Improving BKDG implementation of P-states,

CPU and northbridge frequency and voltage
handling for Fam 10 in SVI mode.

In fact I changed coreDelay before deleting
the code in fidvid that called it. But there're
still a couple of calls from src/northbridge/amd/amdmct/wrappers/mcti_d.c
Since the comment encouraged fixing something, I
parametrized it with the delay time in microseconds
and paranoically tried to avoid an overflow at pathological
moments.

Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Acked-by: Marc Jones <marcj303@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6408 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 18 insertions, 18 deletions

diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c
index 962b8ca178..18e2a0762f 100644
--- a/src/cpu/amd/model_10xxx/fidvid.c
+++ b/src/cpu/amd/model_10xxx/fidvid.c
@@ -77,9 +77,9 @@ static void applyBoostFIDOffset(  device_t dev ) {
       u32 cpuFid = msr.lo & PS_CPU_FID_MASK;
       cpuFid = cpuFid + asymetricBoostThisCore;
       msr.lo &=   ~PS_CPU_FID_MASK;
-      msr.lo |= cpuFid ; 
+      msr.lo |= cpuFid ;
       wrmsr(PS_REG_BASE , msr);
-    
+
   }
 }
 
@@ -104,7 +104,7 @@ static void enableNbPState1( device_t dev ) {
 }
 
 static u8 setPStateMaxVal( device_t dev ) {
-      u8 i,maxpstate=0;  
+      u8 i,maxpstate=0;
       for (i = 0; i < NM_PS_REG; i++) {
          msr_t msr =  rdmsr(PS_REG_BASE + i);
          if (msr.hi & PS_IDD_VALUE_MASK) {
@@ -141,8 +141,8 @@ static void dualPlaneOnly(  device_t dev ) {
          msr.lo=0; msr.hi=0;
          wrmsr(0xC0010064, rdmsr(0xC0010068) );
          wrmsr(0xC0010068, msr );
-      }  
-      
+      }
+
       //FIXME: CPTC2 and HTC_REG should get max per node, not per core ?
       u8 maxpstate = setPStateMaxVal(dev);
 
@@ -155,15 +155,15 @@ static void dualPlaneOnly(  device_t dev ) {
   }
 }
 
-static int vidTo100uV(u8 vid) 
+static int vidTo100uV(u8 vid)
 {// returns voltage corresponding to vid in tenths of mV, i.e. hundreds of uV
  // BKDG #31116 rev 3.48 2.4.1.6
   int voltage;
   if (vid >= 0x7c) {
     voltage = 0;
   } else {
-    voltage = (15500 - (125*vid)); 
-  } 
+    voltage = (15500 - (125*vid));
+  }
   return voltage;
 }
 
@@ -193,12 +193,12 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
 
 	/* This function calculates the VsSlamTime using the range of possible
 	 * voltages instead of a hardcoded 200us.
-         * Note: his function is called only from prep_fid_change, 
-         * and that from init_cpus.c finalize_node_setup() 
+         * Note: his function is called only from prep_fid_change,
+         * and that from init_cpus.c finalize_node_setup()
          * (after set AMD MSRs and init ht )
 	 */
 
-        /* BKDG r31116 2010-04-22  2.4.1.7 step b F3xD8[VSSlamTime] */ 
+        /* BKDG r31116 2010-04-22  2.4.1.7 step b F3xD8[VSSlamTime] */
 	/* Calculate Slam Time
 	 * Vslam = (mobileCPU?0.2:0.4)us/mV * (Vp0 - (lowest out of Vpmin or Valt)) mV
 	 * In our case, we will scale the values by 100 to avoid
@@ -222,7 +222,7 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
 	highVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F);
         if (!(msr.hi & 0x80000000)) {
   	    printk(BIOS_ERR,"P-state info in MSRC001_0064 is invalid !!!\n");
-            highVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0) 
+            highVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0)
                                      >> PS_CPU_VID_SHFT) & 0x7F);
 	}
 
@@ -238,13 +238,13 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
 	/* Get PSmax's index */
 	msr = rdmsr(0xC0010061);
 	bValue = (u8) ((msr.lo >> PS_MAX_VAL_SHFT) & BIT_MASK_3);
- 
+
 	/* Get PSmax's VID */
 	msr = rdmsr(0xC0010064 + bValue);
 	lowVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F);
         if (!(msr.hi & 0x80000000)) {
 	    printk(BIOS_ERR,"P-state info in MSR%8x is invalid !!!\n",0xC0010064 + bValue);
-            lowVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0+(bValue*4)) 
+            lowVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0+(bValue*4))
                                      >> PS_CPU_VID_SHFT) & 0x7F);
 	}
 
@@ -266,7 +266,7 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
 	if (lowVoltageVid < bValue)
 		lowVoltageVid = bValue;
 
-        u8 mobileFlag = get_platform_type() & AMD_PTYPE_MOB; 
+        u8 mobileFlag = get_platform_type() & AMD_PTYPE_MOB;
 	minimumSlamTime =  (mobileFlag?2:4) * (vidTo100uV(highVoltageVid) - vidTo100uV(lowVoltageVid)); /* * 0.01 us */
 
 
@@ -819,7 +819,7 @@ static void init_fidvid_bsp_stage1(u32 ap_apicid, void *gp)
 
 }
 
-static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode) 
+static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
 {
 	msr_t msr;
 	u8 i;
@@ -837,7 +837,7 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
 	for (i = 0; i < 5; i++) {
 		msr = rdmsr(0xC0010064 + i);
 		/*  NbDid (bit 22 of P-state Reg) == 0  or NbVidUpdatedAll = 1 */
-		if (   (msr.hi & PS_IDD_VALUE_MASK) 
+		if (   (msr.hi & PS_IDD_VALUE_MASK)
                     && (msr.hi & PS_EN_MASK)
                     &&(((msr.lo & PS_NB_DID_MASK) == 0) || NbVidUpdatedAll)) {
 			msr.lo &= PS_NB_VID_M_OFF;
@@ -855,7 +855,7 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
 	/* For each core in the system, transition all cores to StartupPstate */
 	msr = rdmsr(0xC0010071);
 	StartupPstate = msr.hi & 0x07;
-       
+
 	/* Set and wait for StartupPstate to set. */
         set_pstate(StartupPstate);