src/acpi: Add APEI EINJ support

This adds full EINJ support with trigger action tables. The actual
error injection functionality is HW specific. Therefore, HW specific
code should call acpi_create_einj with an address where action table
resides. The default params of the action table are filled out by the
common code.  Control is then returned back to the caller to modify or
override default parameters. If no changes are needed, caller can
simply add the acpi table. At runtime, FW is responsible for filling
out the action table with the proper entries. The action table memory
is shared between FW and OS. This memory should be marked as reserved
in E820 table.

Tested on Deltalake mainboard.  Boot to OS, load the EINJ driver (
modprobe EINJ) and verify EINJ memory entries are in /proc/iomem.
Further tested by injecting errors via the APEI file nodes.  More
information on error injection can be referenced in the latest ACPI
spec.

Change-Id: I29c6a861c564ec104f2c097f3e49b3e6d38b040e
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rocky Phagura

1 files changed, 148 insertions, 0 deletions

diff --git a/src/acpi/acpi.c b/src/acpi/acpi.c
index 64af505941..5c3fe13614 100644
--- a/src/acpi/acpi.c
+++ b/src/acpi/acpi.c
@@ -785,6 +785,152 @@ void acpi_create_hpet(acpi_hpet_t *hpet)
 	header->checksum = acpi_checksum((void *)hpet, sizeof(acpi_hpet_t));
 }
 
+/*
+ * This method adds the ACPI error injection capability. It fills the default information.
+ * HW dependent code (caller) can modify the defaults upon return. If no changes are necessary
+ * and the defaults are acceptable then caller can simply add the table (acpi_add_table).
+ * INPUTS:
+ * einj - ptr to the starting location of EINJ table
+ * actions - number of actions to trigger an error (HW dependent)
+ * addr - address of trigger action table. This should be ACPI reserved memory and it will be
+ *        shared between OS and FW.
+ */
+void acpi_create_einj(acpi_einj_t *einj, uintptr_t addr, u8 actions)
+{
+	int i;
+	acpi_header_t *header = &(einj->header);
+	acpi_injection_header_t *inj_header = &(einj->inj_header);
+	acpi_einj_smi_t *einj_smi = (acpi_einj_smi_t *)addr;
+	acpi_einj_trigger_table_t *tat;
+	if (!header)
+		return;
+
+	printk(BIOS_DEBUG, "%s einj_smi = %p\n", __func__, einj_smi);
+	memset(einj_smi, 0, sizeof(acpi_einj_smi_t));
+	tat = (acpi_einj_trigger_table_t *)(einj_smi + sizeof(acpi_einj_smi_t));
+	tat->header_size =  16;
+	tat->revision =  0;
+	tat->table_size =  sizeof(acpi_einj_trigger_table_t) +
+		sizeof(acpi_einj_action_table_t) * actions - 1;
+	tat->entry_count = actions;
+	printk(BIOS_DEBUG, "%s trigger_action_table = %p\n", __func__, tat);
+
+	for (i = 0; i < actions; i++) {
+		tat->trigger_action[i].action = TRIGGER_ERROR;
+		tat->trigger_action[i].instruction = NO_OP;
+		tat->trigger_action[i].flags = FLAG_IGNORE;
+		tat->trigger_action[i].reg.space_id = ACPI_ADDRESS_SPACE_MEMORY;
+		tat->trigger_action[i].reg.bit_width = 64;
+		tat->trigger_action[i].reg.bit_offset = 0;
+		tat->trigger_action[i].reg.access_size = ACPI_ACCESS_SIZE_QWORD_ACCESS;
+		tat->trigger_action[i].reg.addr = 0;
+		tat->trigger_action[i].value = 0;
+		tat->trigger_action[i].mask = 0xFFFFFFFF;
+	}
+
+	acpi_einj_action_table_t default_actions[ACTION_COUNT] = {
+		[0] = {
+			.action = BEGIN_INJECT_OP,
+			.instruction = WRITE_REGISTER_VALUE,
+			.flags = FLAG_PRESERVE,
+			.reg = EINJ_REG_MEMORY((u64)(uintptr_t)&einj_smi->op_state),
+			.value = 0,
+			.mask = 0xFFFFFFFF
+		},
+		[1] = {
+			.action = GET_TRIGGER_ACTION_TABLE,
+			.instruction = READ_REGISTER,
+			.flags = FLAG_IGNORE,
+			.reg = EINJ_REG_MEMORY((u64)(uintptr_t)&einj_smi->trigger_action_table),
+			.value = 0,
+			.mask = 0xFFFFFFFFFFFFFFFF
+		},
+		[2] = {
+			.action = SET_ERROR_TYPE,
+			.instruction = WRITE_REGISTER,
+			.flags = FLAG_PRESERVE,
+			.reg = EINJ_REG_MEMORY((u64)(uintptr_t)&einj_smi->err_inject[0]),
+			.value = 0,
+			.mask = 0xFFFFFFFF
+		},
+		[3] = {
+			.action = GET_ERROR_TYPE,
+			.instruction = READ_REGISTER,
+			.flags = FLAG_IGNORE,
+			.reg = EINJ_REG_MEMORY((u64)(uintptr_t)&einj_smi->err_inj_cap),
+			.value = 0,
+			.mask = 0xFFFFFFFF
+		},
+		[4] = {
+			.action = END_INJECT_OP,
+			.instruction = WRITE_REGISTER_VALUE,
+			.flags = FLAG_PRESERVE,
+			.reg = EINJ_REG_MEMORY((u64)(uintptr_t)&einj_smi->op_state),
+			.value = 0,
+			.mask = 0xFFFFFFFF
+
+		},
+		[5] = {
+			.action = EXECUTE_INJECT_OP,
+			.instruction = WRITE_REGISTER_VALUE,
+			.flags = FLAG_PRESERVE,
+			.reg = EINJ_REG_IO(),
+			.value = 0x9a,
+			.mask = 0xFFFF,
+		},
+		[6] = {
+			.action = CHECK_BUSY_STATUS,
+			.instruction = READ_REGISTER_VALUE,
+			.flags = FLAG_IGNORE,
+			.reg = EINJ_REG_MEMORY((u64)(uintptr_t)&einj_smi->op_status),
+			.value = 1,
+			.mask = 1,
+		},
+		[7] = {
+			.action = GET_CMD_STATUS,
+			.instruction = READ_REGISTER,
+			.flags = FLAG_PRESERVE,
+			.reg = EINJ_REG_MEMORY((u64)(uintptr_t)&einj_smi->cmd_sts),
+			.value = 0,
+			.mask = 0x1fe,
+		},
+		[8] = {
+			.action = SET_ERROR_TYPE_WITH_ADDRESS,
+			.instruction = WRITE_REGISTER,
+			.flags = FLAG_PRESERVE,
+			.reg = EINJ_REG_MEMORY((u64)(uintptr_t)&einj_smi->setaddrtable),
+			.value = 1,
+			.mask = 0xffffffff
+		}
+	};
+
+	einj_smi->err_inj_cap = ACPI_EINJ_DEFAULT_CAP;
+	einj_smi->trigger_action_table = (u64) (uintptr_t)tat;
+
+	for (i = 0; i < ACTION_COUNT; i++)
+		printk(BIOS_DEBUG, "default_actions[%d].reg.addr is %llx\n", i,
+			default_actions[i].reg.addr);
+
+	memset((void *)einj, 0, sizeof(einj));
+
+	/* Fill out header fields. */
+	memcpy(header->signature, "EINJ", 4);
+	memcpy(header->oem_id, OEM_ID, 6);
+	memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
+	memcpy(header->asl_compiler_id, ASLC, 4);
+
+	header->asl_compiler_revision = asl_revision;
+	header->length = sizeof(acpi_einj_t);
+	header->revision = 1;
+	inj_header->einj_header_size = sizeof(acpi_injection_header_t);
+	inj_header->entry_count = ACTION_COUNT;
+
+	printk(BIOS_DEBUG, "%s einj->action_table = %p\n",
+		 __func__, einj->action_table);
+	memcpy((void *)einj->action_table, (void *)default_actions, sizeof(einj->action_table));
+	header->checksum = acpi_checksum((void *)einj, sizeof(einj));
+}
+
 void acpi_create_vfct(const struct device *device,
 		      acpi_vfct_t *vfct,
 		      unsigned long (*acpi_fill_vfct)(const struct device *device,
@@ -1756,6 +1902,8 @@ int get_acpi_table_revision(enum acpi_tables table)
 		return 1;
 	case RSDP: /* ACPI 2.0 upto 6.3: 2 */
 		return 2;
+	case EINJ:
+		return 1;
 	case HEST:
 		return 1;
 	case NHLT: