diff options
| author | Arthur Heymans <arthur@aheymans.xyz> | 2017-05-12 21:16:41 +0200 |
|---|---|---|
| committer | Nico Huber <nico.h@gmx.de> | 2017-09-23 11:06:25 +0000 |
| commit | b29078e4015bbc3e8cf00ba64f0799c087546563 (patch) | |
| tree | 57c64e181ce902a4babcd7b031f699f6db5d93bd /src/cpu/allwinner | |
| parent | 1850aa6df6a324960bd0873277660d84562cdb61 (diff) | |
mb/*/*: Remove rtc nvram configurable baud rate
There have been discussions about removing this since it does not seem
to be used much and only creates troubles for boards without defaults,
not to mention that it was configurable on many boards that do not
even feature uart.
It is still possible to configure the baudrate through the Kconfig
option.
Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Diffstat (limited to 'src/cpu/allwinner')
| -rw-r--r-- | src/cpu/allwinner/a10/uart.c | 2 | ||||
| -rw-r--r-- | src/cpu/allwinner/a10/uart_console.c | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c index 45dcaed1b2..f7c2db99b3 100644 --- a/src/cpu/allwinner/a10/uart.c +++ b/src/cpu/allwinner/a10/uart.c @@ -105,7 +105,7 @@ void uart_init(int idx) struct a10_uart *uart_base = uart_platform_baseptr(idx); /* Use default 8N1 encoding */ - a10_uart_configure(uart_base, default_baudrate(), + a10_uart_configure(uart_base, CONFIG_TTYS0_BAUD, 8, UART_PARITY_NONE, 1); a10_uart_enable_fifos(uart_base); } diff --git a/src/cpu/allwinner/a10/uart_console.c b/src/cpu/allwinner/a10/uart_console.c index e7774c9183..03d41228bc 100644 --- a/src/cpu/allwinner/a10/uart_console.c +++ b/src/cpu/allwinner/a10/uart_console.c @@ -44,7 +44,7 @@ void uart_fill_lb(void *data) struct lb_serial serial; serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; serial.baseaddr = uart_platform_base(CONFIG_UART_FOR_CONSOLE); - serial.baud = default_baudrate(); + serial.baud = CONFIG_TTYS0_BAUD; serial.regwidth = 1; serial.input_hertz = uart_platform_refclk(); serial.uart_pci_addr = 0; |