drivers/i2c/tpm/cr50: Support interrupts for status

Support reading the ACPI GPE status (on x86) to determine when
the cr50 is ready to return response data or is done processing
written data.  If the interrupt is not defined by Kconfig then
it will continue to use the safe delay.

This was tested with reef hardware and a modified cr50 image
that generates interrupts at the intended points.

BUG=chrome-os-partner:53336

Change-Id: I9f78f520fd089cb4471d8826a8cfecff67398bf8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>

1 files changed, 49 insertions, 8 deletions

diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c
index 37f0881980..d3c0efa2ac 100644
--- a/src/drivers/i2c/tpm/cr50.c
+++ b/src/drivers/i2c/tpm/cr50.c
@@ -41,6 +41,9 @@
 #include <timer.h>
 #include "tpm.h"
 
+#if IS_ENABLED(CONFIG_ARCH_X86)
+#include <arch/acpi.h>
+#endif
 
 #define CR50_MAX_BUFSIZE	63
 #define CR50_TIMEOUT_LONG_MS	2000	/* Long timeout while waiting for TPM */
@@ -55,6 +58,26 @@ struct tpm_inf_dev {
 
 static struct tpm_inf_dev g_tpm_dev CAR_GLOBAL;
 
+/* Wait for interrupt to indicate the TPM is ready */
+static int cr50_i2c_wait_tpm_ready(struct tpm_chip *chip)
+{
+	struct stopwatch sw;
+
+	if (!chip->vendor.irq_status) {
+		/* Fixed delay if interrupt not supported */
+		mdelay(CR50_TIMEOUT_SHORT_MS);
+		return 0;
+	}
+
+	stopwatch_init_msecs_expire(&sw, 10 * CR50_TIMEOUT_SHORT_MS);
+
+	while (!chip->vendor.irq_status(chip->vendor.irq))
+		if (stopwatch_expired(&sw))
+			return -1;
+
+	return 0;
+}
+
 /*
  * cr50_i2c_read() - read from TPM register
  *
@@ -77,6 +100,10 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr,
 	if (tpm_dev->addr == 0)
 		return -1;
 
+	/* Clear interrupt before starting transaction */
+	if (chip->vendor.irq_status)
+		chip->vendor.irq_status(chip->vendor.irq);
+
 	/* Send the register address byte to the TPM */
 	if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, &addr, 1)) {
 		printk(BIOS_ERR, "%s: Address write failed\n", __func__);
@@ -84,7 +111,8 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr,
 	}
 
 	/* Wait for TPM to be ready with response data */
-	mdelay(CR50_TIMEOUT_SHORT_MS);
+	if (cr50_i2c_wait_tpm_ready(chip) < 0)
+		return -1;
 
 	/* Read response data from the TPM */
 	if (i2c_read_raw(tpm_dev->bus, tpm_dev->addr, buffer, len)) {
@@ -123,6 +151,10 @@ static int cr50_i2c_write(struct tpm_chip *chip,
 	tpm_dev->buf[0] = addr;
 	memcpy(tpm_dev->buf + 1, buffer, len);
 
+	/* Clear interrupt before starting transaction */
+	if (chip->vendor.irq_status)
+		chip->vendor.irq_status(chip->vendor.irq);
+
 	/* Send write request buffer with address */
 	if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, tpm_dev->buf, len + 1)) {
 		printk(BIOS_ERR, "%s: Error writing to TPM\n", __func__);
@@ -130,9 +162,7 @@ static int cr50_i2c_write(struct tpm_chip *chip,
 	}
 
 	/* Wait for TPM to be ready */
-	mdelay(CR50_TIMEOUT_SHORT_MS);
-
-	return 0;
+	return cr50_i2c_wait_tpm_ready(chip);
 }
 
 static int check_locality(struct tpm_chip *chip, int loc)
@@ -380,6 +410,7 @@ static void cr50_vendor_init(struct tpm_chip *chip)
 	chip->vendor.recv = &cr50_i2c_tis_recv;
 	chip->vendor.send = &cr50_i2c_tis_send;
 	chip->vendor.cancel = &cr50_i2c_tis_ready;
+	chip->vendor.irq = CONFIG_DRIVER_TPM_I2C_IRQ;
 }
 
 int tpm_vendor_probe(unsigned bus, uint32_t addr)
@@ -434,8 +465,18 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
 
 	cr50_vendor_init(chip);
 
-	/* Disable interrupts (not supported) */
-	chip->vendor.irq = 0;
+	/*
+	 * Interrupts are not supported this early in firmware,
+	 * use use an arch-specific method to query for interrupt status.
+	 */
+	if (chip->vendor.irq > 0) {
+		if (IS_ENABLED(CONFIG_ARCH_X86)) {
+			/* Query GPE status for interrupt */
+			chip->vendor.irq_status = &acpi_get_gpe;
+		} else {
+			chip->vendor.irq = -1;
+		}
+	}
 
 	if (request_locality(chip, 0) != 0)
 		return -1;
@@ -449,8 +490,8 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
 		goto out_err;
 	}
 
-	printk(BIOS_DEBUG, "cr50 TPM %u:%02x (device-id 0x%X)\n",
-	       tpm_dev->bus, tpm_dev->addr, vendor >> 16);
+	printk(BIOS_DEBUG, "cr50 TPM 2.0 (i2c %u:0x%02x irq %d id 0x%x)\n",
+	       bus, dev_addr, chip->vendor.irq, vendor >> 16);
 
 	chip->is_open = 1;
 	return 0;