Exynos5250: Initialize USB PHY

... this is needed for libpayload to talk to USB devices.

Change-Id: I7eb19003c9e96efb5fa7a3f97c7b15f3ef332687
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3696
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 105 insertions, 0 deletions

diff --git a/src/cpu/samsung/exynos5250/usb.c b/src/cpu/samsung/exynos5250/usb.c
new file mode 100644
index 0000000000..d8e07da080
--- /dev/null
+++ b/src/cpu/samsung/exynos5250/usb.c
@@ -0,0 +1,105 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "gpio.h"
+#include "power.h"
+#include "cpu.h"
+#include "usb.h"
+#include "chip.h"
+
+/* Enable VBUS */
+static int usb_vbus_init(int vbus_gpio)
+{
+	/* Enable VBUS power switch */
+	gpio_direction_output(GPIO_X11, 1);
+	/* VBUS turn ON time */
+	mdelay(3);
+
+	return 0;
+}
+
+/* Setup the EHCI host controller. */
+
+static void setup_usb_phy(struct usb_phy *usb, int hsic_gpio)
+{
+	unsigned int hostphy_ctrl0;
+
+	power_enable_usb_phy();
+
+	/* Setting up host and device simultaneously */
+	hostphy_ctrl0 = readl(&usb->usbphyctrl0);
+	hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK | HOST_CTRL0_COMMONON_N |
+			   /* HOST Phy setting */
+			   HOST_CTRL0_PHYSWRST |
+			   HOST_CTRL0_PHYSWRSTALL |
+			   HOST_CTRL0_SIDDQ |
+			   HOST_CTRL0_FORCESUSPEND |
+			   HOST_CTRL0_FORCESLEEP);
+	hostphy_ctrl0 |= (	/* Setting up the ref freq */
+				 CLK_24MHZ << 16 |
+				 /* HOST Phy setting */
+				 HOST_CTRL0_LINKSWRST |
+				 HOST_CTRL0_UTMISWRST);
+	writel(hostphy_ctrl0, &usb->usbphyctrl0);
+	udelay(10);
+	clrbits_le32(&usb->usbphyctrl0,
+		     HOST_CTRL0_LINKSWRST | HOST_CTRL0_UTMISWRST);
+	udelay(20);
+
+	/* EHCI Ctrl setting */
+	setbits_le32(&usb->ehcictrl,
+		     EHCICTRL_ENAINCRXALIGN |
+		     EHCICTRL_ENAINCR4 |
+		     EHCICTRL_ENAINCR8 | EHCICTRL_ENAINCR16);
+
+	/* HSIC USB Hub initialization. */
+	// FIXME board specific?
+	gpio_direction_output(hsic_gpio, 0);
+	udelay(100);
+	gpio_direction_output(hsic_gpio, 1);
+	udelay(5000);
+
+	clrbits_le32(&usb->hsicphyctrl1,
+		     HOST_CTRL0_SIDDQ |
+		     HOST_CTRL0_FORCESLEEP |
+		     HOST_CTRL0_FORCESUSPEND);
+	setbits_le32(&usb->hsicphyctrl1, HOST_CTRL0_PHYSWRST);
+	udelay(10);
+	clrbits_le32(&usb->hsicphyctrl1, HOST_CTRL0_PHYSWRST);
+
+	/* PHY clock and power setup time */
+	// FIXME If this happens more than 50ms before executing the payload,
+	// we might not need this delay.
+	mdelay(50);
+}
+
+void usb_init(device_t dev)
+{
+	struct usb_phy *usb;
+	struct cpu_samsung_exynos5250_config *conf = dev->chip_info;
+
+	usb_vbus_init(conf->usb_vbus_gpio);
+	usb = (struct usb_phy *) samsung_get_base_usb_phy();
+	setup_usb_phy(usb, conf->usb_hsic_gpio);
+}