diff options
| author | Matt DeVillier <matt.devillier@gmail.com> | 2022-04-11 17:10:09 -0500 |
|---|---|---|
| committer | Paul Fagerburg <pfagerburg@chromium.org> | 2022-05-31 13:43:09 +0000 |
| commit | 57097130d5e4880e39ce8f63eba6f11d7c51e94c (patch) | |
| tree | d5c7f83ce9df41579c2adbe2dcaa0175342f4ed4 /src/drivers/i2c/designware | |
| parent | 1017a8fc5f60e6d819d9f3a165c1d4aef766cda0 (diff) | |
drivers/i2c/dw_i2c: Adjust to handle 0-byte transfers
0-byte writes can be used as a way to probe/check presence of an i2c
device, so adjust _dw_i2c_transfer() to immediately set the STOP bit
and raise logger level for TX abort messages when the segment length
is zero. Adjust dw_i2c_transfer() to allow zero-segment-length
messages to be passed thru to _dw_i2c_transfer().
Tested as part of entire i2c-detect patch train.
Change-Id: I518e849f4c476c264a1464886b1853af66c0b29d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Diffstat (limited to 'src/drivers/i2c/designware')
| -rw-r--r-- | src/drivers/i2c/designware/dw_i2c.c | 11 |
1 files changed, 8 insertions, 3 deletions
diff --git a/src/drivers/i2c/designware/dw_i2c.c b/src/drivers/i2c/designware/dw_i2c.c index 761fa914b4..fdedf63b56 100644 --- a/src/drivers/i2c/designware/dw_i2c.c +++ b/src/drivers/i2c/designware/dw_i2c.c @@ -358,6 +358,7 @@ static enum cb_err _dw_i2c_transfer(unsigned int bus, const struct i2c_msg *segm struct dw_i2c_regs *regs; size_t byte; enum cb_err ret = CB_ERR; + bool seg_zero_len = segments->len == 0; regs = (struct dw_i2c_regs *)dw_i2c_base_address(bus); if (!regs) { @@ -374,6 +375,10 @@ static enum cb_err _dw_i2c_transfer(unsigned int bus, const struct i2c_msg *segm dw_i2c_enable(regs); + if (seg_zero_len) + /* stop immediately */ + write32(®s->cmd_data, CMD_DATA_STOP); + /* Process each segment */ while (count--) { if (CONFIG(DRIVERS_I2C_DESIGNWARE_DEBUG)) { @@ -424,8 +429,8 @@ static enum cb_err _dw_i2c_transfer(unsigned int bus, const struct i2c_msg *segm /* Check TX abort */ if (read32(®s->raw_intr_stat) & INTR_STAT_TX_ABORT) { - printk(BIOS_ERR, "I2C TX abort detected (%08x)\n", - read32(®s->tx_abort_source)); + printk(seg_zero_len ? BIOS_SPEW : BIOS_ERR, "I2C TX abort detected (%08x)\n", + read32(®s->tx_abort_source)); /* clear INTR_STAT_TX_ABORT */ read32(®s->clear_tx_abrt_intr); goto out; @@ -462,7 +467,7 @@ static enum cb_err dw_i2c_transfer(unsigned int bus, const struct i2c_msg *msg, size_t start; uint16_t addr; - if (count == 0 || !msg) + if (!msg) return -1; /* Break up the transfers at the differing slave address boundary. */ |