diff options
| author | Li-Ta Lo <ollie@lanl.gov> | 2006-02-28 16:30:41 +0000 |
|---|---|---|
| committer | Li-Ta Lo <ollie@lanl.gov> | 2006-02-28 16:30:41 +0000 |
| commit | b2528aa653224d903f3b64e3af9aef4cc46fb7b9 (patch) | |
| tree | a28a7c706b9425c45e3ebb9576c562969b60095f /src/cpu/amd | |
| parent | bab9446dfd715255d7c8dbefa11a214ffc354cab (diff) | |
remove unused GX1 asm code
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2187 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/cpu/amd')
| -rw-r--r-- | src/cpu/amd/model_gx2/cpu_setup.inc | 71 | ||||
| -rw-r--r-- | src/cpu/amd/model_gx2/gx_setup.inc | 49 |
2 files changed, 0 insertions, 120 deletions
diff --git a/src/cpu/amd/model_gx2/cpu_setup.inc b/src/cpu/amd/model_gx2/cpu_setup.inc deleted file mode 100644 index c99b5336c6..0000000000 --- a/src/cpu/amd/model_gx2/cpu_setup.inc +++ /dev/null @@ -1,71 +0,0 @@ -/* - freebios/src/northbridge/nsc/gx1/cpu_setup.inc - - Copyright (c) 2002 Christer Weinigel <wingel@hack.org> - - Initialize the GX1 CPU configuration registers -*/ - -/* copied for gx2 for ron minnich, as a placeholder */ - -/* USES: esi, ecx, eax */ -#if 0 -#include <cpu/amd/gx2def.h> - - movl %eax, %ebp /* preserve bist */ - -cpu_setup_start: - leal cpu_setup_table, %esi - movl $cpu_setup_len, %ecx - -cpu_setup_loop: - movw (%esi), %ax - addl $2, %esi - outb %al, $0x22 - movb %ah, %al - outb %al, $0x23 - loop cpu_setup_loop - - movb $0xff, %al /* DIR1 -- Identification Register 1 */ - outb %al, $0x22 - inb $0x23, %al - cmpb $0x63, %al /* Revision for GXLV rev 3 */ - jbe cpu_no_ccr4 - - movb $0xe8, %al /* CCR4 */ - outb %al, $0x22 - inb $0x23, %al - orb $0x20, %al /* Enable FPU Fast Mode */ - outb %al, $0x23 - - movb $0xf0, %al /* PCR1 --- Performace Control */ - outb %al, $0x22 - inb $0x23, %al - orb $0x02, %al /* Incrementor on, whatever that is */ - outb %al, $0x23 - - movb $0x20, %al /* PCR0 --- Performace Control */ - outb %al, $0x22 - inb $0x23, %al - orb $0x20, %al /* Must be 1 according to data book */ - orb $0x04, %al /* Incrementor Margin 10 */ - outb %al, $0x23 -cpu_no_ccr4: - - jmp cpu_setup_end - -cpu_setup_table: - .byte 0xc1, 0x00 /* NO SMIs */ - .byte 0xc3, 0x14 /* Enable CPU config register */ - .byte 0x20, 0x00 - .byte 0xb8, GX_BASE>>30 /* Enable GXBASE address */ - .byte 0xc2, 0x00 - .byte 0xe8, 0x98 - .byte 0xc3, 0xf8 /* Enable CPU config register */ -cpu_setup_len = (.-cpu_setup_table)/2 - -cpu_setup_end: - nop - - movl %ebp, %eax /* Restore bist */ -#endif
\ No newline at end of file diff --git a/src/cpu/amd/model_gx2/gx_setup.inc b/src/cpu/amd/model_gx2/gx_setup.inc deleted file mode 100644 index 8da7eee801..0000000000 --- a/src/cpu/amd/model_gx2/gx_setup.inc +++ /dev/null @@ -1,49 +0,0 @@ -/* - freebios/src/northbridge/nsc/gx2/gx_setup.inc - - Copyright (c) 2002 Christer Weinigel <wingel@hack.org> - - Setup the GX_BASE registers on a National Semiconductor Geode CPU -*/ - -#include <cpu/amd/gx2def.h> - -#if 0 - movl %eax, %ebp /* Preserve bist */ - -gx_setup_start: - leal gx_setup_table, %esi - movl $gx_setup_len, %ecx - movl $GX_BASE, %edi - -gx_setup_loop: - movw (%esi), %di /* Only read the low word of address */ - addl $4, %esi - movl (%esi), %eax /* Data */ - addl $4, %esi - movl %eax, (%edi) - loop gx_setup_loop - - jmp gx_setup_end - -gx_setup_table: - /* Allow writes to config registers */ - .long DC_UNLOCK, DC_UNLOCK_MAGIC - .long DC_GENERAL_CFG, 0 - .long DC_UNLOCK, 0 - - .long BC_DRAM_TOP, 0x3fffffff - .long BC_XMAP_1, 0x60 - .long BC_XMAP_2, 0 - .long BC_XMAP_3, 0 - - .long MC_BANK_CFG, 0x00700070 /* No DIMMS installed */ - .long MC_MEM_CNTRL1, XBUSARB - .long MC_GBASE_ADD, 0x7ff /* Almost 1GB */ -gx_setup_len = (.-gx_setup_table)/8 - -gx_setup_end: - nop - - movl %ebp, %eax /* Restore bist */ -#endif |