Some changes required to get yabel working on v2 (and they generally make

sense, too). Have one u64 instead of three.

In order to use the old bios emulator, you have to do nothing. (Default, if
CONFIG_PCI_ROM_RUN is enabled)

In order to use yabel in your target, you need to add the following lines to
your config:
  uses CONFIG_PCI_OPTION_ROM_RUN_YABEL
  default CONFIG_PCI_OPTION_ROM_RUN_YABEL=1

In order to use vm86 in your target, you need to add the following lines to
your config:
  uses CONFIG_PCI_OPTION_ROM_RUN_VM86
  default CONFIG_PCI_OPTION_ROM_RUN_VM86=1
Note: vm86 only works on platforms with _RAMBASE in the lower megabyte.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Joseph Smith <joe@settoplinux.org>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 225 deletions

diff --git a/src/devices/emulator/x86emu/debug.h b/src/devices/emulator/x86emu/debug.h
deleted file mode 100644
index 882e92dfcb..0000000000
--- a/src/devices/emulator/x86emu/debug.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/****************************************************************************
-*
-*						Realmode X86 Emulator Library
-*
-*            	Copyright (C) 1996-1999 SciTech Software, Inc.
-* 				     Copyright (C) David Mosberger-Tang
-* 					   Copyright (C) 1999 Egbert Eich
-*
-*  ========================================================================
-*
-*  Permission to use, copy, modify, distribute, and sell this software and
-*  its documentation for any purpose is hereby granted without fee,
-*  provided that the above copyright notice appear in all copies and that
-*  both that copyright notice and this permission notice appear in
-*  supporting documentation, and that the name of the authors not be used
-*  in advertising or publicity pertaining to distribution of the software
-*  without specific, written prior permission.  The authors makes no
-*  representations about the suitability of this software for any purpose.
-*  It is provided "as is" without express or implied warranty.
-*
-*  THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-*  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-*  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-*  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
-*  USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
-*  OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-*  PERFORMANCE OF THIS SOFTWARE.
-*
-*  ========================================================================
-*
-* Language:		ANSI C
-* Environment:	Any
-* Developer:    Kendall Bennett
-*
-* Description:  Header file for debug definitions.
-*
-****************************************************************************/
-/* $XFree86: xc/extras/x86emu/src/x86emu/x86emu/debug.h,v 1.4 2000/11/21 23:10:27 tsi Exp $ */
-
-#ifndef __X86EMU_DEBUG_H
-#define __X86EMU_DEBUG_H
-
-#if defined(DEBUG) && (DEBUG == 0)
-#undef DEBUG
-#endif
-
-/*---------------------- Macros and type definitions ----------------------*/
-
-/* checks to be enabled for "runtime" */
-
-#define CHECK_IP_FETCH_F                0x1
-#define CHECK_SP_ACCESS_F               0x2
-#define CHECK_MEM_ACCESS_F              0x4 /*using regular linear pointer */
-#define CHECK_DATA_ACCESS_F             0x8 /*using segment:offset*/
-
-#ifdef DEBUG
-# define CHECK_IP_FETCH()              	(M.x86.check & CHECK_IP_FETCH_F)
-# define CHECK_SP_ACCESS()             	(M.x86.check & CHECK_SP_ACCESS_F)
-# define CHECK_MEM_ACCESS()            	(M.x86.check & CHECK_MEM_ACCESS_F)
-# define CHECK_DATA_ACCESS()           	(M.x86.check & CHECK_DATA_ACCESS_F)
-#else
-# define CHECK_IP_FETCH()
-# define CHECK_SP_ACCESS()
-# define CHECK_MEM_ACCESS()
-# define CHECK_DATA_ACCESS()
-#endif
-
-#ifdef DEBUG
-# define DEBUG_INSTRUMENT()    	(M.x86.debug & DEBUG_INSTRUMENT_F)
-# define DEBUG_DECODE()        	(M.x86.debug & DEBUG_DECODE_F)
-# define DEBUG_TRACE()         	(M.x86.debug & DEBUG_TRACE_F)
-# define DEBUG_STEP()          	(M.x86.debug & DEBUG_STEP_F)
-# define DEBUG_DISASSEMBLE()   	(M.x86.debug & DEBUG_DISASSEMBLE_F)
-# define DEBUG_BREAK()         	(M.x86.debug & DEBUG_BREAK_F)
-# define DEBUG_SVC()           	(M.x86.debug & DEBUG_SVC_F)
-# define DEBUG_SAVE_IP_CS()     (M.x86.debug & DEBUG_SAVE_IP_CS_F)
-
-# define DEBUG_FS()            	(M.x86.debug & DEBUG_FS_F)
-# define DEBUG_PROC()          	(M.x86.debug & DEBUG_PROC_F)
-# define DEBUG_SYSINT()        	(M.x86.debug & DEBUG_SYSINT_F)
-# define DEBUG_TRACECALL()     	(M.x86.debug & DEBUG_TRACECALL_F)
-# define DEBUG_TRACECALLREGS() 	(M.x86.debug & DEBUG_TRACECALL_REGS_F)
-# define DEBUG_TRACEJMP()       (M.x86.debug & DEBUG_TRACEJMP_F)
-# define DEBUG_TRACEJMPREGS()   (M.x86.debug & DEBUG_TRACEJMP_REGS_F)
-# define DEBUG_SYS()           	(M.x86.debug & DEBUG_SYS_F)
-# define DEBUG_MEM_TRACE()     	(M.x86.debug & DEBUG_MEM_TRACE_F)
-# define DEBUG_IO_TRACE()      	(M.x86.debug & DEBUG_IO_TRACE_F)
-# define DEBUG_DECODE_NOPRINT() (M.x86.debug & DEBUG_DECODE_NOPRINT_F)
-#else
-# define DEBUG_INSTRUMENT()    	0
-# define DEBUG_DECODE()        	0
-# define DEBUG_TRACE()         	0
-# define DEBUG_STEP()          	0
-# define DEBUG_DISASSEMBLE()   	0
-# define DEBUG_BREAK()         	0
-# define DEBUG_SVC()           	0
-# define DEBUG_SAVE_IP_CS()     0
-# define DEBUG_FS()            	0
-# define DEBUG_PROC()          	0
-# define DEBUG_SYSINT()        	0
-# define DEBUG_TRACECALL()     	0
-# define DEBUG_TRACECALLREGS() 	0
-# define DEBUG_TRACEJMP()       0
-# define DEBUG_TRACEJMPREGS()   0
-# define DEBUG_SYS()           	0
-# define DEBUG_MEM_TRACE()     	0
-# define DEBUG_IO_TRACE()      	0
-# define DEBUG_DECODE_NOPRINT() 0
-#endif
-
-#ifdef DEBUG
-
-# define DECODE_PRINTF(x)     	if (DEBUG_DECODE()) \
-									x86emu_decode_printf(x)
-# define DECODE_PRINTF2(x,y)  	if (DEBUG_DECODE()) \
-									x86emu_decode_printf2(x,y)
-
-/*
- * The following allow us to look at the bytes of an instruction.  The
- * first INCR_INSTRN_LEN, is called everytime bytes are consumed in
- * the decoding process.  The SAVE_IP_CS is called initially when the
- * major opcode of the instruction is accessed.
- */
-#define INC_DECODED_INST_LEN(x)                    	\
-	if (DEBUG_DECODE())  	                       	\
-		x86emu_inc_decoded_inst_len(x)
-
-#define SAVE_IP_CS(x,y)                               			\
-	if (DEBUG_DECODE() | DEBUG_TRACECALL() | DEBUG_BREAK() \
-              | DEBUG_IO_TRACE() | DEBUG_SAVE_IP_CS()) { \
-		M.x86.saved_cs = x;                          			\
-		M.x86.saved_ip = y;                          			\
-	}
-#else
-# define INC_DECODED_INST_LEN(x)
-# define DECODE_PRINTF(x)
-# define DECODE_PRINTF2(x,y)
-# define SAVE_IP_CS(x,y)
-#endif
-
-#ifdef DEBUG
-#define TRACE_REGS()                                   		\
-	if (DEBUG_DISASSEMBLE()) {                         		\
-		x86emu_just_disassemble();                        	\
-		goto EndOfTheInstructionProcedure;             		\
-	}                                                   	\
-	if (DEBUG_TRACE() || DEBUG_DECODE()) X86EMU_trace_regs()
-#else
-# define TRACE_REGS()
-#endif
-
-#ifdef DEBUG
-# define SINGLE_STEP()		if (DEBUG_STEP()) x86emu_single_step()
-#else
-# define SINGLE_STEP()
-#endif
-
-#define TRACE_AND_STEP()	\
-	TRACE_REGS();			\
-	SINGLE_STEP()
-
-#ifdef DEBUG
-# define START_OF_INSTR()
-# define END_OF_INSTR()		EndOfTheInstructionProcedure: x86emu_end_instr();
-# define END_OF_INSTR_NO_TRACE()	x86emu_end_instr();
-#else
-# define START_OF_INSTR()
-# define END_OF_INSTR()
-# define END_OF_INSTR_NO_TRACE()
-#endif
-
-#ifdef DEBUG
-# define  CALL_TRACE(u,v,w,x,s)                                 \
-	if (DEBUG_TRACECALLREGS())									\
-		x86emu_dump_regs();                                     \
-	if (DEBUG_TRACECALL())                                     	\
-		printk("%04x:%04x: CALL %s%04x:%04x\n", u , v, s, w, x);
-# define RETURN_TRACE(u,v,w,x,s)                                    \
-	if (DEBUG_TRACECALLREGS())									\
-		x86emu_dump_regs();                                     \
-	if (DEBUG_TRACECALL())                                     	\
-		printk("%04x:%04x: RET %s %04x:%04x\n",u,v,s,w,x);
-# define  JMP_TRACE(u,v,w,x,s)                                 \
-   if (DEBUG_TRACEJMPREGS()) \
-      x86emu_dump_regs(); \
-   if (DEBUG_TRACEJMP()) \
-      printk("%04x:%04x: JMP %s%04x:%04x\n", u , v, s, w, x);
-#else
-# define CALL_TRACE(u,v,w,x,s)
-# define RETURN_TRACE(u,v,w,x,s)
-# define  JMP_TRACE(u,v,w,x,s)
-#endif
-
-#ifdef DEBUG
-#define	DB(x)	x
-#else
-#define	DB(x)
-#endif
-
-/*-------------------------- Function Prototypes --------------------------*/
-
-#ifdef  __cplusplus
-extern "C" {            			/* Use "C" linkage when in C++ mode */
-#endif
-
-extern void x86emu_inc_decoded_inst_len (int x);
-extern void x86emu_decode_printf (char *x);
-extern void x86emu_decode_printf2 (char *x, int y);
-extern void x86emu_just_disassemble (void);
-extern void x86emu_single_step (void);
-extern void x86emu_end_instr (void);
-extern void x86emu_dump_regs (void);
-extern void x86emu_dump_xregs (void);
-extern void x86emu_print_int_vect (u16 iv);
-extern void x86emu_instrument_instruction (void);
-extern void x86emu_check_ip_access (void);
-extern void x86emu_check_sp_access (void);
-extern void x86emu_check_mem_access (u32 p);
-extern void x86emu_check_data_access (uint s, uint o);
-
-#ifdef  __cplusplus
-}                       			/* End of "C" linkage for C++   	*/
-#endif
-
-#endif /* __X86EMU_DEBUG_H */