libpayload: serial: Move the depthcharge serial drivers into libpayload.

These drivers need to be ready right away and never really fit into the
depthcharge driver model anyway.

CQ-DEPEND=CL:194063
BUG=None
TEST=Built and booted on nyan and peach_pit. Built for nyan_big, nyan_blaze,
and daisy.
BRANCH=None

Original-Change-Id: I9570dee53c57d42ef4cd956f66a878ce39a2dc20
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194057
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 26e18f680c93fc990a3d1057c164f19859634a9f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>

Change-Id: Ia2233e2bd821d8de8d2d57a9423aeb74be7efd93
Reviewed-on: http://review.coreboot.org/7224
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)

1 files changed, 0 insertions, 245 deletions

diff --git a/payloads/libpayload/drivers/serial.c b/payloads/libpayload/drivers/serial.c
deleted file mode 100644
index a4c1b1a2ab..0000000000
--- a/payloads/libpayload/drivers/serial.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * This file is part of the libpayload project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2008 Ulf Jordan <jordan@chalmers.se>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <libpayload-config.h>
-#include <libpayload.h>
-
-#define IOBASE lib_sysinfo.serial->baseaddr
-#define MEMBASE (phys_to_virt(IOBASE))
-
-static int serial_hardware_is_present = 0;
-static int serial_is_mem_mapped = 0;
-
-static uint8_t serial_read_reg(int offset)
-{
-#ifdef CONFIG_LP_IO_ADDRESS_SPACE
-	if (!serial_is_mem_mapped)
-		return inb(IOBASE + offset);
-	else
-#endif
-		return readb(MEMBASE + offset);
-}
-
-static void serial_write_reg(uint8_t val, int offset)
-{
-#ifdef CONFIG_LP_IO_ADDRESS_SPACE
-	if (!serial_is_mem_mapped)
-		outb(val, IOBASE + offset);
-	else
-#endif
-		writeb(val, MEMBASE + offset);
-}
-
-#ifdef CONFIG_LP_SERIAL_SET_SPEED
-static void serial_hardware_init(int speed, int word_bits,
-				 int parity, int stop_bits)
-{
-	unsigned char reg;
-
-	/* Disable interrupts. */
-	serial_write_reg(0, 0x01);
-
-	/* Assert RTS and DTR. */
-	serial_write_reg(3, 0x04);
-
-	/* Set the divisor latch. */
-	reg = serial_read_reg(0x03);
-	serial_write_reg(reg | 0x80, 0x03);
-
-	/* Write the divisor. */
-	uint16_t divisor = 115200 / speed;
-	serial_write_reg(divisor & 0xFF, 0x00);
-	serial_write_reg(divisor >> 8, 0x01);
-
-	/* Restore the previous value of the divisor.
-	 * And set 8 bits per character */
-	serial_write_reg((reg & ~0x80) | 3, 0x03);
-}
-#endif
-
-static struct console_input_driver consin = {
-	.havekey = &serial_havechar,
-	.getchar = &serial_getchar
-};
-
-static struct console_output_driver consout = {
-	.putchar = &serial_putchar
-};
-
-void serial_init(void)
-{
-	if (!lib_sysinfo.serial)
-		return;
-
-	serial_is_mem_mapped =
-		(lib_sysinfo.serial->type == CB_SERIAL_TYPE_MEMORY_MAPPED);
-
-	if (!serial_is_mem_mapped) {
-#ifdef CONFIG_LP_IO_ADDRESS_SPACE
-		if ((inb(IOBASE + 0x05) == 0xFF) &&
-				(inb(IOBASE + 0x06) == 0xFF)) {
-			printf("IO space mapped serial not present.");
-			return;
-		}
-#else
-		printf("IO space mapped serial not supported.");
-		return;
-#endif
-	}
-
-#ifdef CONFIG_LP_SERIAL_SET_SPEED
-	serial_hardware_init(CONFIG_LP_SERIAL_BAUD_RATE, 8, 0, 1);
-#endif
-}
-
-void serial_console_init(void)
-{
-	if (!lib_sysinfo.serial)
-		return;
-
-	serial_init();
-
-	console_add_input_driver(&consin);
-	console_add_output_driver(&consout);
-	serial_hardware_is_present = 1;
-}
-
-void serial_putchar(unsigned int c)
-{
-	if (!serial_hardware_is_present)
-		return;
-	while ((serial_read_reg(0x05) & 0x20) == 0) ;
-	serial_write_reg(c, 0x00);
-}
-
-int serial_havechar(void)
-{
-	if (!serial_hardware_is_present)
-		return 0;
-	return serial_read_reg(0x05) & 0x01;
-}
-
-int serial_getchar(void)
-{
-	if (!serial_hardware_is_present)
-		return -1;
-	while (!serial_havechar()) ;
-	return serial_read_reg(0x00);
-}
-
-/*  These are thinly veiled vt100 functions used by curses */
-
-#define VT100_CLEAR       "\e[H\e[J"
-/* These defines will fail if you use bold and reverse at the same time.
- * Switching off one of them will switch off both. tinycurses knows about
- * this and does the right thing.
- */
-#define VT100_SBOLD       "\e[1m"
-#define VT100_EBOLD       "\e[m"
-#define VT100_SREVERSE    "\e[7m"
-#define VT100_EREVERSE    "\e[m"
-#define VT100_CURSOR_ADDR "\e[%d;%dH"
-#define VT100_CURSOR_ON   "\e[?25l"
-#define VT100_CURSOR_OFF  "\e[?25h"
-/* The following smacs/rmacs are actually for xterm; a real vt100 has
-   enacs=\E(B\E)0, smacs=^N, rmacs=^O.  */
-#define VT100_SMACS       "\e(0"
-#define VT100_RMACS       "\e(B"
-/* A vt100 doesn't do color, setaf/setab below are from xterm-color. */
-#define VT100_SET_COLOR   "\e[3%d;4%dm"
-
-static void serial_putcmd(const char *str)
-{
-	while (*str)
-		serial_putchar(*(str++));
-}
-
-void serial_clear(void)
-{
-	serial_putcmd(VT100_CLEAR);
-}
-
-void serial_start_bold(void)
-{
-	serial_putcmd(VT100_SBOLD);
-}
-
-void serial_end_bold(void)
-{
-	serial_putcmd(VT100_EBOLD);
-}
-
-void serial_start_reverse(void)
-{
-	serial_putcmd(VT100_SREVERSE);
-}
-
-void serial_end_reverse(void)
-{
-	serial_putcmd(VT100_EREVERSE);
-}
-
-void serial_start_altcharset(void)
-{
-	serial_putcmd(VT100_SMACS);
-}
-
-void serial_end_altcharset(void)
-{
-	serial_putcmd(VT100_RMACS);
-}
-
-/**
- * Set the foreground and background colors on the serial console.
- *
- * @param fg Foreground color number.
- * @param bg Background color number.
- */
-void serial_set_color(short fg, short bg)
-{
-	char buffer[32];
-	snprintf(buffer, sizeof(buffer), VT100_SET_COLOR, fg, bg);
-	serial_putcmd(buffer);
-}
-
-void serial_set_cursor(int y, int x)
-{
-	char buffer[32];
-	snprintf(buffer, sizeof(buffer), VT100_CURSOR_ADDR, y + 1, x + 1);
-	serial_putcmd(buffer);
-}
-
-void serial_cursor_enable(int state)
-{
-	if (state)
-		serial_putcmd(VT100_CURSOR_ON);
-	else
-		serial_putcmd(VT100_CURSOR_OFF);
-}