vendor.irq = -1;
-		}
-	}
+	/* Disable interrupts (not supported) */
+	chip->vendor.irq = 0;
 
 	if (request_locality(chip, 0) != 0)
 		return -1;
@@ -490,8 +449,8 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
 		goto out_err;
 	}
 
-	printk(BIOS_DEBUG, "cr50 TPM 2.0 (i2c %u:0x%02x irq %d id 0x%x)\n",
-	       bus, dev_addr, chip->vendor.irq, vendor >> 16);
+	printk(BIOS_DEBUG, "cr50 TPM %u:%02x (device-id 0x%X)\n",
+	       tpm_dev->bus, tpm_dev->addr, vendor >> 16);
 
 	chip->is_open = 1;
 	return 0;