samsung/exynos5250: unify code

It turns out that the exynos5-common code previously imported from
u-boot is not common code at all but very specific to the 5250 and
not compatible with the 5450. Hence, unify the directories exynos5250
and exynos5-common. We will try to factor out common code while
progressing with the 5450 port.

Change-Id: Iab595e66fcd01eda8365c96fb8bef896f7602f03
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3641
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 99 insertions, 1 deletions

diff --git a/src/cpu/samsung/exynos5250/cpu.h b/src/cpu/samsung/exynos5250/cpu.h
index cff966ee98..1f94d8f986 100644
--- a/src/cpu/samsung/exynos5250/cpu.h
+++ b/src/cpu/samsung/exynos5250/cpu.h
@@ -22,7 +22,105 @@
 #ifndef _EXYNOS5250_CPU_H
 #define _EXYNOS5250_CPU_H
 
-#include <cpu/samsung/exynos5-common/cpu.h>
+#define S5PC1XX_ADDR_BASE	0xE0000000
+
+/* S5PC100 */
+#define S5PC100_PRO_ID		0xE0000000
+#define S5PC100_CLOCK_BASE	0xE0100000
+#define S5PC100_GPIO_BASE	0xE0300000
+#define S5PC100_VIC0_BASE	0xE4000000
+#define S5PC100_VIC1_BASE	0xE4100000
+#define S5PC100_VIC2_BASE	0xE4200000
+#define S5PC100_DMC_BASE	0xE6000000
+#define S5PC100_SROMC_BASE	0xE7000000
+#define S5PC100_ONENAND_BASE	0xE7100000
+#define S5PC100_PWMTIMER_BASE	0xEA000000
+#define S5PC100_WATCHDOG_BASE	0xEA200000
+#define S5PC100_UART_BASE	0xEC000000
+#define S5PC100_MMC_BASE	0xED800000
+
+/* S5PC110 */
+#define S5PC110_PRO_ID		0xE0000000
+#define S5PC110_CLOCK_BASE	0xE0100000
+#define S5PC110_GPIO_BASE	0xE0200000
+#define S5PC110_PWMTIMER_BASE	0xE2500000
+#define S5PC110_WATCHDOG_BASE	0xE2700000
+#define S5PC110_UART_BASE	0xE2900000
+#define S5PC110_SROMC_BASE	0xE8000000
+#define S5PC110_MMC_BASE	0xEB000000
+#define S5PC110_DMC0_BASE	0xF0000000
+#define S5PC110_DMC1_BASE	0xF1400000
+#define S5PC110_VIC0_BASE	0xF2000000
+#define S5PC110_VIC1_BASE	0xF2100000
+#define S5PC110_VIC2_BASE	0xF2200000
+#define S5PC110_VIC3_BASE	0xF2300000
+#define S5PC110_OTG_BASE	0xEC000000
+#define S5PC110_PHY_BASE	0xEC100000
+#define S5PC110_USB_PHY_CONTROL 0xE010E80C
+
+#include <arch/io.h>
+
+#define DEVICE_NOT_AVAILABLE		0
+
+#define EXYNOS_PRO_ID			0x10000000
+
+/* Address of address of function that copys data from SD or MMC */
+#define EXYNOS_COPY_MMC_FNPTR_ADDR	0x02020030
+
+/* Address of address of function that copys data from SPI */
+#define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
+
+/* Address of address of function that copys data through USB */
+#define EXYNOS_COPY_USB_FNPTR_ADDR	0x02020070
+
+/* Boot mode values */
+#define EXYNOS_USB_SECONDARY_BOOT	0xfeed0002
+
+#define EXYNOS_IRAM_SECONDARY_BASE	0x02020018
+
+#define EXYNOS_I2C_SPACING		0x10000
+
+enum boot_mode {
+	/*
+	 * Assign the OM pin values for respective boot modes.
+	 * Exynos4 does not support spi boot and the mmc boot OM
+	 * pin values are the same across Exynos4 and Exynos5.
+	 */
+	BOOT_MODE_MMC = 4,
+	BOOT_MODE_SERIAL = 20,
+	/* Boot based on Operating Mode pin settings */
+	BOOT_MODE_OM = 32,
+	BOOT_MODE_USB,		/* Boot using USB download */
+};
+
+/**
+ * Get the boot device containing BL1, BL2 (SPL) and U-boot
+ *
+ * @return boot device
+ */
+enum boot_mode exynos_get_boot_device(void);
+
+/**
+ * Check if a wakeup is permitted.
+ *
+ * On some boards we need to look at a special GPIO to ensure that the wakeup
+ * from sleep was valid.  If the wakeup is not valid we need to go through a
+ * full reset.
+ *
+ * The default implementation of this function allows all wakeups.
+ *
+ * @return 1 if wakeup is permitted; 0 otherwise
+ */
+int board_wakeup_permitted(void);
+
+/**
+ * Init subsystems according to the reset status
+ *
+ * @return 0 for a normal boot, non-zero for a resume
+ */
+int lowlevel_init_subsystems(void);
+
+int arch_cpu_init(void);
 
 /* EXYNOS5 */
 #define EXYNOS5_GPIO_PART6_BASE		0x03860000	/* Z<6:0> */