drivers/crb: use crb_tpm_ prefix instead of tpm2_

This prevents name clashes with drivers/spi/tpm and allows both to be
potentially compiled in at the same time.

Change-Id: I0aa2686103546e0696ab8dcf77e2b99bf9734915
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>

3 files changed, 26 insertions, 26 deletions

diff --git a/src/drivers/crb/tis.c b/src/drivers/crb/tis.c
index 04e255aa7f..1b398f74f4 100644
--- a/src/drivers/crb/tis.c
+++ b/src/drivers/crb/tis.c
@@ -23,7 +23,7 @@ static const struct {
 	{0xa13a, 0x8086, "Intel iTPM"}
 };
 
-static const char *tis_get_dev_name(struct tpm2_info *info)
+static const char *tis_get_dev_name(struct crb_tpm_info *info)
 {
 	int i;
 
@@ -36,7 +36,7 @@ static const char *tis_get_dev_name(struct tpm2_info *info)
 static tpm_result_t crb_tpm_sendrecv(const uint8_t *sendbuf, size_t sbuf_size, uint8_t *recvbuf,
 				     size_t *rbuf_len)
 {
-	int len = tpm2_process_command(sendbuf, sbuf_size, recvbuf, *rbuf_len);
+	int len = crb_tpm_process_command(sendbuf, sbuf_size, recvbuf, *rbuf_len);
 
 	if (len == 0)
 		return TPM_CB_FAIL;
@@ -48,17 +48,17 @@ static tpm_result_t crb_tpm_sendrecv(const uint8_t *sendbuf, size_t sbuf_size, u
 
 tis_sendrecv_fn tis_probe(enum tpm_family *family)
 {
-	struct tpm2_info info;
+	struct crb_tpm_info info;
 
 	/* Wake TPM up (if necessary) */
-	if (tpm2_init())
+	if (crb_tpm_init())
 		return NULL;
 
 	/* CRB interface exists only in TPM2 */
 	if (family != NULL)
 		*family = TPM_2;
 
-	tpm2_get_info(&info);
+	crb_tpm_get_info(&info);
 
 	printk(BIOS_INFO, "Initialized TPM device %s revision %d\n", tis_get_dev_name(&info),
 	       info.revision);
@@ -137,7 +137,7 @@ static tpm_result_t tpm_get_cap(uint32_t property, uint32_t *value)
 
 static int smbios_write_type43_tpm(struct device *dev, int *handle, unsigned long *current)
 {
-	struct tpm2_info info;
+	struct crb_tpm_info info;
 	uint32_t tpm_manuf, tpm_family;
 	uint32_t fw_ver1, fw_ver2;
 	uint8_t major_spec_ver, minor_spec_ver;
@@ -145,7 +145,7 @@ static int smbios_write_type43_tpm(struct device *dev, int *handle, unsigned lon
 	if (tlcl_get_family() == TPM_1)
 		return 0;
 
-	tpm2_get_info(&info);
+	crb_tpm_get_info(&info);
 
 	/* If any of these have invalid values, assume TPM not present or disabled */
 	if (info.vendor_id == 0 || info.vendor_id == 0xFFFF ||
diff --git a/src/drivers/crb/tpm.c b/src/drivers/crb/tpm.c
index b568dcc7f4..ea5e7017fc 100644
--- a/src/drivers/crb/tpm.c
+++ b/src/drivers/crb/tpm.c
@@ -54,7 +54,7 @@ static void crb_readControlArea(void)
 	 * register before each command submission otherwise the control area
 	 * is all zeroed. This has been observed on Alder Lake S CPU and may be
 	 * applicable to other new microarchitectures. Update the local control
-	 * area data to make tpm2_process_command not fail on buffer checks.
+	 * area data to make crb_tpm_process_command() not fail on buffer checks.
 	 * PTT command/response buffer is fixed to be at offset 0x80 and spans
 	 * up to the end of 4KB region for the current locality.
 	 */
@@ -181,14 +181,14 @@ static tpm_result_t crb_switch_to_ready(void)
 }
 
 /*
- * tpm2_init
+ * crb_tpm_init
  *
  * Even though the TPM does not need an initialization we check
  * if the TPM responds and is in IDLE mode, which should be the
  * normal bring up mode.
  *
  */
-tpm_result_t tpm2_init(void)
+tpm_result_t crb_tpm_init(void)
 {
 	tpm_result_t rc = crb_probe();
 	if (rc) {
@@ -227,10 +227,10 @@ static void set_ptt_cmd_resp_buffers(void)
 }
 
 /*
- * tpm2_process_command
+ * crb_tpm_process_command
  */
-size_t tpm2_process_command(const void *tpm2_command, size_t command_size, void *tpm2_response,
-			    size_t max_response)
+size_t crb_tpm_process_command(const void *tpm2_command, size_t command_size,
+			       void *tpm2_response, size_t max_response)
 {
 	tpm_result_t rc;
 
@@ -312,24 +312,24 @@ size_t tpm2_process_command(const void *tpm2_command, size_t command_size, void
  * Returns information about the TPM
  *
  */
-void tpm2_get_info(struct tpm2_info *tpm2_info)
+void crb_tpm_get_info(struct crb_tpm_info *crb_tpm_info)
 {
 	uint64_t interfaceReg = read64(CRB_REG(cur_loc, CRB_REG_INTF_ID));
 
-	tpm2_info->vendor_id = (interfaceReg >> 48) & 0xFFFF;
-	tpm2_info->device_id = (interfaceReg >> 32) & 0xFFFF;
-	tpm2_info->revision = (interfaceReg >> 24) & 0xFF;
+	crb_tpm_info->vendor_id = (interfaceReg >> 48) & 0xFFFF;
+	crb_tpm_info->device_id = (interfaceReg >> 32) & 0xFFFF;
+	crb_tpm_info->revision = (interfaceReg >> 24) & 0xFF;
 }
 
 /*
- * tpm2_has_crb_active
+ * crb_tpm_is_active
  *
  * Checks that CRB interface is available and active.
  *
  * The body was derived from crb_probe() which unlike this function can also
  * write to registers.
  */
-bool tpm2_has_crb_active(void)
+bool crb_tpm_is_active(void)
 {
 	uint64_t tpmStatus = read64(CRB_REG(0, CRB_REG_INTF_ID));
 	printk(BIOS_SPEW, "Interface ID Reg. %llx\n", tpmStatus);
diff --git a/src/drivers/crb/tpm.h b/src/drivers/crb/tpm.h
index 60020c3ff9..fbe390167d 100644
--- a/src/drivers/crb/tpm.h
+++ b/src/drivers/crb/tpm.h
@@ -53,15 +53,15 @@
 /* START Register related */
 #define CRB_REG_START_START			0x01
 
-/* TPM Info Struct */
-struct tpm2_info {
+/* CRB TPM Info Struct */
+struct crb_tpm_info {
 	uint16_t vendor_id;
 	uint16_t device_id;
 	uint16_t revision;
 };
 
-tpm_result_t tpm2_init(void);
-void tpm2_get_info(struct tpm2_info *tpm2_info);
-size_t tpm2_process_command(const void *tpm2_command, size_t command_size,
-			    void *tpm2_response, size_t max_response);
-bool tpm2_has_crb_active(void);
+tpm_result_t crb_tpm_init(void);
+void crb_tpm_get_info(struct crb_tpm_info *crb_tpm_info);
+size_t crb_tpm_process_command(const void *tpm2_command, size_t command_size,
+			       void *tpm2_response, size_t max_response);
+bool crb_tpm_is_active(void);