diff options
author | Michael Niewöhner <foss@mniewoehner.de> | 2020-11-08 19:32:13 +0100 |
---|---|---|
committer | Michael Niewöhner <foss@mniewoehner.de> | 2020-12-30 00:31:47 +0000 |
commit | 6c3ba50a444d969c3086ab18d5123f119295748b (patch) | |
tree | ea6ff716c713e5fe110d66d718e39544359350e7 /payloads/coreinfo | |
parent | 8281a537666081b7785178c4375b5e23e6e2a93a (diff) |
mb/supermicro/x11ssh-tf: configure "POST complete" gpio for IPMI driver
Configure the "POST complete" gpio in the devicetree for the BMC/IPMI
driver and set the pad's initial value to 0 since the signal is active-
high and shall be set by the IPMI/BMC driver.
Also add the pad to early gpio config, since it is expected to have an
external pull-up like X11SSM-F, which is wrong and would confuse the BMC.
Test: Boot the machine via the BMC web interface and check that sensors
get read correctly by the IPMI firmware when the payload starts.
Tested successfully.
Change-Id: If344b2271bfc8d50b8b64847109818f96f2abbcb
Tested-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Diffstat (limited to 'payloads/coreinfo')
0 files changed, 0 insertions, 0 deletions