armv7: Move Exynos from 'cpu' to 'soc'.

The Exynos family and most ARM products are SoC, not just CPU.

We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.

Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 0 insertions, 183 deletions

diff --git a/src/cpu/samsung/exynos5420/cpu.c b/src/cpu/samsung/exynos5420/cpu.c
deleted file mode 100644
index bfb8421910..0000000000
--- a/src/cpu/samsung/exynos5420/cpu.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2013 Google Inc.
- * Copyright (C) 2012 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <stddef.h>
-#include <delay.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <cbmem.h>
-#include <arch/cache.h>
-#include "dp.h"
-#include "fimd.h"
-#include "cpu.h"
-#include "clk.h"
-#include "chip.h"
-
-#include <ec/google/chromeec/ec.h>
-
-static unsigned int cpu_id;
-static unsigned int cpu_rev;
-
-static void set_cpu_id(void)
-{
-	u32 pro_id = (read32((void *)EXYNOS5_PRO_ID) & 0x00FFF000) >> 12;
-
-	switch (pro_id) {
-	case 0x200:
-		/* Exynos4210 EVT0 */
-		cpu_id = 0x4210;
-		cpu_rev = 0;
-		break;
-	case 0x210:
-		/* Exynos4210 EVT1 */
-		cpu_id = 0x4210;
-		break;
-	case 0x412:
-		/* Exynos4412 */
-		cpu_id = 0x4412;
-		break;
-	case 0x520:
-		/* Exynos5250 */
-		cpu_id = 0x5250;
-		break;
-	case 0x420:
-		/* Exynos5420 */
-		cpu_id = 0x5420;
-		break;
-	}
-}
-
-/* we distinguish a display port device from a raw graphics device
- * because there are dramatic differences in startup depending on
- * graphics usage. To make startup fast and easier to understand and
- * debug we explicitly name this common case. The alternate approach,
- * involving lots of machine and callbacks, is hard to debug and
- * verify.
- */
-static void exynos_displayport_init(device_t dev, u32 lcdbase,
-		unsigned long fb_size)
-{
-	struct cpu_samsung_exynos5420_config *conf = dev->chip_info;
-	/* put these on the stack. If, at some point, we want to move
-	 * this code to a pre-ram stage, it will be much easier.
-	 */
-	struct exynos5_fimd_panel panel;
-	memset(&panel, 0, sizeof(panel));
-
-	panel.is_dp = 1; /* Display I/F is eDP */
-	/* while it is true that we did a memset to zero,
-	 * we leave some 'set to zero' entries here to make
-	 * it clear what's going on. Graphics is confusing.
-	 */
-	panel.is_mipi = 0;
-	panel.fixvclk = 0;
-	panel.ivclk = 0;
-	panel.clkval_f = conf->clkval_f;
-	panel.upper_margin = conf->upper_margin;
-	panel.lower_margin = conf->lower_margin;
-	panel.vsync = conf->vsync;
-	panel.left_margin = conf->left_margin;
-	panel.right_margin = conf->right_margin;
-	panel.hsync = conf->hsync;
-	panel.xres = conf->xres;
-	panel.yres = conf->yres;
-
-	printk(BIOS_SPEW, "LCD framebuffer @%p\n", (void *)(lcdbase));
-	memset((void *)lcdbase, 0, fb_size);	/* clear the framebuffer */
-
-	/*
-	 * We need to clean and invalidate the framebuffer region and disable
-	 * caching as well. We assume that our dcache <--> memory address
-	 * space is identity-mapped in 1MB chunks, so align accordingly.
-	 *
-	 * Note: We may want to do something clever to ensure the framebuffer
-	 * region is aligned such that we don't change dcache policy for other
-	 * stuff inadvertantly.
-	 */
-	uint32_t lower = ALIGN_DOWN(lcdbase, MiB);
-	uint32_t upper = ALIGN_UP(lcdbase + fb_size, MiB);
-
-	dcache_clean_invalidate_by_mva(lower, upper - lower);
-	mmu_config_range(lower / MiB, (upper - lower) / MiB, DCACHE_OFF);
-
-	mmio_resource(dev, 1, lcdbase/KiB, CEIL_DIV(fb_size, KiB));
-}
-
-static void tps65090_thru_ec_fet_disable(int index)
-{
-	uint8_t value = 0;
-
-	if (google_chromeec_i2c_xfer(0x48, 0xe + index, 1, &value, 1, 0)) {
-		printk(BIOS_ERR,
-		       "Error sending i2c pass through command to EC.\n");
-		return;
-	}
-}
-
-static void cpu_enable(device_t dev)
-{
-	unsigned long fb_size = FB_SIZE_KB * KiB;
-	u32 lcdbase = get_fb_base_kb() * KiB;
-
-	ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB - FB_SIZE_KB);
-	mmio_resource(dev, 1, lcdbase / KiB, CEIL_DIV(fb_size, KiB));
-
-	/*
-	 * Disable LCD FETs before we do anything with the display.
-	 * FIXME(dhendrix): This is a gross hack and should be done
-	 * elsewhere (romstage?).
-	 */
-	tps65090_thru_ec_fet_disable(1);
-	tps65090_thru_ec_fet_disable(6);
-
-	exynos_displayport_init(dev, lcdbase, fb_size);
-
-	set_cpu_id();
-}
-
-static void cpu_init(device_t dev)
-{
-	printk(BIOS_INFO, "CPU:   S5P%X @ %ldMHz\n",
-			cpu_id, get_arm_clk() / 1000000);
-}
-
-static void cpu_noop(device_t dev)
-{
-}
-
-static struct device_operations cpu_ops = {
-	.read_resources   = cpu_noop,
-	.set_resources    = cpu_noop,
-	.enable_resources = cpu_enable,
-	.init             = cpu_init,
-	.scan_bus         = 0,
-};
-
-static void enable_exynos5420_dev(device_t dev)
-{
-	dev->ops = &cpu_ops;
-}
-
-struct chip_operations cpu_samsung_exynos5420_ops = {
-	CHIP_NAME("CPU Samsung Exynos 5420")
-	.enable_dev = enable_exynos5420_dev,
-};