summaryrefslogtreecommitdiff
path: root/src/cpu
diff options
context:
space:
mode:
authorDavid Hendricks <dhendrix@chromium.org>2013-08-09 18:19:29 -0700
committerIsaac Christensen <isaac.christensen@se-eng.com>2014-08-05 18:43:42 +0200
commitb77431336e44ba9721f18220e2a7dedafe250528 (patch)
tree38d92f7fdb659b5ae00cb64a6a0d62d78f11ffb4 /src/cpu
parent18fe07ed22e81c6315c199d5ae71b689163bac46 (diff)
exynos5420: get rid of old exynos5420_config_l2_cache()
We set up L2 cache early in romstage now so the old function is now redundant. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: Icec93810ddd7feb48286d4b600cb2d58af38b7ef Reviewed-on: https://gerrit.chromium.org/gerrit/65428 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit bb91f1078ea55a7c8bdc19336cef2ec9a5f4511f) exynos: stack size: Increase the stack size to 16KB. The lzma decoding function in the RAM stage allocates nearly 16KB on the stack which is shared between the bootblock, rom stage, and ram stage. The stack had been much too small and needed to be expanded. Old-Change-Id: I1b74fff9b54e506320d58956b779b3a102e66868 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65937 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 243d8a80f68dd257ecc5b4e19614bc7f0f5d398b) exynos: gpio: add a bigger delay when reading board strappings Z-state pins were not reading reliably with a 5us delay, so increase it to 15us. This is ported from https://gerrit.chromium.org/gerrit/64338 Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: Ife6ea2ef5989e1a4c17913278ab972f0fd7f7f35 Reviewed-on: https://gerrit.chromium.org/gerrit/65727 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 76f0f8203f1af3f461745cefcc94e97c422d9084) exynos5420: enable DMC internal clock gating lets enable memory controller internal clock gating for ddr3. with these bits enabled we save some power out of ddr3. This is ported from https://gerrit.chromium.org/gerrit/#/c/60774 Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I2f9b0d78483b3ea7441f54a715c7c1e42eda3f7f Reviewed-on: https://gerrit.chromium.org/gerrit/65728 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 022a81c44e655a9f81e974e730c0cecc1f048781) exynos5420: Correct the 600MHz PMS value In UM ver0.02, 600MHz clock PMS values differs from what is programed currently. Though this also results in 600MHz clock, but it is better to match what UM says. This patch chnage this as per UM This is ported from https://gerrit.chromium.org/gerrit/#/c/65106/3 (Note: we already used the correct 600MHz value for KPLL) Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I6786815ab33427a23436e6ee37295f6c37dcd3d5 Reviewed-on: https://gerrit.chromium.org/gerrit/65726 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit ceabf57ca78449fa6e9cfd212bdf4774706de92f) Squashed five commits pertaining to exynos. Change-Id: I3fd894aed15b8cd161c30904a46dac7e07eb8992 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6425 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Diffstat (limited to 'src/cpu')
-rw-r--r--src/cpu/samsung/exynos5250/Kconfig8
-rw-r--r--src/cpu/samsung/exynos5420/Kconfig18
-rw-r--r--src/cpu/samsung/exynos5420/clock_init.c2
-rw-r--r--src/cpu/samsung/exynos5420/cpu.c30
-rw-r--r--src/cpu/samsung/exynos5420/cpu.h1
-rw-r--r--src/cpu/samsung/exynos5420/dmc_init_ddr3.c8
-rw-r--r--src/cpu/samsung/exynos5420/gpio.c4
-rw-r--r--src/cpu/samsung/exynos5420/setup.h8
-rw-r--r--src/cpu/samsung/exynos5420/smp.c5
9 files changed, 36 insertions, 48 deletions
diff --git a/src/cpu/samsung/exynos5250/Kconfig b/src/cpu/samsung/exynos5250/Kconfig
index 91b691d3e6..e0e179dd64 100644
--- a/src/cpu/samsung/exynos5250/Kconfig
+++ b/src/cpu/samsung/exynos5250/Kconfig
@@ -69,21 +69,21 @@ config STACK_TOP
config STACK_BOTTOM
hex
- default 0x02077000
+ default 0x02074000
config STACK_SIZE
hex
- default 0x1000
+ default 0x4000
# TODO We may probably move this to board-specific implementation files instead
# of KConfig values.
config CBFS_CACHE_ADDRESS
hex "memory address to put CBFS cache data"
- default 0x02060000
+ default 0x0205c000
config CBFS_CACHE_SIZE
hex "size of CBFS cache data"
- default 0x000017000
+ default 0x00018000
config SYS_SDRAM_BASE
hex
diff --git a/src/cpu/samsung/exynos5420/Kconfig b/src/cpu/samsung/exynos5420/Kconfig
index 606604091b..d3eafcba75 100644
--- a/src/cpu/samsung/exynos5420/Kconfig
+++ b/src/cpu/samsung/exynos5420/Kconfig
@@ -46,12 +46,12 @@ config CBFS_ROM_OFFSET
# 0x0202_4400: variable length bootblock checksum header.
# 0x0202_4410: bootblock, assume up to 32KB in size
# 0x0203_0000: romstage, assume up to 128KB in size.
-# 0x0206_0000: cache for CBFS data.
+# 0x0205_c000: cache for CBFS data.
+# 0x0206_f000: stack bottom
+# 0x0207_3000: stack pointer
# 0x0207_3000: shared (with kernel) page for cpu & secondary core states.
# the shared data is currently only <0x50 bytes so we can share
# this page with stack.
-# 0x0207_3100: stack bottom
-# 0x0207_4000: stack pointer
config BOOTBLOCK_BASE
hex
@@ -63,7 +63,7 @@ config ROMSTAGE_BASE
config ROMSTAGE_SIZE
hex
- default 0x10000
+ default 0x20000
# Stack may reside in either IRAM or DRAM. We will define it to live
# at the top of IRAM for now.
@@ -72,25 +72,25 @@ config ROMSTAGE_SIZE
# consecutive memory locations ending just below SP
config STACK_TOP
hex
- default 0x02074000
+ default 0x02073000
config STACK_BOTTOM
hex
- default 0x02073100
+ default 0x0206f000
config STACK_SIZE
hex
- default 0x0f00
+ default 0x4000
# TODO We may probably move this to board-specific implementation files instead
# of KConfig values.
config CBFS_CACHE_ADDRESS
hex "memory address to put CBFS cache data"
- default 0x02060000
+ default 0x0205c000
config CBFS_CACHE_SIZE
hex "size of CBFS cache data"
- default 0x000013000
+ default 0x00013000
config SYS_SDRAM_BASE
hex
diff --git a/src/cpu/samsung/exynos5420/clock_init.c b/src/cpu/samsung/exynos5420/clock_init.c
index 658b2559e8..eeeda90bf2 100644
--- a/src/cpu/samsung/exynos5420/clock_init.c
+++ b/src/cpu/samsung/exynos5420/clock_init.c
@@ -81,7 +81,7 @@ void system_clock_init(void)
/* Set KPLL*/
writel(KPLL_CON1_VAL, &clk->kpll_con1);
- val = set_pll(0xc8, 0x2, 0x2);
+ val = set_pll(0x190, 0x4, 0x2);
writel(val, &clk->kpll_con0);
while ((readl(&clk->kpll_con0) & PLL_LOCKED) == 0)
;
diff --git a/src/cpu/samsung/exynos5420/cpu.c b/src/cpu/samsung/exynos5420/cpu.c
index 176a3f2595..3b87c6e0ee 100644
--- a/src/cpu/samsung/exynos5420/cpu.c
+++ b/src/cpu/samsung/exynos5420/cpu.c
@@ -206,33 +206,3 @@ struct chip_operations cpu_samsung_exynos5420_ops = {
CHIP_NAME("CPU Samsung Exynos 5420")
.enable_dev = enable_exynos5420_dev,
};
-
-void exynos5420_config_l2_cache(void)
-{
- uint32_t val;
-
- /*
- * Bit 9 - L2 tag RAM setup (1 cycle)
- * Bits 8:6 - L2 tag RAM latency (3 cycles)
- * Bit 5 - L2 data RAM setup (1 cycle)
- * Bits 2:0 - L2 data RAM latency (3 cycles)
- */
- val = (1 << 9) | (0x2 << 6) | (1 << 5) | (0x2);
- write_l2ctlr(val);
-
- val = read_l2actlr();
-
- /* L2ACTLR[3]: Disable clean/evict push to external */
- val |= (1 << 3);
-
- /* L2ACTLR[7]: Enable hazard detect timeout for A15 */
- val |= (1 << 7);
-
- /* L2ACTLR[27]: Prevents stopping the L2 logic clock */
- val |= (1 << 27);
-
- write_l2actlr(val);
-
- /* Read the l2 control register to force things to take effect? */
- val = read_l2ctlr();
-}
diff --git a/src/cpu/samsung/exynos5420/cpu.h b/src/cpu/samsung/exynos5420/cpu.h
index 08f315a57d..8d3d48bda4 100644
--- a/src/cpu/samsung/exynos5420/cpu.h
+++ b/src/cpu/samsung/exynos5420/cpu.h
@@ -263,7 +263,6 @@ static inline u32 get_fb_base_kb(void)
}
/* Procedures to setup Exynos5420 CPU */
-void exynos5420_config_l2_cache(void);
void exynos5420_config_smp(void);
#endif /* _EXYNOS5420_CPU_H */
diff --git a/src/cpu/samsung/exynos5420/dmc_init_ddr3.c b/src/cpu/samsung/exynos5420/dmc_init_ddr3.c
index ebfe1e1a0f..6c431f374f 100644
--- a/src/cpu/samsung/exynos5420/dmc_init_ddr3.c
+++ b/src/cpu/samsung/exynos5420/dmc_init_ddr3.c
@@ -376,5 +376,13 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
&drex1->concontrol);
+
+ /* Enable Clock Gating Control for DMC
+ * this saves around 25 mw dmc power as compared to the power
+ * consumption without these bits enabled
+ */
+ setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
+ setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);
+
return 0;
}
diff --git a/src/cpu/samsung/exynos5420/gpio.c b/src/cpu/samsung/exynos5420/gpio.c
index 2a93328a70..b17ff40d55 100644
--- a/src/cpu/samsung/exynos5420/gpio.c
+++ b/src/cpu/samsung/exynos5420/gpio.c
@@ -206,10 +206,10 @@ int gpio_set_value(unsigned gpio, int value)
/*
* Add a delay here to give the lines time to settle
- * TODO(sjg): 1us does not always work, 2 is stable, so use 5 to be safe
+ * TODO(dianders): 5us does not always work, 10 is stable, so use 15 to be safe
* Come back to this and sort out what the datasheet says
*/
-#define GPIO_DELAY_US 5
+#define GPIO_DELAY_US 15
#ifndef __BOOT_BLOCK__
/*
diff --git a/src/cpu/samsung/exynos5420/setup.h b/src/cpu/samsung/exynos5420/setup.h
index 794d4e14df..8f14a91602 100644
--- a/src/cpu/samsung/exynos5420/setup.h
+++ b/src/cpu/samsung/exynos5420/setup.h
@@ -791,6 +791,14 @@ struct exynos5_phy_control;
#define BRBRSVCONTROL_VAL 0x00000033
#define BRBRSVCONFIG_VAL 0x88778877
+/* Clock Gating Control (CGCONTROL) register */
+#define MEMIF_CG_EN (1 << 3) /* Memory interface clock gating */
+#define SCG_CG_EN (1 << 2) /* Scheduler clock gating */
+#define BUSIF_WR_CG_EN (1 << 1) /* Bus interface write channel clock gating */
+#define BUSIF_RD_CG_EN (1 << 0) /* Bus interface read channel clock gating */
+#define DMC_INTERNAL_CG (MEMIF_CG_EN | SCG_CG_EN | \
+ BUSIF_WR_CG_EN | BUSIF_RD_CG_EN)
+
/* DMC PHY Control0 register */
#define PHY_CONTROL0_RESET_VAL 0x0
#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */
diff --git a/src/cpu/samsung/exynos5420/smp.c b/src/cpu/samsung/exynos5420/smp.c
index 392f82d097..2a0656bcaf 100644
--- a/src/cpu/samsung/exynos5420/smp.c
+++ b/src/cpu/samsung/exynos5420/smp.c
@@ -271,7 +271,10 @@ static void power_down_core(void)
/* Configures the CPU states shard memory page and then shutdown all cores. */
static void configure_secondary_cores(void)
{
- configure_l2ctlr();
+ if (get_bits(read_midr(), 4, 12) == PART_NUMBER_CORTEX_A15) {
+ configure_l2ctlr();
+ configure_l2actlr();
+ }
/* Currently we use power_down_core as callback for each core to
* shutdown itself, but it is also ok to directly set ARM_CORE*_CONFIG