diff options
| author | Nils Jacobs <njacobs8@hetnet.nl> | 2010-12-26 05:16:47 +0000 |
|---|---|---|
| committer | Peter Stuge <peter@stuge.se> | 2010-12-26 05:16:47 +0000 |
| commit | 3344743215acab0b7805592a7c52a9c93636b347 (patch) | |
| tree | e1d6732a24920b319f7ca6c94fff1d0f9ede1b54 /src/cpu/amd | |
| parent | 1c6d4e605588c03edf4e7ab70056d7c075fc5bb1 (diff) | |
Replace Geode GX2 MSR addresses for GLCP on GLIU1 with names
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6209 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/cpu/amd')
| -rw-r--r-- | src/cpu/amd/model_gx2/cpureginit.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/src/cpu/amd/model_gx2/cpureginit.c b/src/cpu/amd/model_gx2/cpureginit.c index 88e5b97553..f8efd9a2a5 100644 --- a/src/cpu/amd/model_gx2/cpureginit.c +++ b/src/cpu/amd/model_gx2/cpureginit.c @@ -15,25 +15,25 @@ void cpuRegInit (void) wrmsr(msrnum, msr); /* Set up GLCP to grab BTM data. */ - msrnum = 0x04C00000C; /* GLCP_DBGOUT MSR */ + msrnum = GLCP_DBGOUT; /* GLCP_DBGOUT MSR */ msr.hi = 0x0; msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out, */ wrmsr(msrnum, msr); /* exchange it to anything else to prevent this */ /* Turn off debug clock */ - msrnum = 0x04C000016; /* DBG_CLK_CTL */ + msrnum = GLCP_DBGCLKCTL; /* DBG_CLK_CTL */ msr.lo = 0x00; /* No clock */ msr.hi = 0x00; wrmsr(msrnum, msr); /* Set debug clock to CPU */ - msrnum = 0x04C000016; /* DBG_CLK_CTL */ + msrnum = GLCP_DBGCLKCTL; /* DBG_CLK_CTL */ msr.lo = 0x01; /* CPU CLOCK */ msr.hi = 0x00; wrmsr(msrnum, msr); /* Set fifo ctl to BTM bits wide */ - msrnum = 0x04C00005E; /* FIFO_CTL */ + msrnum = GLCP_FIFOCTL; /* FIFO_CTL */ msr.lo = 0x003880000; /* Bit [25:24] are size (11=BTM, 10 = 64 bit, 01= 32 bit, 00 = 16bit) */ wrmsr(msrnum, msr); /* Bit [23:21] are position (100 = CPU downto0) */ /* Bit [19] sets it up in slow data mode. */ @@ -53,7 +53,7 @@ void cpuRegInit (void) /* Set up delay on data lines, so that the hold time */ /* is 1 ns. */ - msrnum = 0x04C00000D ; /* GLCP IO DELAY CONTROLS */ + msrnum = GLCP_PROCSTAT; /* GLCP IO DELAY CONTROLS */ msr.lo = 0x082b5ad68; msr.hi = 0x080ad6b57; /* RGB delay = 0x07 */ wrmsr(msrnum, msr); @@ -64,7 +64,7 @@ void cpuRegInit (void) msr.hi = 0; wrmsr(msrnum, msr); - msrnum = 0x04C00000C ; /* GLCP_DBGOUT MSR */ + msrnum = GLCP_DBGOUT; /* GLCP_DBGOUT MSR */ msr.hi = 0x0; msr.lo = 0x0; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out, */ wrmsr(msrnum, msr); @@ -85,7 +85,7 @@ void cpuRegInit (void) wrmsr(msrnum, msr); /* Setup throttling to proper mode if it is ever enabled. */ - msrnum = 0x04C00001E; + msrnum = GLCP_TH_OD; msr.hi = 0x000000000; msr.lo = 0x00000603C; wrmsr(msrnum, msr); @@ -108,14 +108,14 @@ void cpuRegInit (void) wrmsr(msrnum, msr); /* Enable RSDC */ - msrnum = 0x1301 ; + msrnum = CPU_AC_SMM_CTL; msr = rdmsr(msrnum); msr.lo |= 0x08; wrmsr(msrnum, msr); /* Enable BTB */ /* I hate to put this check here but it doesn't really work in cpubug.asm */ - msrnum = MSR_GLCP+0x17; + msrnum = GLCP_CHIP_REVID; msr = rdmsr(msrnum); if (msr.lo >= CPU_REV_2_1){ msrnum = CPU_PF_BTB_CONF; |