CPU: Add basic support for Nominal Configurable TDP

Ivybridge B0+ CPUs are capable of supporting multiple TDP levels.
This complicates the default case because now the registers that
were reporting max non-turbo ratio are reporting that value for
the highest possible TDP level.

For now this change just forces everything to use the Nominal TDP
values instead of the higher (or lower) levels.

- When building P-state tables, determine the P[1] (max non turbo)
ratio based on the Nominal ratio if available.
- Set the turbo activation ratio to the Nominal max ratio.
- Mirror the power level settings in new MCHBAR register after
they are written, which happens after BIOS_RESET_CPL is set.
- Set the current ratio to Nominal ratio at boot.

1) Verify that P-state table is generated properly with
P[0]=1801MHz (ratio 0x1C) and P[1]=1800MHz (ratio 0x12)

PSS: 1801MHz power 17000 control 0x1c00 status 0x1c00
PSS: 1800MHz power 17000 control 0x1200 status 0x1200

2) Verify power limits in MCHBAR match PKG_POWER_LIMIT:

> rdmsr 0 0x610
0x800080aa00dc8088
> mmio_read32 0xfed159a4
0x000080aa
> mmio_read32 0xfed159a0
0x00dc8088

3) Verify turbo activation ratio is set to nominal ratio:

> rdmsr 0 0x64c
0x0000000000000012

4) Check that proper ratio was set at boot on one core only:

> grep 'frequency set to' /sys/firmware/log
model_x06ax: frequency set to 1800
model_x06ax: frequency set to 1800
model_x06ax: frequency set to 1800
model_x06ax: frequency set to 1800

Change-Id: I592e60a7740f31b140986a8269dca91b4adbb270
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/1304
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 8 insertions, 0 deletions

diff --git a/src/cpu/intel/model_206ax/model_206ax.h b/src/cpu/intel/model_206ax/model_206ax.h
index 3343d1129b..d482ff0108 100644
--- a/src/cpu/intel/model_206ax/model_206ax.h
+++ b/src/cpu/intel/model_206ax/model_206ax.h
@@ -81,6 +81,13 @@
 #define MSR_PP0_POWER_LIMIT		0x638
 #define MSR_PP1_POWER_LIMIT		0x640
 
+#define IVB_CONFIG_TDP_MIN_CPUID	0x306a2
+#define MSR_CONFIG_TDP_NOMINAL		0x648
+#define MSR_CONFIG_TDP_LEVEL1		0x649
+#define MSR_CONFIG_TDP_LEVEL2		0x64a
+#define MSR_CONFIG_TDP_CONTROL		0x64b
+#define MSR_TURBO_ACTIVATION_RATIO	0x64c
+
 /* P-state configuration */
 #define PSS_MAX_ENTRIES			8
 #define PSS_RATIO_STEP			2
@@ -93,6 +100,7 @@ void intel_model_206ax_finalize_smm(void);
 #else
 /* Configure power limits for turbo mode */
 void set_power_limits(u8 power_limit_1_time);
+int cpu_config_tdp_levels(void);
 #endif
 
 #endif