diff options
| author | Gabe Black <gabeblack@google.com> | 2013-08-09 04:27:35 -0700 |
|---|---|---|
| committer | Isaac Christensen <isaac.christensen@se-eng.com> | 2014-08-05 18:44:08 +0200 |
| commit | 1ee2c6dbdfe7e35ab5e25a6136eab824ed2fec8f (patch) | |
| tree | fabae429ff872caed315281a0c243fa0bd753565 /payloads/libpayload/drivers/serial.c | |
| parent | b77431336e44ba9721f18220e2a7dedafe250528 (diff) | |
libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig.
When libpayload header files are included in the payload itself, it's possible
that the payloads config settings will conflict with the ones in libpayload.
It's also possible for the libpayload config settings to conflict with the
payloads. To avoid that, the libpayload config settings have _LP_ (for
libpayload) added to them. The symbols themselves as defined in the Config.in files
are still the same, but the prefix added to them is now CONFIG_LP_ instead of just
CONFIG_.
Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65303
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6427
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Diffstat (limited to 'payloads/libpayload/drivers/serial.c')
| -rw-r--r-- | payloads/libpayload/drivers/serial.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/payloads/libpayload/drivers/serial.c b/payloads/libpayload/drivers/serial.c index 0d2964b771..92782a0ee6 100644 --- a/payloads/libpayload/drivers/serial.c +++ b/payloads/libpayload/drivers/serial.c @@ -39,7 +39,7 @@ static int serial_is_mem_mapped = 0; static uint8_t serial_read_reg(int offset) { -#ifdef CONFIG_IO_ADDRESS_SPACE +#ifdef CONFIG_LP_IO_ADDRESS_SPACE if (!serial_is_mem_mapped) return inb(IOBASE + offset); else @@ -49,7 +49,7 @@ static uint8_t serial_read_reg(int offset) static void serial_write_reg(uint8_t val, int offset) { -#ifdef CONFIG_IO_ADDRESS_SPACE +#ifdef CONFIG_LP_IO_ADDRESS_SPACE if (!serial_is_mem_mapped) outb(val, IOBASE + offset); else @@ -57,7 +57,7 @@ static void serial_write_reg(uint8_t val, int offset) writeb(val, MEMBASE + offset); } -#ifdef CONFIG_SERIAL_SET_SPEED +#ifdef CONFIG_LP_SERIAL_SET_SPEED static void serial_hardware_init(int speed, int word_bits, int parity, int stop_bits) { @@ -102,7 +102,7 @@ void serial_init(void) (lib_sysinfo.serial->type == CB_SERIAL_TYPE_MEMORY_MAPPED); if (!serial_is_mem_mapped) { -#ifdef CONFIG_IO_ADDRESS_SPACE +#ifdef CONFIG_LP_IO_ADDRESS_SPACE if ((inb(IOBASE + 0x05) == 0xFF) && (inb(IOBASE + 0x06) == 0xFF)) { printf("IO space mapped serial not present."); @@ -114,8 +114,8 @@ void serial_init(void) #endif } -#ifdef CONFIG_SERIAL_SET_SPEED - serial_hardware_init(CONFIG_SERIAL_BAUD_RATE, 8, 0, 1); +#ifdef CONFIG_LP_SERIAL_SET_SPEED + serial_hardware_init(CONFIG_LP_SERIAL_BAUD_RATE, 8, 0, 1); #endif console_add_input_driver(&consin); console_add_output_driver(&consout); |