Documentation: Add Montevina ThinkPads common page

- Add a common page about Montevina ThinkPads.
- Describe how to disable ME and remove its firmware on these models.
- Describe vendor flash layouts.

Thanks to swiftgeek for his help when writing this, especially the last
paragraph and flash layouts.

Change-Id: I85917821efe63fff4b933b6226e99c17b63eb1b9
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

2 files changed, 165 insertions, 0 deletions

diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md
index 126a8fb875..e46e0f37af 100644
--- a/Documentation/mainboard/index.md
+++ b/Documentation/mainboard/index.md
@@ -77,6 +77,7 @@ The boards in this section are not real mainboards, but emulators.
 
 ### GM45 series
 
+- [X200 / T400 / T500 / X301 common](lenovo/montevina_series.md)
 - [X301](lenovo/x301.md)
 
 ### Sandy Bridge series
diff --git a/Documentation/mainboard/lenovo/montevina_series.md b/Documentation/mainboard/lenovo/montevina_series.md
new file mode 100644
index 0000000000..ab858a61e5
--- /dev/null
+++ b/Documentation/mainboard/lenovo/montevina_series.md
@@ -0,0 +1,164 @@
+# Lenovo X200 / T400 / T500 / X301 common
+
+These models are sold with either 8 MiB or 4 MiB flash chip. You can identify
+the chip in your machine through flashrom:
+```console
+# flashrom -p internal
+```
+
+Note that this does not allow you to determine whether the chip is in a SOIC-8
+or a SOIC-16 package.
+
+## Installing without ME firmware
+
+```eval_rst
+.. Note::
+   **ThinkPad R500** has slightly different flash layout (it doesn't have
+   ``gbe`` region), so the process would be a little different for that model.
+```
+
+On Montevina machines it's possible to disable ME and remove its firmware from
+SPI flash by modifying the flash descriptor. This also makes it possible to use
+the flash region the ME used for `bios` region, allowing for much larger
+payloads.
+
+First of all create a backup of your ROM with an external programmer:
+```console
+# flashrom -p YOUR_PROGRAMMER -r backup.rom
+```
+
+Then, split the IFD regions into separate filse with ifdtool. You will need
+`flashregion_3_gbe.bin` later.
+```console
+$ ifdtool -x backup.rom
+```
+
+Now you need to patch the flash descriptor. You can either [modify the one from
+your backup with **ifdtool**](#modifying-flash-descriptor-using-ifdtool), or
+[generate a completely new one with **bincfg**](#creating-a-new-flash-descriptor-using-bincfg).
+
+#### Modifying flash descriptor using ifdtool
+
+Pick the layout according to your chip size from the table below and save it to
+the `new_layout.txt` file:
+
+```eval_rst
++---------------------------+---------------------------+---------------------------+
+| 4 MB chip                 | 8 MB chip                 | 16 MB chip                |
++===========================+===========================+===========================+
+| .. code-block:: none      | .. code-block:: none      | .. code-block:: none      |
+|                           |                           |                           |
+|    00000000:00000fff fd   |    00000000:00000fff fd   |    00000000:00000fff fd   |
+|    00001000:00002fff gbe  |    00001000:00002fff gbe  |    00001000:00002fff gbe  |
+|    00003000:003fffff bios |    00003000:007fffff bios |    00003000:01ffffff bios |
+|    00fff000:00000fff pd   |    00fff000:00000fff pd   |    00fff000:00000fff pd   |
+|    00fff000:00000fff me   |    00fff000:00000fff me   |    00fff000:00000fff me   |
++---------------------------+---------------------------+---------------------------+
+```
+
+The last two lines define `pd` and `me` regions of negative size. This way
+ifdtool will mark those as unused.
+
+Update regions in the flash descrpitor (it was extracted previously with
+`ifdtool -x`):
+```console
+$ ifdtool -n new_layout.txt flashregion_0_flashdescriptor.bin
+```
+
+Set `MeDisable` bit in ICH0 and MCH0 straps:
+```console
+$ ifdtool -M 1 flashregion_0_flashdescriptor.bin.new
+```
+
+Delete previous descriptors and rename the final one:
+```console
+$ rm flashregion_0_flashdescriptor.bin
+$ rm flashregion_0_flashdescriptor.bin.new
+$ mv flashregion_0_flashdescriptor.bin.new.new flashregion_0_flashdescriptor.bin
+```
+
+Continue to the [Configuring coreboot](#configuring-coreboot) section.
+
+#### Creating a new flash descriptor using bincfg
+
+There is a tool to generate a modified flash descriptor called **bincfg**. Go to
+`util/bincfg` and build it:
+```console
+$ cd util/bincfg
+$ make
+```
+
+If your flash is not 8 MB, you need to change values of `flcomp_density1` and
+`flreg1_limit` in the ifd-x200.set file according to following table:
+
+```eval_rst
++-----------------+-------+-------+--------+
+|                 | 4 MB  | 8 MB  | 16 MB  |
++=================+=======+=======+========+
+| flcomp_density1 | 0x3   | 0x4   | 0x5    |
++-----------------+-------+-------+--------+
+| flreg1_limit    | 0x3ff | 0x7ff | 0x1fff |
++-----------------+-------+-------+--------+
+```
+
+Then create the flash descriptor:
+```console
+$ ./bincfg ifd-x200.spec ifd-x200.set ifd.bin
+```
+
+#### Configuring coreboot
+
+Now configure coreboot. You need to select correct chip size and specify paths
+to flash descriptor and gbe dump.
+
+```
+Mainboard --->
+    ROM chip size (8192 KB (8 MB)) # According to your chip
+    (0x7fd000) Size of CBFS filesystem in ROM # or 0x3fd000 for 4 MB chip / 0x1ffd000 for 16 MB chip
+
+Chipset --->
+    [*] Add Intel descriptor.bin file
+    # Note: if you used bincfg, specify path to generated util/bincfg/ifd.bin
+    (/path/to/flashregion_0_flashdescriptor.bin) Path and filename of the descriptor.bin file
+
+    [*] Add gigabit ethernet configuration
+    (/path/to/flashregion_3_gbe.bin) Path to gigabit ethernet configuration
+```
+
+Then build coreboot and flash whole `build/coreboot.rom` to the chip.
+
+## Installing with ME firmware
+
+To install coreboot and keep ME working, you don't need to do anything special
+with the flash descriptor. Just flash only `bios` externally and don't touch any
+other regions:
+```console
+# flashrom -p YOUR_PROGRAMMER -w coreboot.rom --ifd -i bios
+```
+
+## Flash layout
+
+The flash layouts of the OEM firmware are as follows:
+
+```eval_rst
++---------------------------------+---------------------------------+
+| 4 MB chip                       | 8 MB chip                       |
++=================================+=================================+
+| .. code-block:: none            | .. code-block:: none            |
+|                                 |                                 |
+|    00000000:00000fff fd         |    00000000:00000fff fd         |
+|    00001000:001f5fff me         |    00001000:005f5fff me         |
+|    001f6000:001f7fff gbe        |    005f6000:005f7fff gbe        |
+|    001f8000:001fffff pd         |    005f8000:005fffff pd         |
+|    00200000:003fffff bios       |    00600000:007fffff bios       |
+|    00290000:002affff ec         |    00690000:006affff ec         |
+|    003e0000:003fffff bootblock  |    007e0000:007fffff bootblock  |
++---------------------------------+---------------------------------+
+```
+
+On each boot of vendor BIOS `ec` area in flash is checked for having firmware
+there, and if there is one, it proceedes to update firmware on H8S/2116 (when
+both external power and main battery are attached). Once update is performed,
+first 64 KB of `ec` area is erased. Visit
+[thinkpad-ec repository](https://github.com/hamishcoleman/thinkpad-ec) to learn
+more about how to extract EC firmware from vendor updates.