armv7: Add temporary build script for CrOS devs

This build script will:
- Build coreboot.rom
- Download BL1, extract and place it if necessary
- Do a partial flash via Servo, using some flashrom trickery to
  make the process fast.

This probably should not be submitted, unless the intention is to
back it out eventually.

Credit goes to Hung-Te for writing the original version.

Change-Id: Ia7a4bea6077416fc06768a5de5ee07edc973ede2
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2134
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 82 insertions, 0 deletions

diff --git a/cros/build b/cros/build
new file mode 100755
index 0000000000..13f7d925c9
--- /dev/null
+++ b/cros/build
@@ -0,0 +1,82 @@
+#!/bin/sh
+
+SCRIPT="$0"
+SCRIPT_DIR="$(dirname "$(readlink -f "$0")")"
+
+OUTPUT="build/coreboot.rom"
+TMP_DIFF="$SCRIPT_DIR/.image-diff.bin"
+FLASHROM="/usr/local/sbin/flashrom"
+
+BL1_NAME="E5250.nbl1.bin"
+BL1_PATH="3rdparty/cpu/samsung/exynos5250/"
+BL1_URL="http://commondatastorage.googleapis.com/chromeos-localmirror/distfiles/exynos-pre-boot-0.0.2-r8.tbz2"
+
+die() {
+  echo "$*" >&2
+  exit 1
+}
+
+create_diff_128k() {
+  local image_file="$1"
+  local diff_file="$2"
+  cp -f "$image_file" "$diff_file"
+  dd if=/dev/zero of=$diff_file bs=1 count=$((128*1024)) conv=notrunc
+}
+
+fast_flash_image() {
+  local image_file="$1"
+  local diff_file="$2"
+  dut-control spi2_buf_en:on spi2_buf_on_flex_en:on spi2_vref:pp1800
+  sudo ${FLASHROM} -p ft2232_spi:type=servo-v2,port=a -w "$image_file" -V \
+    --noverify --ignore-fmap --diff "$diff_file"
+  dut-control spi2_buf_en:off spi2_buf_on_flex_en:off spi2_vref:off
+}
+
+get_bl1() {
+  wget "${BL1_URL}" -O /tmp/bl1.tbz2
+  tar jxvf /tmp/bl1.tbz2
+  mkdir -p "${BL1_PATH}"
+  mv "exynos-pre-boot/firmware/${BL1_NAME}" "${BL1_PATH}"
+  rm -rf exynos-pre-boot
+  if [ ! -e "${BL1_PATH}/${BL1_NAME}" ]; then
+    echo "Error getting BL1"
+    exit 1
+  fi
+}
+
+merge_bl1() {
+  local outfile="$1"
+  local bl1="${BL1_PATH}/${BL1_NAME}"
+
+  if [ ! -e "$bl1" ]; then
+    get_bl1
+  fi
+
+  # use the new BL1 which supports 30KB BL2/SPL/Coreboot
+  local size="$(stat -c "%s" "$outfile")"
+  local bl1_size="$(stat -c "%s" "$bl1")"
+
+  [ "$bl1_size" = "$((0x2000))" ] || die "Incorrect BL1 input file."
+  dd if="$bl1" of=${outfile} conv=notrunc
+}
+
+is_servod_ready() {
+  ps -C servod >/dev/null 2>&1
+}
+
+main() {
+  make
+  merge_bl1 "$OUTPUT"
+  create_diff_128k "$OUTPUT" "$TMP_DIFF"
+  echo "OK: Generated image (with BL1) in $OUTPUT"
+  if is_servod_ready; then
+    echo "servod detected - flashing into device."
+    fast_flash_image "$OUTPUT" "$TMP_DIFF"
+    echo "OK: Generated and flashed 128k of image into device via servo."
+  else
+    echo "(servod is not running, flashing into device is skipped)"
+  fi
+}
+
+set -e
+main "$@"