diff options
author | Stefan Reinauer <reinauer@chromium.org> | 2013-05-10 16:21:58 -0700 |
---|---|---|
committer | Stefan Reinauer <stefan.reinauer@coreboot.org> | 2013-07-10 02:41:09 +0200 |
commit | 043eb0e35f93b41348eb69061a6aa0355ef544bc (patch) | |
tree | 3f5875408faf7223a9edfa1c3629e44e411b81d9 /src/cpu/samsung/exynos5-common/exynos5-common.h | |
parent | 6adef0847e4a62abf00e489209d239c958447830 (diff) |
Wield battle axe at ARM port
This patch unfortunately incorporates a number of changes,
all of which are making future ARM ports easier.
- drop cruft that came in with u-boot
- move serial console from mainboard Kconfig to Exynos Kconfig
- factor out non-board specific wakeup code
- move generic bootblock code from mainboard to Exynos
- actually call arch_cpu_init()
- remove dead code
- fix up copyright messages
- remove snow_ prefix from a lot of code to reduce the noise
when creating a new mainboard based on that code.
Change-Id: Ic05326edf5a7e1a691c5ff841a604cb9e351b562
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3640
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/cpu/samsung/exynos5-common/exynos5-common.h')
-rw-r--r-- | src/cpu/samsung/exynos5-common/exynos5-common.h | 153 |
1 files changed, 1 insertions, 152 deletions
diff --git a/src/cpu/samsung/exynos5-common/exynos5-common.h b/src/cpu/samsung/exynos5-common/exynos5-common.h index b510d68ce0..b2957bfc62 100644 --- a/src/cpu/samsung/exynos5-common/exynos5-common.h +++ b/src/cpu/samsung/exynos5-common/exynos5-common.h @@ -22,175 +22,24 @@ * MA 02111-1307 USA */ -/* TODO(dhendrix): some #defines are commented out here and moved to Kconfig */ - #ifndef __EXYNOS5_CONFIG_H #define __EXYNOS5_CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* S5P Family */ -#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ -#define BUILD_PART_FS_STUFF 1 /* Disk Partition Support */ - -#define CONFIG_ARCH_CPU_INIT /* Used to check cpu type */ - #include <cpu/samsung/exynos5250/cpu.h> /* get chip and board defs */ -/* Align LCD to 1MB boundary */ -#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_CMD_SHA256 -//#define CONFIG_EXYNOS_ACE_SHA +/* TODO(dhendrix): some #defines are commented out here and moved to Kconfig */ //#define CONFIG_SYS_SDRAM_BASE 0x40000000 //#define CONFIG_SYS_TEXT_BASE 0x43e00000 -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING - /* Power Down Modes */ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 #define S5P_CHECK_LPA 0xABAD0000 -/* Offset for inform registers */ -#define INFORM0_OFFSET 0x800 -#define INFORM1_OFFSET 0x804 - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) - -/* select serial console configuration */ -#define CONFIG_SERIAL_MULTI -//#define CONFIG_BAUDRATE 115200 -#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 - -#define CONFIG_BOARD_EARLY_INIT_F - -/* PWM */ -#define CONFIG_PWM - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT - -/* Number of GPIOS to use for board revision detection */ -#define CONFIG_BOARD_REV_GPIO_COUNT 2 - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -#ifdef CONFIG_SPI_FLASH -/* Enable SPI H/W Controller Driver support */ -#define CONFIG_EXYNOS_SPI - -/* FIXME(dhendrix): We should be concerned with SPI flash parts here... */ -#if 0 -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_SPI_FLASH_WINBOND -/* Enable Gigadevice SPI flash support for Snow board */ -#define CONFIG_SPI_FLASH_GIGADEVICE -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -/* Set speed for SPI flash */ -#define CONFIG_SF_DEFAULT_SPEED 50000000 -#endif -#endif - -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS - -#define CONFIG_SECURE_BL1_ONLY - -/* Secure FW size configuration */ -#ifdef CONFIG_SECURE_BL1_ONLY -#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ -#else -#define CONFIG_SEC_FW_SIZE 0 -#endif - -/* Configuration of BL1, BL2, ENV Blocks on mmc */ -#define CONFIG_RES_BLOCK_SIZE (512) -#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ -#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ - -#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) -#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) - -#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) - -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 -#define CONFIG_ENV_OFFSET (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE + \ - CONFIG_BL2_SIZE) -#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -#define CONFIG_ENV_SPI_BUS 1 -#else /* CONFIG_ENV_IS_IN_MMC */ -#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) -#endif - -/* U-boot copy size from boot Media to DRAM.*/ -#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) - -/* Set the emmc bus width to 8 */ -#define CONFIG_MSHCI_BUS_WIDTH 8 -#define CONFIG_MSHCI_PERIPH_ID PERIPH_ID_SDMMC0 - -#if BUILD_PART_FS_STUFF -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#endif - -/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT - -#define CONFIG_SYS_THUMB_BUILD - /* We spend about 100us getting from reset to SPL */ #define CONFIG_SPL_TIME_US 100000 -/* Stringify a token */ -#ifndef STRINGIFY -#define _STRINGIFY(x) #x -#define STRINGIFY(x) _STRINGIFY(x) -#endif - #endif /* __EXYNOS5_CONFIG_H */ |