arm(64): Replace write32() and friends with writel()

This patch is a raw application of the following spatch to the
directories src/arch/arm(64)?, src/mainboard/<arm(64)-board>,
src/soc/<arm(64)-soc> and src/drivers/gic:

@@
expression A, V;
@@
- write32(V, A)
+ writel(V, A)
@@
expression A, V;
@@
- write16(V, A)
+ writew(V, A)
@@
expression A, V;
@@
- write8(V, A)
+ writeb(V, A)

This replaces all uses of write{32,16,8}() with write{l,w,b}()
which is currently equivalent and much more common. This is a
preparatory step that will allow us to easier flip them all at once to
the new write32(a,v) model.

BRANCH=none
BUG=chromium:451388
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.

Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24
Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254862
Reviewed-on: http://review.coreboot.org/9834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

7 files changed, 39 insertions, 39 deletions

diff --git a/src/cpu/allwinner/a10/clock.c b/src/cpu/allwinner/a10/clock.c
index a8e21514d3..e7984dd328 100644
--- a/src/cpu/allwinner/a10/clock.c
+++ b/src/cpu/allwinner/a10/clock.c
@@ -28,7 +28,7 @@ void a1x_periph_clock_enable(enum a1x_clken periph)
 	addr = (void *)A1X_CCM_BASE + (periph >> 5);
 	reg32 = read32(addr);
 	reg32 |= 1 << (periph & 0x1f);
-	write32(reg32, addr);
+	writel(reg32, addr);
 }
 
 /**
@@ -44,7 +44,7 @@ void a1x_periph_clock_disable(enum a1x_clken periph)
 	addr = (void *)A1X_CCM_BASE + (periph >> 5);
 	reg32 = read32(addr);
 	reg32 &= ~(1 << (periph & 0x1f));
-	write32(reg32, addr);
+	writel(reg32, addr);
 }
 
 /**
@@ -88,7 +88,7 @@ void a1x_pll5_configure(u8 mul_n, u8 mul_k, u8 div_m, u8 exp_div_p)
 	reg32 |= (PLL5_FACTOR_M(div_m) | PLL5_FACTOR_N(mul_n) |
 		  PLL5_FACTOR_K(mul_k) | PLL5_DIV_EXP_P(exp_div_p));
 	reg32 |= PLL5_PLL_ENABLE;
-	write32(reg32, &ccm->pll5_cfg);
+	writel(reg32, &ccm->pll5_cfg);
 }
 
 /**
@@ -166,7 +166,7 @@ static void cpu_clk_src_switch(u32 clksel_bits)
 	reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
 	reg32 &= ~CPU_CLK_SRC_MASK;
 	reg32 |= clksel_bits & CPU_CLK_SRC_MASK;
-	write32(reg32, &ccm->cpu_ahb_apb0_cfg);
+	writel(reg32, &ccm->cpu_ahb_apb0_cfg);
 }
 
 static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
@@ -179,7 +179,7 @@ static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
 	reg32 |= ((axi - 1) << 0) & AXI_DIV_MASK;
 	reg32 |= (ahb_exp << 4) & AHB_DIV_MASK;
 	reg32 |= (apb0_exp << 8) & APB0_DIV_MASK;
-	write32(reg32, &ccm->cpu_ahb_apb0_cfg);
+	writel(reg32, &ccm->cpu_ahb_apb0_cfg);
 }
 
 static void spin_delay(u32 loops)
@@ -262,7 +262,7 @@ void a1x_set_cpu_clock(u16 cpu_clk_mhz)
 	change_sys_divisors(axi, ahb_exp, apb0_exp);
 
 	/* Configure PLL1 at the desired frequency */
-	write32(pll1_table[i].pll1_cfg, &ccm->pll1_cfg);
+	writel(pll1_table[i].pll1_cfg, &ccm->pll1_cfg);
 	spin_delay(8);
 
 	cpu_clk_src_switch(CPU_CLK_SRC_PLL1);
diff --git a/src/cpu/allwinner/a10/gpio.c b/src/cpu/allwinner/a10/gpio.c
index 5fca2d7c80..61f120d714 100644
--- a/src/cpu/allwinner/a10/gpio.c
+++ b/src/cpu/allwinner/a10/gpio.c
@@ -76,7 +76,7 @@ void gpio_write(u8 port, u32 val)
 	if ((port > GPS))
 		return;
 
-	write32(val, &gpio->port[port].dat);
+	writel(val, &gpio->port[port].dat);
 }
 
 /**
diff --git a/src/cpu/allwinner/a10/pinmux.c b/src/cpu/allwinner/a10/pinmux.c
index de87440d8f..d22647fc70 100644
--- a/src/cpu/allwinner/a10/pinmux.c
+++ b/src/cpu/allwinner/a10/pinmux.c
@@ -33,7 +33,7 @@ void gpio_set_pin_func(u8 port, u8 pin, u8 pad_func)
 	reg32 = read32(&gpio->port[port].cfg[reg]);
 	reg32 &= ~(0xf << bit);
 	reg32 |= (pad_func & 0xf) << bit;
-	write32(reg32, &gpio->port[port].cfg[reg]);
+	writel(reg32, &gpio->port[port].cfg[reg]);
 }
 
 /**
@@ -74,6 +74,6 @@ void gpio_set_multipin_func(u8 port, u32 pin_mask, u8 pad_func)
 			reg32 &= ~(0xf << bit);
 			reg32 |= (pad_func & 0xf) << bit;
 		}
-		write32(reg32, &gpio->port[port].cfg[reg]);
+		writel(reg32, &gpio->port[port].cfg[reg]);
 	}
 }
diff --git a/src/cpu/allwinner/a10/raminit.c b/src/cpu/allwinner/a10/raminit.c
index de24e03ec8..c1df4f427a 100644
--- a/src/cpu/allwinner/a10/raminit.c
+++ b/src/cpu/allwinner/a10/raminit.c
@@ -118,7 +118,7 @@ static void mctl_configure_hostport(void)
 	u32 i;
 
 	for (i = 0; i < 32; i++)
-		write32(hpcr_value[i], &dram->hpcr[i]);
+		writel(hpcr_value[i], &dram->hpcr[i]);
 }
 
 static void mctl_setup_dram_clock(u32 clk)
@@ -333,9 +333,9 @@ static void dramc_set_autorefresh_cycle(u32 clk)
 		tmp_val = tmp_val * 9 - 200;
 		reg32 |= tmp_val << 8;
 		reg32 |= 0x8 << 24;
-		write32(reg32, &dram->drr);
+		writel(reg32, &dram->drr);
 	} else {
-		write32(0x0, &dram->drr);
+		writel(0x0, &dram->drr);
 	}
 }
 
@@ -360,7 +360,7 @@ unsigned long dramc_init(struct dram_para *para)
 	a1x_gate_dram_clock_output();
 
 	/* select dram controller 1 */
-	write32(DRAM_CSEL_MAGIC, &dram->csel);
+	writel(DRAM_CSEL_MAGIC, &dram->csel);
 
 	mctl_itm_disable();
 	mctl_enable_dll0(para->tpr3);
@@ -390,7 +390,7 @@ unsigned long dramc_init(struct dram_para *para)
 	reg32 |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
 	reg32 |= DRAM_DCR_CMD_RANK_ALL;
 	reg32 |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
-	write32(reg32, &dram->dcr);
+	writel(reg32, &dram->dcr);
 
 	/* dram clock on */
 	a1x_ungate_dram_clock_output();
@@ -405,21 +405,21 @@ unsigned long dramc_init(struct dram_para *para)
 	reg32 = ((para->zq) >> 8) & 0xfffff;
 	reg32 |= ((para->zq) & 0xff) << 20;
 	reg32 |= (para->zq) & 0xf0000000;
-	write32(reg32, &dram->zqcr0);
+	writel(reg32, &dram->zqcr0);
 
 	/* set I/O configure register */
 	reg32 = 0x00cc0000;
 	reg32 |= (para->odt_en) & 0x3;
 	reg32 |= ((para->odt_en) & 0x3) << 30;
-	write32(reg32, &dram->iocr);
+	writel(reg32, &dram->iocr);
 
 	/* set refresh period */
 	dramc_set_autorefresh_cycle(para->clock);
 
 	/* set timing parameters */
-	write32(para->tpr0, &dram->tpr0);
-	write32(para->tpr1, &dram->tpr1);
-	write32(para->tpr2, &dram->tpr2);
+	writel(para->tpr0, &dram->tpr0);
+	writel(para->tpr1, &dram->tpr1);
+	writel(para->tpr2, &dram->tpr2);
 
 	if (para->type == DRAM_MEMORY_TYPE_DDR3) {
 		reg32 = DRAM_MR_BURST_LENGTH(0x0);
@@ -430,11 +430,11 @@ unsigned long dramc_init(struct dram_para *para)
 		reg32 |= DRAM_MR_CAS_LAT(para->cas);
 		reg32 |= DRAM_MR_WRITE_RECOVERY(0x5);
 	}
-	write32(reg32, &dram->mr);
+	writel(reg32, &dram->mr);
 
-	write32(para->emr1, &dram->emr);
-	write32(para->emr2, &dram->emr2);
-	write32(para->emr3, &dram->emr3);
+	writel(para->emr1, &dram->emr);
+	writel(para->emr2, &dram->emr2);
+	writel(para->emr3, &dram->emr3);
 
 	/* set DQS window mode */
 	clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
diff --git a/src/cpu/allwinner/a10/timer.c b/src/cpu/allwinner/a10/timer.c
index 7d5d1419c3..2ff88f528d 100644
--- a/src/cpu/allwinner/a10/timer.c
+++ b/src/cpu/allwinner/a10/timer.c
@@ -24,13 +24,13 @@ void init_timer(void)
 {
 	u32 reg32;
 	/* Load the timer rollover value */
-	write32(0xffffffff, &tmr0->interval);
+	writel(0xffffffff, &tmr0->interval);
 	/* Configure the timer to run from 24MHz oscillator, no prescaler */
 	reg32 = TIMER_CTRL_PRESC_DIV_EXP(0);
 	reg32 |= TIMER_CTRL_CLK_SRC_OSC24M;
 	reg32 |= TIMER_CTRL_RELOAD;
 	reg32 |= TIMER_CTRL_TMR_EN;
-	write32(reg32, &tmr0->ctrl);
+	writel(reg32, &tmr0->ctrl);
 }
 
 void udelay(unsigned usec)
@@ -61,6 +61,6 @@ void udelay(unsigned usec)
  */
 u8 a1x_get_cpu_chip_revision(void)
 {
-	write32(0, &timer_module->cpu_cfg);
+	writel(0, &timer_module->cpu_cfg);
 	return (read32(&timer_module->cpu_cfg) >> 6) & 0x3;
 }
diff --git a/src/cpu/allwinner/a10/twi.c b/src/cpu/allwinner/a10/twi.c
index 2584126874..b5d9880847 100644
--- a/src/cpu/allwinner/a10/twi.c
+++ b/src/cpu/allwinner/a10/twi.c
@@ -42,7 +42,7 @@ static void configure_clock(struct a1x_twi *twi, u32 speed_hz)
 	/* Pre-divide the clock by 8 */
 	n = 3;
 	m = (apb_clk >> n) / speed_hz;
-	write32(TWI_CLK_M(m) | TWI_CLK_N(n), &twi->clk);
+	writel(TWI_CLK_M(m) | TWI_CLK_N(n), &twi->clk);
 }
 
 void a1x_twi_init(u8 bus, u32 speed_hz)
@@ -53,9 +53,9 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
 	configure_clock(twi, speed_hz);
 
 	/* Enable the I²C bus */
-	write32(TWI_CTL_BUS_EN, &twi->ctl);
+	writel(TWI_CTL_BUS_EN, &twi->ctl);
 	/* Issue soft reset */
-	write32(1, &twi->reset);
+	writel(1, &twi->reset);
 
 	while (i-- && read32(&twi->reset))
 		udelay(1);
@@ -63,12 +63,12 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
 
 static void clear_interrupt_flag(struct a1x_twi *twi)
 {
-	write32(read32(&twi->ctl) & ~TWI_CTL_INT_FLAG, &twi->ctl);
+	writel(read32(&twi->ctl) & ~TWI_CTL_INT_FLAG, &twi->ctl);
 }
 
 static void i2c_send_data(struct a1x_twi *twi, u8 data)
 {
-	write32(data, &twi->data);
+	writel(data, &twi->data);
 	clear_interrupt_flag(twi);
 }
 
@@ -90,7 +90,7 @@ static void i2c_send_start(struct a1x_twi *twi)
 	reg32 = read32(&twi->ctl);
 	reg32 &= ~TWI_CTL_INT_FLAG;
 	reg32 |= TWI_CTL_M_START;
-	write32(reg32, &twi->ctl);
+	writel(reg32, &twi->ctl);
 
 	/* M_START is automatically cleared after condition is transmitted */
 	i = TWI_TIMEOUT;
@@ -106,7 +106,7 @@ static void i2c_send_stop(struct a1x_twi *twi)
 	reg32 = read32(&twi->ctl);
 	reg32 &= ~TWI_CTL_INT_FLAG;
 	reg32 |= TWI_CTL_M_STOP;
-	write32(reg32, &twi->ctl);
+	writel(reg32, &twi->ctl);
 }
 
 static int i2c_read(struct a1x_twi *twi, uint8_t chip,
diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c
index 407bd863aa..6883b4ea38 100644
--- a/src/cpu/allwinner/a10/uart.c
+++ b/src/cpu/allwinner/a10/uart.c
@@ -22,10 +22,10 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
 	div = (u16) uart_baudrate_divisor(baud_rate,
 		uart_platform_refclk(), 16);
 	/* Enable access to Divisor Latch register */
-	write32(UART8250_LCR_DLAB, &uart->lcr);
+	writel(UART8250_LCR_DLAB, &uart->lcr);
 	/* Set baudrate */
-	write32((div >> 8) & 0xff, &uart->dlh);
-	write32(div & 0xff, &uart->dll);
+	writel((div >> 8) & 0xff, &uart->dlh);
+	writel(div & 0xff, &uart->dll);
 	/* Set line control */
 	reg32 = (data_bits - 5) & UART8250_LCR_WLS_MSK;
 	switch (parity) {
@@ -40,12 +40,12 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
 	default:
 		break;
 	}
-	write32(reg32, &uart->lcr);
+	writel(reg32, &uart->lcr);
 }
 
 static void a10_uart_enable_fifos(struct a10_uart *uart)
 {
-	write32(UART8250_FCR_FIFO_EN, &uart->fcr);
+	writel(UART8250_FCR_FIFO_EN, &uart->fcr);
 }
 
 static int tx_fifo_full(struct a10_uart *uart)
@@ -83,7 +83,7 @@ static void a10_uart_tx_blocking(struct a10_uart *uart, u8 data)
 {
 	while (tx_fifo_full(uart)) ;
 
-	return write32(data, &uart->thr);
+	return writel(data, &uart->thr);
 }