google/eve: Fix FPC support

Currently UART0 GPIOs are being put into native mode during FSP-S
stage, so have ramstage re-configure them back to regular GPIO mode.

GPP_C8 does not seem to be functioning properly when routed to the
APIC, possibly due to the UART0 being enabled even though it is unused,
which is required because UART0 is PCI 1e.0 and so must be present for
other 1e.x functions to be enumerated.  Instead, use this pin as a GPIO
interrupt so it will be routed through the GPIO controller at IRQ 14.

GPP_C9 was inverted and was only working because the pin was being
re-configured in FSP-S.

Also export the reset gpio as a device property so it can be used by
the kernel driver, which will stop it from complaining at boot.

BUG=chrome-os-partner:61233
TEST=verify that the interrupt and device is functional in the OS

Change-Id: Iaf9efbf50a13a981c6a9bbd507475777837e9c12
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/18395
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>

0 files changed, 0 insertions, 0 deletions