libpayload/pci: Add pci_map_bus function for Qualcomm platform

Add 'pci_map_bus' function and PCIE_QCOM config for Qualcomm platform.

BUG=b:182963902,b:216686574,b:181098581
TEST=Verified on Qualcomm sc7280 development board with NVMe endpoint
(Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is
getting detected in response to 'storage init' command in depthcharge
CLI prompt.

Output logs:
 ->dpch: storage init
   Initializing NVMe controller 1e0f:0001
   Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY
   Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0
  *  0: NVMe Namespace 1
    1 devices total

Also verified NVMe boot path that is depthcharge is able to load the
kernel image from NVMe storage.

Change-Id: I7d1217502cbd7d4d0cdd298919ae82435630d61c
Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com>
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57615
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

3 files changed, 132 insertions, 0 deletions

diff --git a/payloads/libpayload/Kconfig b/payloads/libpayload/Kconfig
index 7c5a95bafd..fcef18a7f0 100644
--- a/payloads/libpayload/Kconfig
+++ b/payloads/libpayload/Kconfig
@@ -418,6 +418,11 @@ config PCIE_MEDIATEK
 	depends on PCI && !PCI_IO_OPS
 	default n
 
+config PCIE_QCOM
+	bool "Support for PCIe devices on Qualcomm platforms"
+	depends on PCI && !PCI_IO_OPS
+	default n
+
 config NVRAM
 	bool "Support for reading/writing NVRAM bytes"
 	depends on ARCH_X86 # for now
diff --git a/payloads/libpayload/drivers/Makefile.inc b/payloads/libpayload/drivers/Makefile.inc
index 204760757b..23471b83c4 100644
--- a/payloads/libpayload/drivers/Makefile.inc
+++ b/payloads/libpayload/drivers/Makefile.inc
@@ -37,6 +37,7 @@ libc-$(CONFIG_LP_PCI) += pci_map_bus_ops.c
 endif
 
 libc-$(CONFIG_LP_PCIE_MEDIATEK) += pcie_mediatek.c
+libc-$(CONFIG_LP_PCIE_QCOM) += pci_qcom.c
 
 libc-$(CONFIG_LP_SPEAKER) += speaker.c
 
diff --git a/payloads/libpayload/drivers/pci_qcom.c b/payloads/libpayload/drivers/pci_qcom.c
new file mode 100644
index 0000000000..ee159b952c
--- /dev/null
+++ b/payloads/libpayload/drivers/pci_qcom.c
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <libpayload.h>
+#include <pci.h>
+
+/*
+ * iATU Unroll-specific register definitions
+ */
+#define PCIE_ATU_UNR_REGION_CTRL1	0x00
+#define PCIE_ATU_UNR_REGION_CTRL2	0x04
+#define PCIE_ATU_UNR_LOWER_BASE		0x08
+#define PCIE_ATU_UNR_UPPER_BASE		0x0C
+#define PCIE_ATU_UNR_LIMIT		0x10
+#define PCIE_ATU_UNR_LOWER_TARGET	0x14
+#define PCIE_ATU_UNR_UPPER_TARGET	0x18
+#define PCIE_ATU_REGION_INDEX0		0x0
+#define PCIE_ATU_TYPE_CFG0		0x4
+#define PCIE_ATU_TYPE_CFG1		0x5
+#define PCIE_ATU_ENABLE			BIT(31)
+#define ATU_CTRL2			PCIE_ATU_UNR_REGION_CTRL2
+#define ATU_ENABLE			PCIE_ATU_ENABLE
+
+#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
+#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
+#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
+#define LINK_WAIT_IATU_US		1000
+#define LINK_WAIT_MAX_IATU_RETRIES	5
+
+/* Register address builder */
+#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((region) << 9)
+
+#define lower_32_bits(n)		((u32)(n))
+#define upper_32_bits(n)		((u32)(((n) >> 16) >> 16))
+
+/*
+ * ATU & endpoint config space base address offsets relative to
+ * PCIe controller base address.
+ */
+#define QCOM_ATU_BASE_OFFSET		0x1000
+#define QCOM_EP_CFG_OFFSET		0x100000
+#define QCOM_EP_CFG_SIZE		0x1000    /* 4K */
+
+static void dw_pcie_writel_iatu(void *atu_base, unsigned short index,
+				uint32_t reg, uint32_t val)
+{
+	uint32_t offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+	write32(atu_base + offset + reg, val);
+}
+
+static uint32_t dw_pcie_readl_iatu(void *atu_base, unsigned short index,
+				   uint32_t reg)
+{
+	uint32_t offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+	return read32(atu_base + offset + reg);
+}
+
+static void dw_pcie_prog_outbound_atu(void *atu_base, unsigned short index,
+				      unsigned int type, uint64_t cfg_addr,
+				      uint64_t pcie_addr, uint32_t cfg_size)
+{
+	dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_LOWER_BASE,
+			    lower_32_bits(cfg_addr));
+	dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_UPPER_BASE,
+			    upper_32_bits(cfg_addr));
+	dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_LIMIT,
+			    lower_32_bits(cfg_addr + cfg_size - 1));
+	dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_LOWER_TARGET,
+			    lower_32_bits(pcie_addr));
+	dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_UPPER_TARGET,
+			    upper_32_bits(pcie_addr));
+	dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_REGION_CTRL1, type);
+	dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_REGION_CTRL2,
+			    PCIE_ATU_ENABLE);
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	if (retry(LINK_WAIT_MAX_IATU_RETRIES,
+		  (dw_pcie_readl_iatu(atu_base, index, ATU_CTRL2) & ATU_ENABLE),
+		  udelay(LINK_WAIT_IATU_US)))
+		return;
+
+	printf("outbound iATU is couldn't be enabled after 5ms\n");
+}
+
+/* Get PCIe MMIO configuration space base address */
+uintptr_t pci_map_bus(pcidev_t dev)
+{
+	unsigned int atu_type, busdev;
+	uint32_t config_size;
+	void *cntrlr_base, *config_base, *atu_base;
+	unsigned int current_bus = PCI_BUS(dev);
+	unsigned int devfn = (PCI_SLOT(dev) << 3) | PCI_FUNC(dev);
+	static pcidev_t current_dev;
+
+	/*
+	 * Extract PCIe controller base from coreboot and derive the ATU and
+	 * endpoint config base addresses from it.
+	 */
+	cntrlr_base = (void *)lib_sysinfo.pcie_ctrl_base;
+	config_base = (void *)cntrlr_base + QCOM_EP_CFG_OFFSET;
+	config_size = (uint32_t)QCOM_EP_CFG_SIZE;
+	atu_base = (void *)cntrlr_base + QCOM_ATU_BASE_OFFSET;
+
+	/*
+	 * Cache the dev. For same dev, ATU mapping is not needed for each
+	 * request.
+	 */
+	if (current_dev == dev)
+		goto out;
+
+	current_dev = dev;
+
+	busdev = PCIE_ATU_BUS(current_bus)   |
+		 PCIE_ATU_DEV(PCI_SLOT(dev)) |
+		 PCIE_ATU_FUNC(PCI_FUNC(dev));
+
+	atu_type = current_bus == 1 ? PCIE_ATU_TYPE_CFG0 : PCIE_ATU_TYPE_CFG1;
+
+	dw_pcie_prog_outbound_atu(atu_base, PCIE_ATU_REGION_INDEX0, atu_type,
+				  (uint64_t)config_base, busdev, config_size);
+out:
+	return (uintptr_t)config_base + (QCOM_EP_CFG_SIZE * devfn);
+}