Docs/tutorial: Update markdown for part1

The tutorial documents were updated from the wiki very early in the
transition to markdown, and the style has changed over time.  This
updates the markdown style to match documents that are being created
now.

Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I619c04f420042f530335482c30070436f9190865
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>

1 files changed, 108 insertions, 37 deletions

diff --git a/Documentation/tutorial/part1.md b/Documentation/tutorial/part1.md
index 84b77afad2..8902f6e035 100644
--- a/Documentation/tutorial/part1.md
+++ b/Documentation/tutorial/part1.md
@@ -6,31 +6,52 @@ coreboot toolchain. In same cases you will find specific instructions for Debian
 Fedora (dnf) and Arch Linux (pacman) based package management systems. Use the
 instructions according to your system.
 
+** Note: Summaries of each of the steps are at the end of the document. **
+
+
 Download, configure, and build coreboot
 ---------------------------------------
 
+
 ### Step 1 - Install tools and libraries needed for coreboot
-    $ sudo apt-get install -y bison build-essential curl flex git gnat libncurses5-dev m4 zlib1g-dev
-    $ sudo pacman -S base-devel curl git gcc-ada ncurses zlib
-    $ sudo dnf install git make gcc-gnat flex bison xz bzip2 gcc g++ ncurses-devel wget zlib-devel patch
+
+Debian based distros:
+`sudo apt-get install -y bison build-essential curl flex git gnat libncurses5-dev m4 zlib1g-dev`
+
+Arch based distros:
+`sudo pacman -S base-devel curl git gcc-ada ncurses zlib`
+
+Redhat based distros:
+`sudo dnf install git make gcc-gnat flex bison xz bzip2 gcc g++ ncurses-devel wget zlib-devel patch`
+
 
 ### Step 2 - Download coreboot source tree
-    $ git clone https://review.coreboot.org/coreboot
-    $ cd coreboot
+
+```Bash
+git clone https://review.coreboot.org/coreboot
+cd coreboot
+```
+
+
 
 ### Step 3 - Build the coreboot toolchain
+
 Please note that this can take a significant amount of time. Use `CPUS=` to
 specify number of `make` jobs to run in parallel.
 
 This will list toolchain options and supported architectures:
 
-    $ make help_toolchain
+```Bash
+make help_toolchain
+```
 
 Here are some examples:
 
-    $ make crossgcc-i386 CPUS=$(nproc)       # build i386 toolchain
-    $ make crossgcc-aarch64 CPUS=$(nproc)    # build Aarch64 toolchain
-    $ make crossgcc-riscv CPUS=$(nproc)      # build RISC-V toolchain
+```Bash
+make crossgcc-i386 CPUS=$(nproc)       # build i386 toolchain
+make crossgcc-aarch64 CPUS=$(nproc)    # build Aarch64 toolchain
+make crossgcc-riscv CPUS=$(nproc)      # build RISC-V toolchain
+```
 
 Note that the i386 toolchain is currently used for all x86 platforms, including
 x86_64.
@@ -39,76 +60,113 @@ Also note that you can possibly use your system toolchain, but the results are
 not reproducible, and may have issues, so this is not recommended.  See step 5
 to use your system toolchain.
 
+
 ### Step 4 - Build the payload - coreinfo
-    $ make -C payloads/coreinfo olddefconfig
-    $ make -C payloads/coreinfo
+
+```Bash
+make -C payloads/coreinfo olddefconfig
+make -C payloads/coreinfo
+```
+
 
 ### Step 5 - Configure the build
 
 ##### Configure your mainboard
-    $ make menuconfig
-       select 'Mainboard' menu
-       Beside 'Mainboard vendor' should be '(Emulation)'
-       Beside 'Mainboard model' should be 'QEMU x86 i440fx/piix4'
-       select < Exit >
+
+```Bash
+make menuconfig
+```
+
+Do the next steps in the menu:
+
+```Text
+select 'Mainboard' menu
+Beside 'Mainboard vendor' should be '(Emulation)'
+Beside 'Mainboard model' should be 'QEMU x86 i440fx/piix4'
+select < Exit >
+```
+
 These should be the default selections, so if anything else was set, run
 `make distclean` to remove your old config file and start over.
 
 ##### Optionally use your system toolchain (Again, not recommended)
-       select 'General Setup' menu
-       select 'Allow building with any toolchain'
-       select < Exit >
+
+```Text
+select 'General Setup' menu
+select 'Allow building with any toolchain'
+select < Exit >
+```
 
 ##### Select the payload
-       select 'Payload' menu
-       select 'Add a Payload'
-       choose 'An Elf executable payload'
-       select 'Payload path and filename'
-       enter 'payloads/coreinfo/build/coreinfo.elf'
-       select < Exit >
-       select < Exit >
-       select < Yes >
+
+```Text
+select 'Payload' menu
+select 'Add a Payload'
+choose 'An Elf executable payload'
+select 'Payload path and filename'
+enter 'payloads/coreinfo/build/coreinfo.elf'
+select < Exit >
+select < Exit >
+select < Yes >
+```
 
 ##### Check your configuration (optional step):
 
-    $ make savedefconfig
-    $ cat defconfig
+```Bash
+make savedefconfig
+cat defconfig
+```
 
 There should only be two lines (or 3 if you're using the system toolchain):
 
-    CONFIG_PAYLOAD_ELF=y
-    CONFIG_PAYLOAD_FILE="payloads/coreinfo/build/coreinfo.elf"
+```Text
+CONFIG_PAYLOAD_ELF=y
+CONFIG_PAYLOAD_FILE="payloads/coreinfo/build/coreinfo.elf"
+```
 
 ### Step 6 - build coreboot
-    $ make
+
+```Bash
+make
+```
 
 At the end of the build, you should see:
 
-    Build emulation/qemu-i440fx (QEMU x86 i440fx/piix4)
+`Build emulation/qemu-i440fx (QEMU x86 i440fx/piix4)``
 
 This means your build was successful. The output from the build is in the build
 directory. build/coreboot.rom is the full rom file.
 
+
 Test the image using QEMU
 -------------------------
 
+
 ### Step 7 - Install QEMU
-    $ sudo apt-get install -y qemu
-    $ sudo pacman -S qemu
-    $ sudo dnf install qemu
+
+* Debian: `sudo apt-get install -y qemu`
+* Arch: `sudo pacman -S qemu`
+* Redhat: `sudo dnf install qemu`
+
 
 ### Step 8 - Run QEMU
+
 Start QEMU, and point it to the ROM you just built:
 
-    $ qemu-system-x86_64 -bios build/coreboot.rom -serial stdio
+```Bash
+qemu-system-x86_64 -bios build/coreboot.rom -serial stdio
+```
 
 You should see the serial output of coreboot in the original console window, and
 a new window will appear running the coreinfo payload.
 
+
 Summary
 -------
 
+
 ### Step 1 summary - Install tools and libraries needed for coreboot
+
 Depending on your distribution you have installed the minimum additional
 software requirements to continue with downloading and building coreboot.
 Not every distribution has the tools, that would be required,
@@ -128,13 +186,16 @@ different. If that is the case for you, we'd like to encourage you to contribute
 to the project and submit a pull request with an update for this documentation
 for your system.
 
+
 ### Step 2 summary - Download coreboot source tree
+
 This will download a 'read-only' copy of the coreboot tree. This just means
 that if you made changes to the coreboot tree, you couldn't immediately
 contribute them back to the community. To pull a copy of coreboot that would
 allow you to contribute back, you would first need to sign up for an account on
 gerrit.
 
+
 ### Step 3 summary - Build the coreboot toolchain.
 This builds one of the coreboot cross-compiler toolchains for X86 platforms.
 Because of the variability of compilers and the other required tools between
@@ -144,7 +205,9 @@ part of the coreboot ROM. The toolchain provided by the operating system (the
 'host toolchain') is used to build various tools that will run on the local
 system during the build process.
 
+
 ### Step 4 summary - Build the payload
+
 To actually do anything useful with coreboot, you need to build a payload to
 include into the rom. The idea behind coreboot is that it does the minimum amount
 possible before passing control of the machine to a payload. There are various
@@ -153,7 +216,9 @@ system. Instead, we used coreinfo, a small demonstration payload that allows the
 user to look at various things such as memory and the contents of the coreboot
 file system (CBFS) - the pieces that make up the coreboot rom.
 
+
 ### Step 5 summary - Configure the build
+
 This step configures coreboot's build options using the menuconfig interface to
 Kconfig. Kconfig is the same configuration program used by the linux kernel. It
 allows you to enable, disable, and change various values to control the coreboot
@@ -164,7 +229,9 @@ before running `make menuconfig`. Due to the way that Kconfig works, values will
 be kept from the previous mainboard if you skip the clean step. This leads to a
 hybrid configuration which may or may not work as expected.
 
+
 ### Step 6 summary - Build coreboot
+
 You may notice that a number of other pieces are downloaded at the beginning of
 the build process. These are the git submodules used in various coreboot builds.
 By default, the _blobs_ submodule is not downloaded. This git submodule may be
@@ -175,11 +242,15 @@ This attempts to build the coreboot rom. The rom file itself ends up in the
 build directory as 'coreboot.rom'. At the end of the build process, the build
 displayed the contents of the rom file.
 
+
 ### Step 7 summary - Install QEMU
+
 QEMU is a processor emulator which we can use to show the coreboot boot
 process in a virtualised environment.
 
+
 ### Step 8 summary - Run QEMU
+
 Here's the command line instruction broken down:
 * `qemu-system-x86_64`
 This starts the QEMU emulator with the i440FX host PCI bridge and PIIX3 PCI to