ARMv7: De-uboot-ify Exynos5250 code

When starting the Exynos5250 port, a lot of unneeded u-boot code
was imported. This is an attempt to get rid of a lot of unneeded
code before the port is used as a basis for further ARM ports.

There is a lot more that can be done, including cleaning up the
5250's Kconfig file.

Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3642
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 215 insertions, 0 deletions

diff --git a/src/cpu/samsung/exynos5250/tmu.c b/src/cpu/samsung/exynos5250/tmu.c
new file mode 100644
index 0000000000..5a871fd2ba
--- /dev/null
+++ b/src/cpu/samsung/exynos5250/tmu.c
@@ -0,0 +1,215 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* EXYNOS - Thermal Management Unit */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include "power.h"
+#include "tmu.h"
+
+#define TRIMINFO_RELOAD		1
+#define CORE_EN			1
+#define THERM_TRIP_EN		(1 << 12)
+
+#define INTEN_RISE0		1
+#define INTEN_RISE1		(1 << 4)
+#define INTEN_RISE2		(1 << 8)
+#define INTEN_FALL0		(1 << 16)
+#define INTEN_FALL1		(1 << 20)
+#define INTEN_FALL2		(1 << 24)
+
+#define TRIM_INFO_MASK		0xff
+
+#define INTCLEAR_RISE0		1
+#define INTCLEAR_RISE1		(1 << 4)
+#define INTCLEAR_RISE2		(1 << 8)
+#define INTCLEAR_FALL0		(1 << 16)
+#define INTCLEAR_FALL1		(1 << 20)
+#define INTCLEAR_FALL2		(1 << 24)
+#define INTCLEARALL		(INTCLEAR_RISE0 | INTCLEAR_RISE1 | \
+				 INTCLEAR_RISE2 | INTCLEAR_FALL0 | \
+				 INTCLEAR_FALL1 | INTCLEAR_FALL2)
+
+struct tmu_info exynos5250_tmu_info = {
+	.tmu_base = 0x10060000,
+	.tmu_mux = 6,
+	.data = {
+		.ts = {
+			.min_val = 25,
+			.max_val = 125,
+			.start_warning = 95,
+			.start_tripping = 105,
+			.hardware_tripping = 110,
+		},
+		.efuse_min_value = 40,
+		.efuse_value = 55,
+		.efuse_max_value = 100,
+		.slope = 0x10008802,
+	},
+	.dc_value = 25,
+};
+
+/*
+ * After reading temperature code from register, compensating
+ * its value and calculating celsius temperatue,
+ * get current temperatue.
+ *
+ * @return	current temperature of the chip as sensed by TMU
+ */
+static int get_cur_temp(struct tmu_info *info)
+{
+	int cur_temp;
+	struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
+
+	/* Temperature code range between min 25 and max 125 */
+	cur_temp = readl(&reg->current_temp) & 0xff;
+
+	/* Calibrate current temperature */
+	if (cur_temp)
+		cur_temp = cur_temp - info->te1 + info->dc_value;
+
+	return cur_temp;
+}
+
+/*
+ * Monitors status of the TMU device and exynos temperature
+ *
+ * @info	TMU info
+ * @temp	pointer to the current temperature value
+ * @return	enum tmu_status_t value, code indicating event to execute
+ */
+enum tmu_status_t tmu_monitor(struct tmu_info *info, int *temp)
+{
+	if (info->tmu_state == TMU_STATUS_INIT)
+		return -1;
+
+	int cur_temp;
+	struct tmu_data *data = &info->data;
+
+	/* Read current temperature of the SOC */
+	cur_temp = get_cur_temp(info);
+	*temp = cur_temp;
+
+	/* Temperature code lies between min 25 and max 125 */
+	if (cur_temp >= data->ts.start_tripping &&
+			cur_temp <= data->ts.max_val)
+		return TMU_STATUS_TRIPPED;
+	else if (cur_temp >= data->ts.start_warning)
+		return TMU_STATUS_WARNING;
+	else if (cur_temp < data->ts.start_warning &&
+			cur_temp >= data->ts.min_val)
+		return TMU_STATUS_NORMAL;
+	/* Temperature code does not lie between min 25 and max 125 */
+	else {
+		info->tmu_state = TMU_STATUS_INIT;
+		printk(BIOS_DEBUG, "EXYNOS_TMU: Thermal reading failed\n");
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Calibrate and calculate threshold values and
+ * enable interrupt levels
+ *
+ * @param	info pointer to the tmu_info struct
+ */
+static void tmu_setup_parameters(struct tmu_info *info)
+{
+	unsigned int te_temp, con;
+	unsigned int warning_code, trip_code, hwtrip_code;
+	unsigned int cooling_temp;
+	unsigned int rising_value;
+	struct tmu_data *data = &info->data;
+	struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
+
+	/* Must reload for using efuse value at EXYNOS */
+	writel(TRIMINFO_RELOAD, &reg->triminfo_control);
+
+	/* Get the compensation parameter */
+	te_temp = readl(&reg->triminfo);
+	info->te1 = te_temp & TRIM_INFO_MASK;
+	info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK);
+
+	if ((data->efuse_min_value > info->te1) ||
+			(info->te1 > data->efuse_max_value)
+			||  (info->te2 != 0))
+		info->te1 = data->efuse_value;
+
+	/* Get RISING & FALLING Threshold value */
+	warning_code = data->ts.start_warning
+			+ info->te1 - info->dc_value;
+	trip_code = data->ts.start_tripping
+			+ info->te1 - info->dc_value;
+	hwtrip_code = data->ts.hardware_tripping
+			+ info->te1 - info->dc_value;
+
+	cooling_temp = 0;
+
+	rising_value = ((warning_code << 8) |
+			(trip_code << 16) |
+			(hwtrip_code << 24));
+
+	/* Set interrupt level */
+	writel(rising_value, &reg->threshold_temp_rise);
+	writel(cooling_temp, &reg->threshold_temp_fall);
+
+	/*
+	 * Need to init all register settings after getting parameter info
+	 * [28:23] vref [11:8] slope - Tuning parameter
+	 *
+	 * WARNING: this slope value writes into many bits in the tmu_control
+	 * register, with the default FDT value of 268470274 (0x10008802)
+	 * we are using this essentially sets the default register setting
+	 * from the TRM for tmu_control.
+	 * TODO(bhthompson): rewrite this code such that we are not performing
+	 * a hard wipe of tmu_control and re verify functionality.
+	 */
+	writel(data->slope, &reg->tmu_control);
+
+	writel(INTCLEARALL, &reg->intclear);
+	/* TMU core enable */
+	con = readl(&reg->tmu_control);
+	con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN;
+
+	writel(con, &reg->tmu_control);
+
+	/* Enable HW thermal trip */
+	power_enable_hw_thermal_trip();
+
+	/* LEV1 LEV2 interrupt enable */
+	writel(INTEN_RISE1 | INTEN_RISE2, &reg->inten);
+}
+
+/*
+ * Initialize TMU device
+ *
+ * @return	int value, 0 for success
+ */
+int tmu_init(struct tmu_info *info)
+{
+	info->tmu_state = TMU_STATUS_INIT;
+
+	tmu_setup_parameters(info);
+	info->tmu_state = TMU_STATUS_NORMAL;
+
+	return 0;
+}