diff options
| author | Peter Stuge <peter@stuge.se> | 2010-10-13 06:23:02 +0000 |
|---|---|---|
| committer | Peter Stuge <peter@stuge.se> | 2010-10-13 06:23:02 +0000 |
| commit | 51eafdeae621f1b04db51c3b4a690fa993aa48a0 (patch) | |
| tree | e36ad669d05eecf00ce5826f8fb3fad8409ebec7 /src/Kconfig | |
| parent | f2573bd23727db672b22f3840ce91d08ec3aea5d (diff) | |
Enable or disable the power button in Kconfig
Some mainboards need to disable the power button to avoid turning off
right after being turned on, while other boards ship with a jumper over
the power button and should allow the user to configure the behavior.
This adds infrastructure in the form of four mutually exclusive options
which can be selected in a mainboard Kconfig (power button forced on/off,
and user-controllable with default on/off) and one result bool which
source code can test. (Enable the button or not.)
The options have been implemented in CS5536 code and for all mainboards
which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other
chipsets where applicable. Note that if chipset code uses the result
bool ENABLE_POWER_BUTTON, then every board using that chipset must
select one out of the four control options in order to build.
All touched boards should have unchanged behavior, except
pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the
power button can now be configured by the user.
Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed
to work as advertised on alix1c both with button enabled and disabled.
Includes additional traverse/geos changes from Nathan and
lippert/hurricane-lx changes from Jens to correctly use the new
feature on those boards.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Aurelien Guillaume <aurelien@iwi.me>
Acked-by: Nils Jacobs <njacobs8@hetnet.nl>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/Kconfig')
| -rw-r--r-- | src/Kconfig | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/src/Kconfig b/src/Kconfig index 690a1d4864..a61efe1a8e 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -736,4 +736,43 @@ config ID_SECTION_OFFSET hex default 0x10 +# The four POWER_BUTTON_DEFAULT_ENABLE, POWER_BUTTON_DEFAULT_DISABLE, +# POWER_BUTTON_FORCE_ENABLE and POWER_BUTTON_FORCE_DISABLE options are +# mutually exclusive. One of these options must be selected in the +# mainboard Kconfig if the chipset supports enabling and disabling of +# the power button. Chipset code uses the ENABLE_POWER_BUTTON option set +# in mainboard/Kconfig to know if the button should be enabled or not. + +config POWER_BUTTON_DEFAULT_ENABLE + def_bool n + help + Select when the board has a power button which can optionally be + disabled by the user. + +config POWER_BUTTON_DEFAULT_DISABLE + def_bool n + help + Select when the board has a power button which can optionally be + enabled by the user, e.g. when the board ships with a jumper over + the power switch contacts. + +config POWER_BUTTON_FORCE_ENABLE + def_bool n + help + Select when the board requires that the power button is always + enabled. + +config POWER_BUTTON_FORCE_DISABLE + def_bool n + help + Select when the board requires that the power button is always + disabled, e.g. when it has been hardwired to ground. + +config POWER_BUTTON_IS_OPTIONAL + bool + default y if POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE + default n if !(POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE) + help + Internal option that controls ENABLE_POWER_BUTTON visibility. + source src/Kconfig.deprecated_options |