summaryrefslogtreecommitdiff
path: root/src/cpu/amd
diff options
context:
space:
mode:
authorMyles Watson <mylesgw@gmail.com>2010-04-08 15:12:18 +0000
committerMyles Watson <mylesgw@gmail.com>2010-04-08 15:12:18 +0000
commit362db613a0556a102e2812c1c00e3491eafdb66f (patch)
tree67757c096c1d71f982b0475691eba185dc7a0457 /src/cpu/amd
parent9b43afde3922e7c4c58dbed85df2a9ea26e11bdf (diff)
Cosmetically make init_cpus more similar for fam10 and K8.
Remove some fam10 warnings. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5382 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/cpu/amd')
-rw-r--r--src/cpu/amd/model_10xxx/init_cpus.c351
-rw-r--r--src/cpu/amd/model_10xxx/model_10xxx_init.c6
-rw-r--r--src/cpu/amd/model_fxx/init_cpus.c517
3 files changed, 410 insertions, 464 deletions
diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c
index f81e8fe5b6..cce44d7869 100644
--- a/src/cpu/amd/model_10xxx/init_cpus.c
+++ b/src/cpu/amd/model_10xxx/init_cpus.c
@@ -26,33 +26,10 @@
#ifndef SET_FIDVID_CORE0_ONLY
/* MSR FIDVID_CTL and FIDVID_STATUS are shared by cores,
- Need to do every AP to set common FID/VID*/
+ Need to do every AP to set common FID/VID */
#define SET_FIDVID_CORE0_ONLY 0
#endif
-static void print_initcpu8 (const char *strval, u8 val)
-{
- printk(BIOS_DEBUG, "%s%02x\n", strval, val);
-}
-
-static void print_initcpu8_nocr (const char *strval, u8 val)
-{
- printk(BIOS_DEBUG, "%s%02x", strval, val);
-}
-
-
-static void print_initcpu16 (const char *strval, u16 val)
-{
- printk(BIOS_DEBUG, "%s%04x\n", strval, val);
-}
-
-
-static void print_initcpu(const char *strval, u32 val)
-{
- printk(BIOS_DEBUG, "%s%08x\n", strval, val);
-}
-
-
void update_microcode(u32 cpu_deviceid);
static void prep_fid_change(void);
static void init_fidvid_stage2(u32 apicid, u32 nodeid);
@@ -65,14 +42,13 @@ static void set_EnableCf8ExtCfg(void)
msr_t msr;
msr = rdmsr(NB_CFG_MSR);
// EnableCf8ExtCfg: We need that to access CONFIG_PCI_IO_CFG_EXT 4K range
- msr.hi |= (1<<(46-32));
+ msr.hi |= (1 << (46 - 32));
wrmsr(NB_CFG_MSR, msr);
}
#else
static void set_EnableCf8ExtCfg(void) { }
#endif
-
/*[39:8] */
#define PCI_MMIO_BASE 0xfe000000
/* because we will use gs to store hi, so need to make sure lo can start
@@ -85,34 +61,31 @@ static void set_pci_mmio_conf_reg(void)
msr = rdmsr(0xc0010058);
msr.lo &= ~(0xfff00000 | (0xf << 2));
// 256 bus per segment, MMIO reg will be 4G , enable MMIO Config space
- msr.lo |= ((8+CONFIG_PCI_BUS_SEGN_BITS) << 2) | (1 << 0);
+ msr.lo |= ((8 + CONFIG_PCI_BUS_SEGN_BITS) << 2) | (1 << 0);
msr.hi &= ~(0x0000ffff);
- msr.hi |= (PCI_MMIO_BASE >> (32-8));
- wrmsr(0xc0010058, msr); // MMIO Config Base Address Reg
+ msr.hi |= (PCI_MMIO_BASE >> (32 - 8));
+ wrmsr(0xc0010058, msr); // MMIO Config Base Address Reg
//mtrr for that range?
// set_var_mtrr_x(7, PCI_MMIO_BASE<<8, PCI_MMIO_BASE>>(32-8), 0x00000000, 0x01, MTRR_TYPE_UNCACHEABLE);
set_wrap32dis();
- msr.hi = (PCI_MMIO_BASE >> (32-8));
+ msr.hi = (PCI_MMIO_BASE >> (32 - 8));
msr.lo = 0;
- wrmsr(0xc0000101, msr); //GS_Base Reg
-
-
+ wrmsr(0xc0000101, msr); //GS_Base Reg
#endif
}
-
-typedef void (*process_ap_t)(u32 apicid, void *gp);
+typedef void (*process_ap_t) (u32 apicid, void *gp);
//core_range = 0 : all cores
//core range = 1 : core 0 only
//core range = 2 : cores other than core0
-static void for_each_ap(u32 bsp_apicid, u32 core_range,
- process_ap_t process_ap, void *gp)
+static void for_each_ap(u32 bsp_apicid, u32 core_range, process_ap_t process_ap,
+ void *gp)
{
// here assume the OS don't change our apicid
u32 ap_apicid;
@@ -122,7 +95,7 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range,
u32 disable_siblings;
u32 cores_found;
u32 nb_cfg_54;
- int i,j;
+ int i, j;
u32 ApicIdCoreIdSize;
/* get_nodes define in ht_wrapper.c */
@@ -130,8 +103,8 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range,
disable_siblings = !CONFIG_LOGICAL_CPUS;
-#if CONFIG_LOGICAL_CPUS == 1
- if(read_option(CMOS_VSTART_multi_core, CMOS_VLEN_multi_core, 0) != 0) { // 0 mean multi core
+#if CONFIG_LOGICAL_CPUS == 1 && CONFIG_HAVE_OPTION_TABLE == 1
+ if (read_option(CMOS_VSTART_multi_core, CMOS_VLEN_multi_core, 0) != 0) { // 0 mean multi core
disable_siblings = 1;
}
#endif
@@ -141,10 +114,10 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range,
nb_cfg_54 = read_nb_cfg_54();
ApicIdCoreIdSize = (cpuid_ecx(0x80000008) >> 12 & 0xf);
- if(ApicIdCoreIdSize) {
+ if (ApicIdCoreIdSize) {
siblings = ((1 << ApicIdCoreIdSize) - 1);
} else {
- siblings = 3; //quad core
+ siblings = 3; //quad core
}
for (i = 0; i < nodes; i++) {
@@ -158,24 +131,26 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range,
jstart = 0;
}
- if (disable_siblings || (core_range==1)) {
+ if (disable_siblings || (core_range == 1)) {
jend = 0;
} else {
jend = cores_found;
}
-
for (j = jstart; j <= jend; j++) {
- ap_apicid = i * (nb_cfg_54 ? (siblings + 1):1) + j * (nb_cfg_54 ? 1:64);
+ ap_apicid =
+ i * (nb_cfg_54 ? (siblings + 1) : 1) +
+ j * (nb_cfg_54 ? 1 : 64);
- #if (CONFIG_ENABLE_APIC_EXT_ID == 1) && (CONFIG_APIC_ID_OFFSET > 0)
- #if CONFIG_LIFT_BSP_APIC_ID == 0
- if( (i != 0) || (j != 0)) /* except bsp */
- #endif
+#if (CONFIG_ENABLE_APIC_EXT_ID == 1) && (CONFIG_APIC_ID_OFFSET > 0)
+#if CONFIG_LIFT_BSP_APIC_ID == 0
+ if ((i != 0) || (j != 0)) /* except bsp */
+#endif
ap_apicid += CONFIG_APIC_ID_OFFSET;
- #endif
+#endif
- if(ap_apicid == bsp_apicid) continue;
+ if (ap_apicid == bsp_apicid)
+ continue;
process_ap(ap_apicid, gp);
@@ -183,8 +158,7 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range,
}
}
-/* FIXME: Duplicate of what is in lapic.h? */
-static int lapic_remote_read(int apicid, int reg, u32 *pvalue)
+static inline int lapic_remote_read(int apicid, int reg, u32 *pvalue)
{
int timeout;
u32 status;
@@ -192,8 +166,9 @@ static int lapic_remote_read(int apicid, int reg, u32 *pvalue)
lapic_wait_icr_idle();
lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
lapic_write(LAPIC_ICR, LAPIC_DM_REMRD | (reg >> 4));
- timeout = 0;
+/* Extra busy check compared to lapic.h */
+ timeout = 0;
do {
status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
} while (status == LAPIC_ICR_BUSY && timeout++ < 1000);
@@ -212,31 +187,33 @@ static int lapic_remote_read(int apicid, int reg, u32 *pvalue)
return result;
}
-
/* Use the LAPIC timer count register to hold each cores init status */
#define LAPIC_MSG_REG 0x380
-
#if SET_FIDVID == 1
static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid);
#endif
-static inline __attribute__((always_inline)) void print_apicid_nodeid_coreid(u32 apicid, struct node_core_id id, const char *str)
+static inline __attribute__ ((always_inline))
+void print_apicid_nodeid_coreid(u32 apicid, struct node_core_id id,
+ const char *str)
{
- printk(BIOS_DEBUG, "%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\n", str, apicid, id.nodeid, id.coreid);
+ printk(BIOS_DEBUG,
+ "%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\n", str,
+ apicid, id.nodeid, id.coreid);
}
-
-static unsigned wait_cpu_state(u32 apicid, u32 state)
+static u32 wait_cpu_state(u32 apicid, u32 state)
{
u32 readback = 0;
u32 timeout = 1;
int loop = 4000000;
while (--loop > 0) {
- if (lapic_remote_read(apicid, LAPIC_MSG_REG, &readback) != 0) continue;
+ if (lapic_remote_read(apicid, LAPIC_MSG_REG, &readback) != 0)
+ continue;
if ((readback & 0x3f) == state) {
timeout = 0;
- break; //target cpu is in stage started
+ break; //target cpu is in stage started
}
}
if (timeout) {
@@ -248,30 +225,26 @@ static unsigned wait_cpu_state(u32 apicid, u32 state)
return timeout;
}
-
-static void wait_ap_started(u32 ap_apicid, void *gp )
+static void wait_ap_started(u32 ap_apicid, void *gp)
{
u32 timeout;
- timeout = wait_cpu_state(ap_apicid, 0x13); // started
- if(timeout) {
- print_initcpu8_nocr("* AP ", ap_apicid);
- print_initcpu(" didn't start timeout:", timeout);
- }
- else {
- print_initcpu8_nocr("AP started: ", ap_apicid);
+ timeout = wait_cpu_state(ap_apicid, 0x13); // started
+ printk(BIOS_DEBUG, "* AP %02x", ap_apicid);
+ if (timeout) {
+ printk(BIOS_DEBUG, " timed out:%08x\n", timeout);
+ } else {
+ printk(BIOS_DEBUG, "started\n");
}
}
-
static void wait_all_other_cores_started(u32 bsp_apicid)
{
// all aps other than core0
- print_debug("started ap apicid: ");
- for_each_ap(bsp_apicid, 2 , wait_ap_started, (void *)0);
- print_debug("\n");
+ printk(BIOS_DEBUG, "started ap apicid: ");
+ for_each_ap(bsp_apicid, 2, wait_ap_started, (void *)0);
+ printk(BIOS_DEBUG, "\n");
}
-
static void allow_all_aps_stop(u32 bsp_apicid)
{
/* Called by the BSP to indicate AP can stop */
@@ -292,7 +265,6 @@ static void enable_apic_ext_id(u32 node)
pci_write_config32(NODE_HT(node), 0x68, val);
}
-
static void STOP_CAR_AND_CPU(void)
{
msr_t msr;
@@ -302,12 +274,13 @@ static void STOP_CAR_AND_CPU(void)
msr.lo &= ~(1 << ClLinesToNbDis);
wrmsr(BU_CFG2, msr);
- disable_cache_as_ram(); // inline
+ disable_cache_as_ram(); // inline
+ /* stop all cores except node0/core0 the bsp .... */
stop_this_cpu();
}
#if RAMINIT_SYSINFO == 1
-static u32 init_cpus(u32 cpu_init_detectedx ,struct sys_info *sysinfo)
+static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo)
#else
static u32 init_cpus(u32 cpu_init_detectedx)
#endif
@@ -320,7 +293,7 @@ static u32 init_cpus(u32 cpu_init_detectedx)
* already set early mtrr in cache_as_ram.inc
*/
- /* enable access pci conf via mmio*/
+ /* enable access pci conf via mmio */
set_pci_mmio_conf_reg();
/* that is from initial apicid, we need nodeid and coreid
@@ -328,36 +301,35 @@ static u32 init_cpus(u32 cpu_init_detectedx)
id = get_node_core_id_x();
/* NB_CFG MSR is shared between cores, so we need make sure
- core0 is done at first --- use wait_all_core0_started */
- if(id.coreid == 0) {
- set_apicid_cpuid_lo(); /* only set it on core0 */
- set_EnableCf8ExtCfg(); /* only set it on core0 */
- #if (CONFIG_ENABLE_APIC_EXT_ID == 1)
+ core0 is done at first --- use wait_all_core0_started */
+ if (id.coreid == 0) {
+ set_apicid_cpuid_lo(); /* only set it on core0 */
+ set_EnableCf8ExtCfg(); /* only set it on core0 */
+#if (CONFIG_ENABLE_APIC_EXT_ID == 1)
enable_apic_ext_id(id.nodeid);
- #endif
+#endif
}
enable_lapic();
-
#if (CONFIG_ENABLE_APIC_EXT_ID == 1) && (CONFIG_APIC_ID_OFFSET > 0)
u32 initial_apicid = get_initial_apicid();
- #if CONFIG_LIFT_BSP_APIC_ID == 0
- if( initial_apicid != 0 ) // other than bsp
- #endif
+#if CONFIG_LIFT_BSP_APIC_ID == 0
+ if (initial_apicid != 0) // other than bsp
+#endif
{
/* use initial apic id to lift it */
u32 dword = lapic_read(LAPIC_ID);
dword &= ~(0xff << 24);
- dword |= (((initial_apicid + CONFIG_APIC_ID_OFFSET) & 0xff) << 24);
+ dword |=
+ (((initial_apicid + CONFIG_APIC_ID_OFFSET) & 0xff) << 24);
lapic_write(LAPIC_ID, dword);
}
-
- #if CONFIG_LIFT_BSP_APIC_ID == 1
+#if CONFIG_LIFT_BSP_APIC_ID == 1
bsp_apicid += CONFIG_APIC_ID_OFFSET;
- #endif
+#endif
#endif
@@ -365,31 +337,28 @@ static u32 init_cpus(u32 cpu_init_detectedx)
apicid = lapicid();
// show our apicid, nodeid, and coreid
- if( id.coreid==0 ) {
- if (id.nodeid!=0) //all core0 except bsp
+ if (id.coreid == 0) {
+ if (id.nodeid != 0) //all core0 except bsp
print_apicid_nodeid_coreid(apicid, id, " core0: ");
- }
- else { //all other cores
+ } else { //all other cores
print_apicid_nodeid_coreid(apicid, id, " corex: ");
}
-
if (cpu_init_detectedx) {
- print_apicid_nodeid_coreid(apicid, id, "\n\n\nINIT detected from ");
- print_debug("\nIssuing SOFT_RESET...\n");
+ print_apicid_nodeid_coreid(apicid, id,
+ "\n\n\nINIT detected from ");
+ printk(BIOS_DEBUG, "\nIssuing SOFT_RESET...\n");
soft_reset();
}
- if(id.coreid == 0) {
- if(!(warm_reset_detect(id.nodeid))) //FIXME: INIT is checked above but check for more resets?
- distinguish_cpu_resets(id.nodeid); // Also indicates we are started
+ if (id.coreid == 0) {
+ if (!(warm_reset_detect(id.nodeid))) //FIXME: INIT is checked above but check for more resets?
+ distinguish_cpu_resets(id.nodeid); // Also indicates we are started
}
-
// Mark the core as started.
lapic_write(LAPIC_MSG_REG, (apicid << 24) | 0x13);
-
- if(apicid != bsp_apicid) {
+ if (apicid != bsp_apicid) {
/* Setup each AP's cores MSRs.
* This happens after HTinit.
* The BSP runs this code in it's own path.
@@ -397,20 +366,24 @@ static u32 init_cpus(u32 cpu_init_detectedx)
update_microcode(cpuid_eax(1));
cpuSetAMDMSR();
-
#if SET_FIDVID == 1
- #if (CONFIG_LOGICAL_CPUS == 1) && (SET_FIDVID_CORE0_ONLY == 1)
+#if (CONFIG_LOGICAL_CPUS == 1) && (SET_FIDVID_CORE0_ONLY == 1)
// Run on all AP for proper FID/VID setup.
- if(id.coreid == 0 ) // only need set fid for core0
- #endif
+ if (id.coreid == 0) // only need set fid for core0
+#endif
{
- // check warm(bios) reset to call stage2 otherwise do stage1
+ // check warm(bios) reset to call stage2 otherwise do stage1
if (warm_reset_detect(id.nodeid)) {
- printk(BIOS_DEBUG, "init_fidvid_stage2 apicid: %02x\n", apicid);
+ printk(BIOS_DEBUG,
+ "init_fidvid_stage2 apicid: %02x\n",
+ apicid);
init_fidvid_stage2(apicid, id.nodeid);
} else {
- printk(BIOS_DEBUG, "init_fidvid_ap(stage1) apicid: %02x\n", apicid);
- init_fidvid_ap(bsp_apicid, apicid, id.nodeid, id.coreid);
+ printk(BIOS_DEBUG,
+ "init_fidvid_ap(stage1) apicid: %02x\n",
+ apicid);
+ init_fidvid_ap(bsp_apicid, apicid, id.nodeid,
+ id.coreid);
}
}
#endif
@@ -424,13 +397,14 @@ static u32 init_cpus(u32 cpu_init_detectedx)
set_var_mtrr(0, 0x00000000, CONFIG_RAMTOP, MTRR_TYPE_WRBACK);
STOP_CAR_AND_CPU();
- printk(BIOS_DEBUG, "\nAP %02x should be halted but you are reading this....\n", apicid);
+ printk(BIOS_DEBUG,
+ "\nAP %02x should be halted but you are reading this....\n",
+ apicid);
}
return bsp_apicid;
}
-
static u32 is_core0_started(u32 nodeid)
{
u32 htic;
@@ -441,21 +415,22 @@ static u32 is_core0_started(u32 nodeid)
return htic;
}
-
static void wait_all_core0_started(void)
{
/* When core0 is started, it will distingush_cpu_resets
- . So wait for that to finish */
+ * So wait for that to finish */
u32 i;
u32 nodes = get_nodes();
- printk(BIOS_DEBUG, "Wait all core0s started \n");
- for(i=1;i<nodes;i++) { // skip bsp, because it is running on bsp
- while(!is_core0_started(i)) {}
- print_initcpu8(" Core0 started on node: ", i);
+ printk(BIOS_DEBUG, "core0 started: ");
+ for (i = 1; i < nodes; i++) { // skip bsp, because it is running on bsp
+ while (!is_core0_started(i)) {
+ }
+ printk(BIOS_DEBUG, " %02x", i);
}
- printk(BIOS_DEBUG, "Wait all core0s started done\n");
+ printk(BIOS_DEBUG, "\n");
}
+
#if CONFIG_MAX_PHYSICAL_CPUS > 1
/**
* void start_node(u32 node)
@@ -480,14 +455,13 @@ static void start_node(u8 node)
#endif
/* Allow APs to make requests (ROM fetch) */
- val=pci_read_config32(NODE_HT(node), 0x6c);
+ val = pci_read_config32(NODE_HT(node), 0x6c);
val &= ~(1 << 1);
pci_write_config32(NODE_HT(node), 0x6c, val);
printk(BIOS_DEBUG, " done.\n");
}
-
/**
* static void setup_remote_node(u32 node)
*
@@ -517,7 +491,7 @@ static void setup_remote_node(u8 node)
printk(BIOS_DEBUG, "setup_remote_node: %02x", node);
/* copy the default resource map from node 0 */
- for(i = 0; i < ARRAY_SIZE(pci_reg); i++) {
+ for (i = 0; i < ARRAY_SIZE(pci_reg); i++) {
u32 value;
u16 reg;
reg = pci_reg[i];
@@ -527,7 +501,7 @@ static void setup_remote_node(u8 node)
}
printk(BIOS_DEBUG, " done\n");
}
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */
+#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */
static void AMD_Errata281(u8 node, u32 revision, u32 platform)
{
@@ -546,7 +520,8 @@ static void AMD_Errata281(u8 node, u32 revision, u32 platform)
/* For each node we need to check for a "broken" node */
if (!(revision & (AMD_DR_B0 | AMD_DR_B1))) {
for (i = 0; i < nodes; i++) {
- if (mctGetLogicalCPUID(i) & (AMD_DR_B0 | AMD_DR_B1)) {
+ if (mctGetLogicalCPUID(i) &
+ (AMD_DR_B0 | AMD_DR_B1)) {
mixed = 1;
break;
}
@@ -590,7 +565,6 @@ static void AMD_Errata281(u8 node, u32 revision, u32 platform)
}
}
-
static void AMD_Errata298(void)
{
/* Workaround for L2 Eviction May Occur during operation to
@@ -612,36 +586,35 @@ static void AMD_Errata298(void)
if (affectedRev) {
msr = rdmsr(HWCR);
- msr.lo |= 0x08; /* Set TlbCacheDis bit[3] */
+ msr.lo |= 0x08; /* Set TlbCacheDis bit[3] */
wrmsr(HWCR, msr);
msr = rdmsr(BU_CFG);
- msr.lo |= 0x02; /* Set TlbForceMemTypeUc bit[1] */
+ msr.lo |= 0x02; /* Set TlbForceMemTypeUc bit[1] */
wrmsr(BU_CFG, msr);
msr = rdmsr(OSVW_ID_Length);
- msr.lo |= 0x01; /* OS Visible Workaround - MSR */
+ msr.lo |= 0x01; /* OS Visible Workaround - MSR */
wrmsr(OSVW_ID_Length, msr);
msr = rdmsr(OSVW_Status);
- msr.lo |= 0x01; /* OS Visible Workaround - MSR */
+ msr.lo |= 0x01; /* OS Visible Workaround - MSR */
wrmsr(OSVW_Status, msr);
}
if (!affectedRev && (mctGetLogicalCPUID(0xFF) & AMD_DR_B3)) {
msr = rdmsr(OSVW_ID_Length);
- msr.lo |= 0x01; /* OS Visible Workaround - MSR */
+ msr.lo |= 0x01; /* OS Visible Workaround - MSR */
wrmsr(OSVW_ID_Length, msr);
}
}
-
-u32 get_platform_type(void)
+static u32 get_platform_type(void)
{
u32 ret = 0;
- switch(SYSTEM_TYPE) {
+ switch (SYSTEM_TYPE) {
case 1:
ret |= AMD_PTYPE_DSK;
break;
@@ -663,8 +636,7 @@ u32 get_platform_type(void)
return ret;
}
-
-void AMD_SetupPSIVID_d (u32 platform_type, u8 node)
+static void AMD_SetupPSIVID_d(u32 platform_type, u8 node)
{
u32 dword;
int i;
@@ -672,27 +644,26 @@ void AMD_SetupPSIVID_d (u32 platform_type, u8 node)
if (platform_type & (AMD_PTYPE_MOB | AMD_PTYPE_DSK)) {
- /* The following code sets the PSIVID to the lowest support P state
- * assuming that the VID for the lowest power state is below
- * the VDD voltage regulator threshold. (This also assumes that there
- * is a Pstate lower than P0)
- */
+ /* The following code sets the PSIVID to the lowest support P state
+ * assuming that the VID for the lowest power state is below
+ * the VDD voltage regulator threshold. (This also assumes that there
+ * is a Pstate lower than P0)
+ */
- for( i = 4; i >= 0; i--) {
+ for (i = 4; i >= 0; i--) {
msr = rdmsr(PS_REG_BASE + i);
/* Pstate valid? */
if (msr.hi & PS_EN_MASK) {
- dword = pci_read_config32(NODE_PCI(i,3), 0xA0);
+ dword = pci_read_config32(NODE_PCI(i, 3), 0xA0);
dword &= ~0x7F;
dword |= (msr.lo >> 9) & 0x7F;
- pci_write_config32(NODE_PCI(i,3), 0xA0, dword);
+ pci_write_config32(NODE_PCI(i, 3), 0xA0, dword);
break;
}
}
}
}
-
/**
* AMD_CpuFindCapability - Traverse PCI capability list to find host HT links.
* HT Phy operations are not valid on links that aren't present, so this
@@ -700,29 +671,29 @@ void AMD_SetupPSIVID_d (u32 platform_type, u8 node)
*
* Returns the offset of the link register.
*/
-BOOL AMD_CpuFindCapability (u8 node, u8 cap_count, u8 *offset)
+static BOOL AMD_CpuFindCapability(u8 node, u8 cap_count, u8 * offset)
{
- u32 reg;
+ u32 reg;
u32 val;
/* get start of CPU HT Host Capabilities */
val = pci_read_config32(NODE_PCI(node, 0), 0x34);
- val &= 0xFF; //reg offset of first link
+ val &= 0xFF; //reg offset of first link
cap_count++;
/* Traverse through the capabilities. */
do {
- reg = pci_read_config32(NODE_PCI(node, 0), val);
+ reg = pci_read_config32(NODE_PCI(node, 0), val);
/* Is the capability block a HyperTransport capability block? */
- if ((reg & 0xFF) == 0x08) {
+ if ((reg & 0xFF) == 0x08) {
/* Is the HT capability block an HT Host Capability? */
- if ((reg & 0xE0000000) == (1 << 29))
+ if ((reg & 0xE0000000) == (1 << 29))
cap_count--;
}
- if(cap_count)
- val = (reg >> 8) & 0xFF; //update reg offset
+ if (cap_count)
+ val = (reg >> 8) & 0xFF; //update reg offset
} while (cap_count && val);
*offset = (u8) val;
@@ -734,14 +705,13 @@ BOOL AMD_CpuFindCapability (u8 node, u8 cap_count, u8 *offset)
return FALSE;
}
-
/**
* AMD_checkLinkType - Compare desired link characteristics using a logical
* link type mask.
*
* Returns the link characteristic mask.
*/
-u32 AMD_checkLinkType (u8 node, u8 link, u8 regoff)
+static u32 AMD_checkLinkType(u8 node, u8 link, u8 regoff)
{
u32 val;
u32 linktype = 0;
@@ -765,11 +735,10 @@ u32 AMD_checkLinkType (u8 node, u8 link, u8 regoff)
else
linktype |= HTPHY_LINKTYPE_HT1;
-
/* Check ganged */
val = pci_read_config32(NODE_PCI(node, 0), (link << 2) + 0x170);
- if ( val & 1)
+ if (val & 1)
linktype |= HTPHY_LINKTYPE_GANGED;
else
linktype |= HTPHY_LINKTYPE_UNGANGED;
@@ -777,12 +746,11 @@ u32 AMD_checkLinkType (u8 node, u8 link, u8 regoff)
return linktype;
}
-
/**
* AMD_SetHtPhyRegister - Use the HT link's HT Phy portal registers to update
* a phy setting for that link.
*/
-void AMD_SetHtPhyRegister (u8 node, u8 link, u8 entry)
+static void AMD_SetHtPhyRegister(u8 node, u8 link, u8 entry)
{
u32 phyReg;
u32 phyBase;
@@ -792,8 +760,7 @@ void AMD_SetHtPhyRegister (u8 node, u8 link, u8 entry)
if (link > 3)
link -= 4;
- phyBase = ((u32)link << 3) | 0x180;
-
+ phyBase = ((u32) link << 3) | 0x180;
/* Get the portal control register's initial value
* and update it to access the desired phy register
@@ -834,7 +801,6 @@ void AMD_SetHtPhyRegister (u8 node, u8 link, u8 entry)
} while (!(val & HTPHY_IS_COMPLETE_MASK));
}
-
void cpuSetAMDMSR(void)
{
/* This routine loads the CPU with default settings in fam10_msr_default
@@ -852,7 +818,7 @@ void cpuSetAMDMSR(void)
revision = mctGetLogicalCPUID(0xFF);
platform = get_platform_type();
- for(i = 0; i < ARRAY_SIZE(fam10_msr_default); i++) {
+ for (i = 0; i < ARRAY_SIZE(fam10_msr_default); i++) {
if ((fam10_msr_default[i].revision & revision) &&
(fam10_msr_default[i].platform & platform)) {
msr = rdmsr(fam10_msr_default[i].msr);
@@ -868,8 +834,7 @@ void cpuSetAMDMSR(void)
printk(BIOS_DEBUG, " done\n");
}
-
-void cpuSetAMDPCI(u8 node)
+static void cpuSetAMDPCI(u8 node)
{
/* This routine loads the CPU with default settings in fam10_pci_default
* table . It must be run after Cache-As-RAM has been enabled, and
@@ -883,39 +848,41 @@ void cpuSetAMDPCI(u8 node)
printk(BIOS_DEBUG, "cpuSetAMDPCI %02d", node);
-
revision = mctGetLogicalCPUID(node);
platform = get_platform_type();
AMD_SetupPSIVID_d(platform, node); /* Set PSIVID offset which is not table driven */
- for(i = 0; i < ARRAY_SIZE(fam10_pci_default); i++) {
+ for (i = 0; i < ARRAY_SIZE(fam10_pci_default); i++) {
if ((fam10_pci_default[i].revision & revision) &&
(fam10_pci_default[i].platform & platform)) {
val = pci_read_config32(NODE_PCI(node,
- fam10_pci_default[i].function),
- fam10_pci_default[i].offset);
+ fam10_pci_default[i].
+ function),
+ fam10_pci_default[i].offset);
val &= ~fam10_pci_default[i].mask;
val |= fam10_pci_default[i].data;
pci_write_config32(NODE_PCI(node,
- fam10_pci_default[i].function),
- fam10_pci_default[i].offset, val);
+ fam10_pci_default[i].
+ function),
+ fam10_pci_default[i].offset, val);
}
}
- for(i = 0; i < ARRAY_SIZE(fam10_htphy_default); i++) {
+ for (i = 0; i < ARRAY_SIZE(fam10_htphy_default); i++) {
if ((fam10_htphy_default[i].revision & revision) &&
(fam10_htphy_default[i].platform & platform)) {
/* HT Phy settings either apply to both sublinks or have
* separate registers for sublink zero and one, so there
* will be two table entries. So, here we only loop
- cd t * through the sublink zeros in function zero.
+ cd t * through the sublink zeros in function zero.
*/
for (j = 0; j < 4; j++) {
if (AMD_CpuFindCapability(node, j, &offset)) {
if (AMD_checkLinkType(node, j, offset)
& fam10_htphy_default[i].linktype) {
- AMD_SetHtPhyRegister(node, j, i);
+ AMD_SetHtPhyRegister(node, j,
+ i);
}
} else {
/* No more capabilities,
@@ -932,14 +899,13 @@ void cpuSetAMDPCI(u8 node)
AMD_Errata281(node, revision, platform);
/* FIXME: if the dct phy doesn't init correct it needs to reset.
- if (revision & (AMD_DR_B2 | AMD_DR_B3))
- dctPhyDiag(); */
+ if (revision & (AMD_DR_B2 | AMD_DR_B3))
+ dctPhyDiag(); */
printk(BIOS_DEBUG, " done\n");
}
-
-void cpuInitializeMCA(void)
+static void cpuInitializeMCA(void)
{
/* Clears Machine Check Architecture (MCA) registers, which power on
* containing unknown data, on currently running processor.
@@ -951,30 +917,29 @@ void cpuInitializeMCA(void)
u32 reg;
u8 i;
- if (cpuid_edx(1) & 0x4080) { /* MCE and MCA (edx[7] and edx[14]) */
+ if (cpuid_edx(1) & 0x4080) { /* MCE and MCA (edx[7] and edx[14]) */
msr = rdmsr(MCG_CAP);
- if (msr.lo & MCG_CTL_P){ /* MCG_CTL_P bit is set? */
+ if (msr.lo & MCG_CTL_P) { /* MCG_CTL_P bit is set? */
msr.lo &= 0xFF;
msr.lo--;
- msr.lo <<= 2; /* multiply the count by 4 */
+ msr.lo <<= 2; /* multiply the count by 4 */
reg = MC0_STA + msr.lo;
msr.lo = msr.hi = 0;
- for (i=0; i < 4; i++) {
- wrmsr (reg, msr);
- reg -=4; /* Touch status regs for each bank */
+ for (i = 0; i < 4; i++) {
+ wrmsr(reg, msr);
+ reg -= 4; /* Touch status regs for each bank */
}
}
}
}
-
/**
* finalize_node_setup()
*
* Do any additional post HT init
*
*/
-void finalize_node_setup(struct sys_info *sysinfo)
+static void finalize_node_setup(struct sys_info *sysinfo)
{
u8 i;
u8 nodes = get_nodes();
@@ -983,13 +948,12 @@ void finalize_node_setup(struct sys_info *sysinfo)
#if RAMINIT_SYSINFO == 1
/* read Node0 F0_0x64 bit [8:10] to find out SbLink # */
reg = pci_read_config32(NODE_HT(0), 0x64);
- sysinfo->sblk = (reg>>8) & 7;
+ sysinfo->sblk = (reg >> 8) & 7;
sysinfo->sbbusn = 0;
sysinfo->nodes = nodes;
sysinfo->sbdn = get_sbdn(sysinfo->sbbusn);
#endif
-
for (i = 0; i < nodes; i++) {
cpuSetAMDPCI(i);
}
@@ -1001,10 +965,9 @@ void finalize_node_setup(struct sys_info *sysinfo)
#if CONFIG_MAX_PHYSICAL_CPUS > 1
/* Skip the BSP, start at node 1 */
- for(i=1; i<nodes; i++) {
+ for (i = 1; i < nodes; i++) {
setup_remote_node(i);
start_node(i);
}
#endif
}
-
diff --git a/src/cpu/amd/model_10xxx/model_10xxx_init.c b/src/cpu/amd/model_10xxx/model_10xxx_init.c
index b692144e20..4850ea0203 100644
--- a/src/cpu/amd/model_10xxx/model_10xxx_init.c
+++ b/src/cpu/amd/model_10xxx/model_10xxx_init.c
@@ -38,13 +38,9 @@
#include <cpu/amd/model_10xxx_msr.h>
extern device_t get_node_pci(u32 nodeid, u32 fn);
-extern int init_processor_name(void);
-
-
#define MCI_STATUS 0x401
-
msr_t rdmsr_amd(u32 index)
{
msr_t result;
@@ -67,7 +63,7 @@ void wrmsr_amd(u32 index, msr_t msr)
}
-void model_10xxx_init(device_t dev)
+static void model_10xxx_init(device_t dev)
{
u8 i;
msr_t msr;
diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c
index 1b6064fa46..fb8fbaa9d2 100644
--- a/src/cpu/amd/model_fxx/init_cpus.c
+++ b/src/cpu/amd/model_fxx/init_cpus.c
@@ -1,357 +1,344 @@
//it takes the CONFIG_ENABLE_APIC_EXT_ID and CONFIG_APIC_ID_OFFSET and CONFIG_LIFT_BSP_APIC_ID
#ifndef SET_FIDVID
- #if CONFIG_K8_REV_F_SUPPORT == 0
- #define SET_FIDVID 0
- #else
+#if CONFIG_K8_REV_F_SUPPORT == 0
+ #define SET_FIDVID 0
+#else
// for rev F, need to set FID to max
- #define SET_FIDVID 1
- #endif
-
+ #define SET_FIDVID 1
#endif
-#ifndef SET_FIDVID_CORE0_ONLY
- /* MSR FIDVID_CTL and FIDVID_STATUS are shared by cores, so may don't need to do twice*/
- #define SET_FIDVID_CORE0_ONLY 1
#endif
-static inline void print_initcpu8 (const char *strval, unsigned val)
-{
- printk(BIOS_DEBUG, "%s%02x\n", strval, val);
-}
-
-static inline void print_initcpu8_nocr (const char *strval, unsigned val)
-{
- printk(BIOS_DEBUG, "%s%02x", strval, val);
-}
-
-
-static inline void print_initcpu16 (const char *strval, unsigned val)
-{
- printk(BIOS_DEBUG, "%s%04x\n", strval, val);
-}
-
-static inline void print_initcpu(const char *strval, unsigned val)
-{
- printk(BIOS_DEBUG, "%s%08x\n", strval, val);
-}
+#ifndef SET_FIDVID_CORE0_ONLY
+ /* MSR FIDVID_CTL and FIDVID_STATUS are shared by cores, so may don't need to do twice */
+ #define SET_FIDVID_CORE0_ONLY 1
+#endif
-typedef void (*process_ap_t)(unsigned apicid, void *gp);
+typedef void (*process_ap_t) (u32 apicid, void *gp);
//core_range = 0 : all cores
//core range = 1 : core 0 only
//core range = 2 : cores other than core0
-static void for_each_ap(unsigned bsp_apicid, unsigned core_range, process_ap_t process_ap, void *gp)
+
+static void for_each_ap(u32 bsp_apicid, u32 core_range, process_ap_t process_ap,
+ void *gp)
{
// here assume the OS don't change our apicid
- unsigned ap_apicid;
+ u32 ap_apicid;
- unsigned nodes;
- unsigned siblings = 0;
- unsigned disable_siblings;
- unsigned e0_later_single_core;
- unsigned nb_cfg_54;
- int i,j;
+ u32 nodes;
+ u32 siblings = 0;
+ u32 disable_siblings;
+ u32 e0_later_single_core;
+ u32 nb_cfg_54;
+ int i, j;
/* get_nodes define in in_coherent_ht.c */
nodes = get_nodes();
- disable_siblings = !CONFIG_LOGICAL_CPUS;
+ disable_siblings = !CONFIG_LOGICAL_CPUS;
+
#if CONFIG_LOGICAL_CPUS == 1 && CONFIG_HAVE_OPTION_TABLE == 1
- if(read_option(CMOS_VSTART_multi_core, CMOS_VLEN_multi_core, 0) != 0) { // 0 mean multi core
- disable_siblings = 1;
- }
+ if (read_option(CMOS_VSTART_multi_core, CMOS_VLEN_multi_core, 0) != 0) { // 0 mean multi core
+ disable_siblings = 1;
+ }
#endif
/* here I assume that all node are same stepping, otherwise we can use use nb_cfg_54 from bsp for all nodes */
- nb_cfg_54 = read_nb_cfg_54();
-
+ nb_cfg_54 = read_nb_cfg_54();
- for(i=0; i<nodes;i++) {
+ for (i = 0; i < nodes; i++) {
e0_later_single_core = 0;
- j = ((pci_read_config32(PCI_DEV(0, 0x18+i, 3), 0xe8) >> 12) & 3);
- if(nb_cfg_54) {
- if(j == 0 ){ // if it is single core, we need to increase siblings for apic calculation
- #if CONFIG_K8_REV_F_SUPPORT == 0
- e0_later_single_core = is_e0_later_in_bsp(i); // single core
- #else
- e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3
- #endif
- }
- if(e0_later_single_core) {
- j=1;
- }
- }
- siblings = j;
-
- unsigned jstart, jend;
-
- if(core_range == 2) {
- jstart = 1;
- }
- else {
+ j = ((pci_read_config32(PCI_DEV(0, 0x18 + i, 3), 0xe8) >> 12) &
+ 3);
+ if (nb_cfg_54) {
+ if (j == 0) { // if it is single core, we need to increase siblings for apic calculation
+#if CONFIG_K8_REV_F_SUPPORT == 0
+ e0_later_single_core = is_e0_later_in_bsp(i); // single core
+#else
+ e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3
+#endif
+ }
+ if (e0_later_single_core) {
+ j = 1;
+ }
+ }
+ siblings = j;
+
+ u32 jstart, jend;
+
+ if (core_range == 2) {
+ jstart = 1;
+ } else {
jstart = 0;
}
- if(e0_later_single_core || disable_siblings || (core_range==1)) {
- jend = 0;
- } else {
- jend = siblings;
- }
-
-
- for(j=jstart; j<=jend; j++) {
+ if (e0_later_single_core || disable_siblings
+ || (core_range == 1)) {
+ jend = 0;
+ } else {
+ jend = siblings;
+ }
- ap_apicid = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8);
+ for (j = jstart; j <= jend; j++) {
+ ap_apicid =
+ i * (nb_cfg_54 ? (siblings + 1) : 1) +
+ j * (nb_cfg_54 ? 1 : 8);
- #if (CONFIG_ENABLE_APIC_EXT_ID == 1)
- #if CONFIG_LIFT_BSP_APIC_ID == 0
- if( (i!=0) || (j!=0)) /* except bsp */
- #endif
- ap_apicid += CONFIG_APIC_ID_OFFSET;
- #endif
+#if (CONFIG_ENABLE_APIC_EXT_ID == 1)
+#if CONFIG_LIFT_BSP_APIC_ID == 0
+ if ((i != 0) || (j != 0)) /* except bsp */
+#endif
+ ap_apicid += CONFIG_APIC_ID_OFFSET;
+#endif
- if(ap_apicid == bsp_apicid) continue;
+ if (ap_apicid == bsp_apicid)
+ continue;
- process_ap(ap_apicid, gp);
+ process_ap(ap_apicid, gp);
- }
- }
+ }
+ }
}
-
-static inline int lapic_remote_read(int apicid, int reg, unsigned *pvalue)
+static inline int lapic_remote_read(int apicid, int reg, u32 *pvalue)
{
- int timeout;
- unsigned status;
- int result;
- lapic_wait_icr_idle();
- lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
- lapic_write(LAPIC_ICR, LAPIC_DM_REMRD | (reg >> 4));
- timeout = 0;
-
- do {
- status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
- } while (status == LAPIC_ICR_BUSY && timeout++ < 1000);
-
- timeout = 0;
- do {
- status = lapic_read(LAPIC_ICR) & LAPIC_ICR_RR_MASK;
- } while (status == LAPIC_ICR_RR_INPROG && timeout++ < 1000);
-
- result = -1;
- if (status == LAPIC_ICR_RR_VALID) {
- *pvalue = lapic_read(LAPIC_RRR);
- result = 0;
- }
- return result;
+ int timeout;
+ u32 status;
+ int result;
+ lapic_wait_icr_idle();
+ lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
+ lapic_write(LAPIC_ICR, LAPIC_DM_REMRD | (reg >> 4));
+
+/* Extra busy check compared to lapic.h */
+ timeout = 0;
+ do {
+ status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
+ } while (status == LAPIC_ICR_BUSY && timeout++ < 1000);
+
+ timeout = 0;
+ do {
+ status = lapic_read(LAPIC_ICR) & LAPIC_ICR_RR_MASK;
+ } while (status == LAPIC_ICR_RR_INPROG && timeout++ < 1000);
+
+ result = -1;
+
+ if (status == LAPIC_ICR_RR_VALID) {
+ *pvalue = lapic_read(LAPIC_RRR);
+ result = 0;
+ }
+ return result;
}
#define LAPIC_MSG_REG 0x380
-
#if SET_FIDVID == 1
-static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid);
+static void init_fidvid_ap(u32 bsp_apicid, u32 apicid);
#endif
-static inline __attribute__((always_inline)) void print_apicid_nodeid_coreid(unsigned apicid, struct node_core_id id, const char *str)
+static inline __attribute__ ((always_inline))
+void print_apicid_nodeid_coreid(u32 apicid, struct node_core_id id,
+ const char *str)
{
- printk(BIOS_DEBUG, "%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\n", str, apicid, id.nodeid, id.coreid);
+ printk(BIOS_DEBUG,
+ "%s --- { APICID = %02x NODEID = %02x COREID = %02x} ---\n", str,
+ apicid, id.nodeid, id.coreid);
}
-
-static unsigned wait_cpu_state(unsigned apicid, unsigned state)
+static u32 wait_cpu_state(u32 apicid, u32 state)
{
- unsigned readback = 0;
- unsigned timeout = 1;
+ u32 readback = 0;
+ u32 timeout = 1;
int loop = 2000000;
- while(--loop>0) {
- if(lapic_remote_read(apicid, LAPIC_MSG_REG, &readback)!=0) continue;
- if((readback & 0xff) == state) {
+ while (--loop > 0) {
+ if (lapic_remote_read(apicid, LAPIC_MSG_REG, &readback) != 0)
+ continue;
+ if ((readback & 0xff) == state) {
timeout = 0;
- break; //target cpu is in stage started
+ break; //target cpu is in stage started
}
- }
- if(timeout) {
- if(readback) {
+ }
+ if (timeout) {
+ if (readback) {
timeout = readback;
}
}
return timeout;
}
-static void wait_ap_started(unsigned ap_apicid, void *gp )
+
+static void wait_ap_started(u32 ap_apicid, void *gp)
{
- unsigned timeout;
- timeout = wait_cpu_state(ap_apicid, 0x33); // started
- if(timeout) {
- print_initcpu8_nocr("*", ap_apicid);
- print_initcpu("*", timeout);
- }
- else {
- print_initcpu8_nocr(" ", ap_apicid);
+ u32 timeout;
+ timeout = wait_cpu_state(ap_apicid, 0x33); // started
+ printk(BIOS_DEBUG, "* AP %02x", ap_apicid);
+ if (timeout) {
+ printk(BIOS_DEBUG, " timed out:%08x\n", timeout);
+ } else {
+ printk(BIOS_DEBUG, "started\n");
}
}
-static void wait_all_aps_started(unsigned bsp_apicid)
+static void wait_all_aps_started(u32 bsp_apicid)
{
- for_each_ap(bsp_apicid, 0 , wait_ap_started, (void *)0);
+ for_each_ap(bsp_apicid, 0, wait_ap_started, (void *)0);
}
-static void wait_all_other_cores_started(unsigned bsp_apicid) // all aps other than core0
+static void wait_all_other_cores_started(u32 bsp_apicid)
{
- print_debug("started ap apicid: ");
- for_each_ap(bsp_apicid, 2 , wait_ap_started, (void *)0);
- print_debug("\n");
+ // all aps other than core0
+ printk(BIOS_DEBUG, "started ap apicid: ");
+ for_each_ap(bsp_apicid, 2, wait_ap_started, (void *)0);
+ printk(BIOS_DEBUG, "\n");
}
-static void allow_all_aps_stop(unsigned bsp_apicid)
+static void allow_all_aps_stop(u32 bsp_apicid)
{
- lapic_write(LAPIC_MSG_REG, (bsp_apicid<<24) | 0x44); // allow aps to stop
+ // allow aps to stop
+
+ lapic_write(LAPIC_MSG_REG, (bsp_apicid << 24) | 0x44);
}
static void STOP_CAR_AND_CPU(void)
{
- disable_cache_as_ram(); // inline
- stop_this_cpu(); // inline, it will stop all cores except node0/core0 the bsp ....
+ disable_cache_as_ram(); // inline
+ /* stop all cores except node0/core0 the bsp .... */
+ stop_this_cpu();
}
-#if CONFIG_MEM_TRAIN_SEQ == 1
-static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sys_info *sysinfo, unsigned retcall);
-#endif
-
#if RAMINIT_SYSINFO == 1
-static unsigned init_cpus(unsigned cpu_init_detectedx ,struct sys_info *sysinfo)
+static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo)
#else
-static unsigned init_cpus(unsigned cpu_init_detectedx)
+static u32 init_cpus(u32 cpu_init_detectedx)
#endif
{
- unsigned bsp_apicid = 0;
- unsigned apicid;
- struct node_core_id id;
-
- /*
- * already set early mtrr in cache_as_ram.inc
- */
-
- /* that is from initial apicid, we need nodeid and coreid later */
- id = get_node_core_id_x();
-
-
- /* NB_CFG MSR is shared between cores, so we need make sure core0 is done at first --- use wait_all_core0_started */
- if(id.coreid == 0) {
- set_apicid_cpuid_lo(); /* only set it on core0 */
- #if CONFIG_ENABLE_APIC_EXT_ID == 1
- enable_apic_ext_id(id.nodeid);
- #endif
- }
-
- enable_lapic();
-// init_timer(); // We need TMICT to pass msg for FID/VID change
-
- #if (CONFIG_ENABLE_APIC_EXT_ID == 1)
- unsigned initial_apicid = get_initial_apicid();
- #if CONFIG_LIFT_BSP_APIC_ID == 0
- if( initial_apicid != 0 ) // other than bsp
- #endif
- {
- /* use initial apic id to lift it */
- uint32_t dword = lapic_read(LAPIC_ID);
- dword &= ~(0xff<<24);
- dword |= (((initial_apicid + CONFIG_APIC_ID_OFFSET) & 0xff)<<24);
-
- lapic_write(LAPIC_ID, dword);
- }
-
- #if CONFIG_LIFT_BSP_APIC_ID == 1
- bsp_apicid += CONFIG_APIC_ID_OFFSET;
- #endif
-
- #endif
-
- /* get the apicid, it may be lifted already */
- apicid = lapicid();
-
-#if 0
- // show our apicid, nodeid, and coreid
- if( id.coreid==0 ) {
- if (id.nodeid!=0) //all core0 except bsp
- print_apicid_nodeid_coreid(apicid, id, " core0: ");
- }
- #if 0
- else { //all core1
- print_apicid_nodeid_coreid(apicid, id, " core1: ");
- }
- #endif
+ u32 bsp_apicid = 0;
+ u32 apicid;
+ struct node_core_id id;
+
+ /*
+ * already set early mtrr in cache_as_ram.inc
+ */
+
+ /* that is from initial apicid, we need nodeid and coreid
+ later */
+ id = get_node_core_id_x();
+
+ /* NB_CFG MSR is shared between cores, so we need make sure
+ core0 is done at first --- use wait_all_core0_started */
+ if (id.coreid == 0) {
+ set_apicid_cpuid_lo(); /* only set it on core0 */
+#if (CONFIG_ENABLE_APIC_EXT_ID == 1)
+ enable_apic_ext_id(id.nodeid);
+#endif
+ }
+
+ enable_lapic();
+ // init_timer(); // We need TMICT to pass msg for FID/VID change
+#if (CONFIG_ENABLE_APIC_EXT_ID == 1)
+ u32 initial_apicid = get_initial_apicid();
+
+#if CONFIG_LIFT_BSP_APIC_ID == 0
+ if (initial_apicid != 0) // other than bsp
+#endif
+ {
+ /* use initial apic id to lift it */
+ u32 dword = lapic_read(LAPIC_ID);
+ dword &= ~(0xff << 24);
+ dword |=
+ (((initial_apicid + CONFIG_APIC_ID_OFFSET) & 0xff) << 24);
+
+ lapic_write(LAPIC_ID, dword);
+ }
+#if CONFIG_LIFT_BSP_APIC_ID == 1
+ bsp_apicid += CONFIG_APIC_ID_OFFSET;
#endif
- if (cpu_init_detectedx) {
- print_apicid_nodeid_coreid(apicid, id, "\n\n\nINIT detected from ");
- print_debug("\nIssuing SOFT_RESET...\n");
- soft_reset();
- }
+#endif
- if(id.coreid==0) {
- distinguish_cpu_resets(id.nodeid);
- // start_other_core(id.nodeid); // start second core in first cpu, only allowed for nb_cfg_54 is not set
- }
+ /* get the apicid, it may be lifted already */
+ apicid = lapicid();
- //here don't need to wait
- lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x33); // mark the cpu is started
-
- if(apicid != bsp_apicid) {
- unsigned timeout=1;
- unsigned loop = 100;
- #if SET_FIDVID == 1
- #if (CONFIG_LOGICAL_CPUS == 1) && (SET_FIDVID_CORE0_ONLY == 1)
- if(id.coreid == 0 ) // only need set fid for core0
- #endif
- init_fidvid_ap(bsp_apicid, apicid);
- #endif
-
- // We need to stop the CACHE as RAM for this CPU, really?
- while(timeout && (loop-->0)) {
- timeout = wait_cpu_state(bsp_apicid, 0x44);
- }
- if(timeout) {
- print_initcpu8("while waiting for BSP signal to STOP, timeout in ap ", apicid);
- }
- lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x44); // bsp can not check it before stop_this_cpu
- set_var_mtrr(0, 0x00000000, CONFIG_RAMTOP, MTRR_TYPE_WRBACK);
- #if CONFIG_MEM_TRAIN_SEQ == 1
- train_ram_on_node(id.nodeid, id.coreid, sysinfo,
- (unsigned) STOP_CAR_AND_CPU);
- #endif
+#if 0
+ // show our apicid, nodeid, and coreid
+ if (id.coreid == 0) {
+ if (id.nodeid != 0) //all core0 except bsp
+ print_apicid_nodeid_coreid(apicid, id, " core0: ");
+ } else { //all other cores
+ print_apicid_nodeid_coreid(apicid, id, " corex: ");
+ }
+#endif
- STOP_CAR_AND_CPU();
- }
+ if (cpu_init_detectedx) {
+ print_apicid_nodeid_coreid(apicid, id,
+ "\n\n\nINIT detected from ");
+ printk(BIOS_DEBUG, "\nIssuing SOFT_RESET...\n");
+ soft_reset();
+ }
- return bsp_apicid;
-}
+ if (id.coreid == 0) {
+ distinguish_cpu_resets(id.nodeid);
+// start_other_core(id.nodeid); // start second core in first cpu, only allowed for nb_cfg_54 is not set
+ }
+ //here don't need to wait
+ lapic_write(LAPIC_MSG_REG, (apicid << 24) | 0x33); // mark the cpu is started
+
+ if (apicid != bsp_apicid) {
+ u32 timeout = 1;
+ u32 loop = 100;
+
+#if SET_FIDVID == 1
+#if (CONFIG_LOGICAL_CPUS == 1) && (SET_FIDVID_CORE0_ONLY == 1)
+ if (id.coreid == 0) // only need set fid for core0
+#endif
+ init_fidvid_ap(bsp_apicid, apicid);
+#endif
+ // We need to stop the CACHE as RAM for this CPU, really?
+ while (timeout && (loop-- > 0)) {
+ timeout = wait_cpu_state(bsp_apicid, 0x44);
+ }
+ if (timeout) {
+ printk(BIOS_DEBUG,
+ "while waiting for BSP signal to STOP, timeout in ap %02x\n",
+ apicid);
+ }
+ lapic_write(LAPIC_MSG_REG, (apicid << 24) | 0x44); // bsp can not check it before stop_this_cpu
+ set_var_mtrr(0, 0x00000000, CONFIG_RAMTOP, MTRR_TYPE_WRBACK);
+#if CONFIG_MEM_TRAIN_SEQ == 1
+ train_ram_on_node(id.nodeid, id.coreid, sysinfo,
+ (unsigned)STOP_CAR_AND_CPU);
+#endif
-static unsigned is_core0_started(unsigned nodeid)
+ STOP_CAR_AND_CPU();
+ }
+
+ return bsp_apicid;
+}
+
+static u32 is_core0_started(u32 nodeid)
{
- uint32_t htic;
- device_t device;
- device = PCI_DEV(0, 0x18 + nodeid, 0);
- htic = pci_read_config32(device, HT_INIT_CONTROL);
- htic &= HTIC_INIT_Detect;
- return htic;
+ u32 htic;
+ device_t device;
+ device = PCI_DEV(0, 0x18 + nodeid, 0);
+ htic = pci_read_config32(device, HT_INIT_CONTROL);
+ htic &= HTIC_INIT_Detect;
+ return htic;
}
static void wait_all_core0_started(void)
{
- //When core0 is started, it will distingush_cpu_resets. So wait for that
- unsigned i;
- unsigned nodes = get_nodes();
-
- print_debug("core0 started: ");
- for(i=1;i<nodes;i++) { // skip bsp, because it is running on bsp
- while(!is_core0_started(i)) {}
- print_initcpu8_nocr(" ", i);
- }
- print_debug("\n");
-
+ /* When core0 is started, it will distingush_cpu_resets
+ * So wait for that to finish */
+ u32 i;
+ u32 nodes = get_nodes();
+
+ printk(BIOS_DEBUG, "core0 started: ");
+ for (i = 1; i < nodes; i++) { // skip bsp, because it is running on bsp
+ while (!is_core0_started(i)) {
+ }
+ printk(BIOS_DEBUG, " %02x", i);
+ }
+ printk(BIOS_DEBUG, "\n");
}
-